Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SFC /SCANNOW Command - System File Checker

25 Sep 2017   #940
RoWin7

Win 7 Ultimate 64-bit
 
 

Actually, it's Rochelle.
Many thanks


My System SpecsSystem Spec
.
25 Sep 2017   #941
Brink

64-bit Windows 10 Pro
 
 

You're most welcome Rochelle. :)
My System SpecsSystem Spec
06 Nov 2017   #942
Jwasya01

64
 
 

Hi there Brink..
I really need you help..
I've just did sfc/ scannow and found some problem with it.
But after i restarts the win it goes blank and only mouse cursor.
I cannot get in even on safe mode.
Could you please help me..
My System SpecsSystem Spec
06 Nov 2017   #943
Brink

64-bit Windows 10 Pro
 
 

Hello Jwasya01, and welcome to Seven Forums. :)

If it doesn't eventually startup after sitting for a bit, then you might see if you may be able to boot from Windows 7 installation media or a system repair disc to do a system restore using a restore point dated before this happened.

System Repair Disc - Create - Windows 7 Help Forums
My System SpecsSystem Spec
.

07 Nov 2017   #944
Jwasya01

64
 
 

Hi Brink,
I've done that but no luck, i haven't create the restore point ��..
And i've try the sfc scannow clean image, but it say some pending and need to restart. Restarted several time but no luck.
And i've done to sfc /scannow / revertpendingactions but still no luck..
Btw for info im using thinkpad x240 win7 32, i dont have the recovery cd, and some how my pre installation on my drive is not working.
Is there any other option?
Thanks
My System SpecsSystem Spec
07 Nov 2017   #945
Brink

64-bit Windows 10 Pro
 
 

In that case, you should be able to order Windows 7 recovery media from Lenovo below for your ThinkPad x240 laptop.

How can I create, or order Recovery Media from Lenovo
My System SpecsSystem Spec
19 Feb 2018   #946
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Quote   Quote: Originally Posted by Jwasya01 View Post
Hi Brink,
I've done that but no luck, i haven't create the restore point ��..
And i've try the sfc scannow clean image, but it say some pending and need to restart. Restarted several time but no luck.
And i've done to sfc /scannow / revertpendingactions but still no luck..
Btw for info im using thinkpad x240 win7 32, i dont have the recovery cd, and some how my pre installation on my drive is not working.
Is there any other option?
Thanks
The pending/ restart scenario may have a simple solution.

Try this...
Open an Elevated Command Prompt, and run the following commands...

REG LOAD HKLM\COMPONENTS C:\Windows\System32\config\COMPONENTS
REG DELETE HKLM\COMPONENTS /V PendingRequired


reboot and then attempt Windows Update again.

Here are some instructions to make life easier :)
1) To open an Elevated Command Prompt Window (the ECP window), click on Start, All Programs, Accessories then right-click on Command Prompt, and select Run as Administrator. Accept the UAC prompt.
2) To run the commands easier, highlight the block of commands, and right-click on the highlight select Copy. In the CP Window, click on the black/white icon at top left select Paste. The commands will run but may not complete the last command, so hit the Enter Key once.
My System SpecsSystem Spec
Reply

 SFC /SCANNOW Command - System File Checker




Thread Tools




Similar help and support threads
Thread Forum
System file checker scan and fix command
The sfc /scannow command works ok on here but is there one to scan and fix such as the chkdsk /f/r What Ive got here is a really slow startup which maybe should have a different subject. I've refreshed the MBR and run Fixboot at the command prompt. I've run the special command to run sfc...
Performance & Maintenance
How restore system files when System File Checker won't work
I have run System File Checker (sfc) and it found many files that were corrupt and could not be repaired. My PC appears to be running fine - but I am anal about repairing anything that is wrong on my PC. The only suggestion I've received so far was to perform a Repair Install. That's very risky....
Performance & Maintenance
system file checker log does not show file not repaired
Ran system file checker and it said it found corrupted files but could not repair all of them. Looking at the log is not helping. I have posted the last several lines as they are representative of the entire log with the exception of the last few lines that mention an actual repair. Where is the...
Performance & Maintenance
SYstem File Checker Result - CBS.Log file says Access Denied
I have just completed a System File Check and some repairs were done I was told that the relevant report could be seen at C:\WINDOWS\LOGS\CBS\CBS.LOG. When I Clicked on that I got Access Denied How can I Open that log file? I am the Administrator
Performance & Maintenance
New System File Checker : sfc /scannow tutorial
I hope this will be a help to some and I would appreciate any feed-back. :) SFC /SCANNOW : Run in Command Prompt at Boot Edit: I've just added a Method Two to this. :)
Chillout Room


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:01.
Twitter Facebook Google+