Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Startup Repair Infinite Loop Recovery

24 Mar 2019   #550
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

copy ?:\windows\system32\config\regback\system ?:\windows\system32\config\system

You need to use the letter of your windows partition for both the ? above. That is the letter as seen from your booted media

It might be C, or it might be D or another letter. That is why you need to look to find the windows partition letter - as seen from your booted media.


Quote:
1. should i be concerned about those double entries ? one time normal and a second time with .log endings
No - because they are on the X drive ( winpe drive) - they are nothing to do with your windows installation at all - completeley irrelevant.


My System SpecsSystem Spec
.
25 Mar 2019   #551
mike34

windows 7 home premium 64 bit
 
 

there are 3 hard drives llisted and 1 that has to be the one, because its a 500GB hard drive, but shows 0 Bytes

when right clicking that drive, and going into properties, i can click on that first button, to check for errors, but then it says, "cant check for errors on the drive, because cant access the drive"

so copying those commands doesnt work

if i just type D: in CMD, to jump to that drive it says, "D: CRC error"

and so happens, when i type that command line "copy D: ... and so on

running chkdsk D: /f /r right now


Attached Thumbnails
Startup Repair Infinite Loop Recovery-d1.jpg   Startup Repair Infinite Loop Recovery-d2.jpg  
My System SpecsSystem Spec
25 Mar 2019   #552
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Yes, it looks like D is the problem.
My System SpecsSystem Spec
03 Apr 2019   #553
mike34

windows 7 home premium 64 bit
 
 

the chkdsk /f /r command does work, to make the pc boot up again

but the pc gets that infinite loop problem, almost every day, that means i have to enter the chkdsk /f /r command almost every day
My System SpecsSystem Spec
.

03 Apr 2019   #554
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Could be a problem with the disk. Safer to get a new disk. They are cheap nowadays.
My System SpecsSystem Spec
Reply

 Startup Repair Infinite Loop Recovery




Thread Tools




Similar help and support threads
Thread Forum
Startup Repair Infinite Loop Recovery
Help Guys, i did a startup repair infinite loop recovery, because my desktop hard disk wont boot normally so after the successfully of the repair, all my files in partition drive "D" is also back on the earlier files. how to get back to the previous windows registry. please help, ...
General Discussion
startup repair infinite loop after BIOS update, recovery not working
Hello, I recently attempted to update my BIOS (Gigabyte F8 to F10) so that I could upgrade my CPU from a sandy bridge to an ivy bridge. I did not do the cpu upgrade, yet, just the BIOS flash. The flash, using Gigabyte's q-flash) went fine, according to the flash results screen. I then rebooted,...
General Discussion
Startup Repair Infinite Loop Recovery
I now hope I am in the right spot to get some help. I am new at this stuff and I couldn't figure out how and where to post my problem. Now I implemented the tutorial about my problem and it worked just great except that whenever I start or restart, the problem is still there and I have to use...
Performance & Maintenance
Startup Repair Infinite Loop
Im having problems and am stuck in the infinite loop on startup repair. I have followed the tutorial https://www.sevenforums.com/tutorials/139576-startup-repair-infinite-loop-recovery.html i'm getting down to point 10 10) Type DIR and press <ENTER>, and verify that the following files and folders...
Performance & Maintenance
Startup Repair Infinite Loop
Hi, New to the forum here, hope to get some help :confused: Running windows 7 ultimate 32 bit on my computer, which ran fine until recently, where the taskbar will stop responding after I booted my computer, which eventually leads to the entire system freezing. Usually a reboot solves the...
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:25.
Twitter Facebook