Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Slipstream Windows 7 SP1 into a Installation DVD or ISO File

05 Dec 2011   #420
Brink

64-bit Windows 10 Pro
 
 

Crudo,

I'm happy to hear that you got it working now. I'm not sure what went wrong using the other way.


My System SpecsSystem Spec
.
05 Dec 2011   #421
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I find it odd but not inconceivable since the RT 7 Lite is still in beta form. beta = buggy at times Otherwise it's generally reliable at writes to flash drives as well as the other options.

Here I was looking for a way to fit the 64bit ISO on a 4gb flash drive and ended up using UltraISO for that. But that was already onhand here for other things. Why a few items were omitted is still a bit odd but does go to show you should verify both the finished ISO even extracting to a temp folder as well as crosschecking to verify all files, folders are found on a flash drive or blank dvd burned before use.

With the amount of newer updates now(200 or so) however the next test here will be to an 8gb flash drive with everything added in. First I have to order a few however. I;ve been going with 2gb, 4gb, 16gb, and 32gb sizes!
My System SpecsSystem Spec
05 Dec 2011   #422
dmxdex2020

windows 7
 
 

I got a silly error message.

64 bit service pack cannot intergrate if host operating system is 32bit.

Well im on a 64bit windows install along with using the 64bit sp1 exe.


????
My System SpecsSystem Spec
05 Dec 2011   #423
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

That's one for the books! The best advice anyone could give you on that one would be starting over fresh as you retrace all the steps you took. Take notes as you go along since that can help pinpoint where the problem is.

Just to update things here a bit for anyone preparing a new slipstreamed ISO to burn to disk or see written to flash drive with all updates Microsoft will be releasing some 20 new patches on Tuesday 12/13 of next week. These are mainly security fixes and the last being seen for 2011.
My System SpecsSystem Spec
.

28 Dec 2011   #424
derekimo

Microsoft Community Contributor Award Recipient

 
 

Quote   Quote: Originally Posted by derekimo View Post
Quote   Quote: Originally Posted by Kaktussoft View Post
But this is an easier method
Download x86 and x64 ISO. remove ei.cfg from both ISO's
install http://www.joshcellsoftwares.com/2011/09/winaio-maker-professional-all-in-one.html
and use the autoAIO option (check x64 Recovery Mode). Works perfectly!
Works perfectly indeed, Thanks!

This could not be any easier!

AIO disc from x86 and x64 iso's SP1 integrated.
I just made an AIO install disc using this method from Windows 7 Forums - View Profile: Kaktussoft

Both iso's are SP1 integrated, worked flawlessly!

No updates, fresh install with SP1.

Finished size of iso is 4.06 Gb


Attached Thumbnails
Slipstream Windows 7 SP1 into a Installation DVD or ISO File-aio-versions.jpg   Slipstream Windows 7 SP1 into a Installation DVD or ISO File-starter-sp1.jpg   Slipstream Windows 7 SP1 into a Installation DVD or ISO File-capture.jpg  
My System SpecsSystem Spec
29 Dec 2011   #425
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

I have two on a storage presently one with 27 updates along with SP 1 standing at 3.65gb. The second is an unlocked slipstream with SP 1 and IE 9 weighing in at 3.61gb. This is with the 64bit Ultimate.
My System SpecsSystem Spec
29 Dec 2011   #426
derekimo

Microsoft Community Contributor Award Recipient

 
 

Quote   Quote: Originally Posted by Night Hawk View Post
I have two on a storage presently one with 27 updates along with SP 1 standing at 3.65gb. The second is an unlocked slipstream with SP 1 and IE 9 weighing in at 3.61gb. This is with the 64bit Ultimate.
I just used the x86 and x64 SP1 iso's to make a single AIO SP1 iso with that tool, it was pretty painless.
My System SpecsSystem Spec
29 Dec 2011   #427
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

So you were able to combine both onto one disk. That had to take a bit of compression to be that low in size when you figure about 3.2gb for the 64bit alone and 2.69gb here for the final 32bit iso. Have to give the WinAIO a look to see what a finished dual ISO would look like!
My System SpecsSystem Spec
29 Dec 2011   #428
derekimo

Microsoft Community Contributor Award Recipient

 
 

Quote   Quote: Originally Posted by Night Hawk View Post
So you were able to combine both onto one disk. That had to take a bit of compression to be that low in size when you figure about 3.2gb for the 64bit alone and 2.69gb here for the final 32bit iso. Have to give the WinAIO a look to see what a finished dual ISO would look like!
It's pretty cool, it does all the work for you, except remove the eicfg.

Just use the AutoAIO button, pick a destination, point it to the iso's, enable x64 recovery mode, start compilation. It does the rest.
My System SpecsSystem Spec
29 Dec 2011   #429
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

Sounds good! I have a couple of other unlocked isos but likely wouldn't be using them anyways already running the 64bit Ultimate. But I can give them a test as well as the two other slipstreams.
My System SpecsSystem Spec
Reply

 Slipstream Windows 7 SP1 into a Installation DVD or ISO File




Thread Tools




Similar help and support threads
Thread Forum
SATA Drivers - Slipstream into Windows XP CD
How to slipstream SATA drivers into Windows XP setup CD, on your dual boot PC with Windows 7 or Vista When you install Win XP, setup can not find your Hard Drive. 1) Download & Install nLite
Tutorials
Slipstream fixes into Windows 7 SP1
Hi there since at the moment there doesn't seem any inclination for Ms to provide an SP2 for W7 - are there any decent ways to download manually (Not Install) all the updates to W7 from after SP1 to current and then slipstream these into an SP1 install set (either DVD or USB). It was easy with...
Installation & Setup
Slipstream updates into Windows 7 AIO ISO
Hi, I was wondering if it would be possible to slipstream SP1 plus post-SP1 updates into an All in one Windows 7 ISO that includes all editions of Windows 7 x64 and x86 architectures. I appreciate any help :)
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
To slipstream my upcoming Repair Install (or not to slipstream . . .)
Hi, I have experienced the SP1 install failure because not only had I been using Driver Sweeper, and Driver Cleaner.net before that. Even worse, I have switched between NVidia and ATI graphics cards two or three times, back and forth. Currently have an Nvidia card, so no ATI needed, other than...
Installation & Setup
Slipstream windows 7 - Any clues ?
Dear Friends I am new to this forum , I would like to know if there are any tools that can be used to slipstream windows 7. The windows 7 consumes around 8 to 10gb in full installation and i am unable to create a test environment because it takes around 45 minutes for a fresh installation. Plz...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 09:12.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App