Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: System Support Information

07 Dec 2013   #20
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by AddRAM View Post
I`m trying to change the Manufacturer and Model in the 1st two screen shots below, not the manufacturer and model in Computer Properties, I`ve already done that, shown in the 3rd shot. Is there a way to do it ? For some reason it won`t change in those 2 areas.
Hello Brian,

It looks like that would be located here in the registry. You may or may not need to restart the PC to apply.

System Support Information-system_info.jpg




My System SpecsSystem Spec
.
10 Dec 2013   #21
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

After I change and re boot it still comes back to this, it won`t stick
My System SpecsSystem Spec
10 Dec 2013   #22
Brink

64-bit Windows 10 Pro
 
 

That's what I was afraid of that it may reset if it read it from your BIOS and updated after a restart.
My System SpecsSystem Spec
10 Dec 2013   #23
AddRAM

Windows 7 Pro x64 Windows 10 Pro x64
 
 

Odd it reads it fine on lines 2 and 3 on the right hand side.

There`s just gotta be a way ooooooooooooohhhhhhhhhhhhhhhhhhhhhh
My System SpecsSystem Spec
.

10 Dec 2013   #24
Brink

64-bit Windows 10 Pro
 
 

I'll do some more digging tonight to see if I can find any other registry locations where this may be at, and post back if I find them for you to try.
My System SpecsSystem Spec
11 Dec 2013   #25
Brink

64-bit Windows 10 Pro
 
 

Well, I'm at a bust. I searched for "SystemManufacturer" using Find & Find next for all locations in the registry. I found about 3 more locations, but they only get reset after a restart.
My System SpecsSystem Spec
22 Jun 2015   #26
gilgameshau

Windows 7 Ultimate x64
 
 

Hello
I've tried this on a Windows 8.1 install and it mostly works.
The only thing missing is the logo on the Control Panel. The interesting thing is the logo appears on the "PC Info" section when using the 8.1 Metro interface.
Are there any restrictions on the type of bmp file used other than being 120x120? Possibly the number of bits for the colours or something like that.
My System SpecsSystem Spec
23 Jun 2015   #27
Brink

64-bit Windows 10 Pro
 
 

Hello Gilgameshau, and welcome to Seven Forums.

Which option did you use in the tutorial? Please go ahead and post screenshots showing this.

Screenshots and Files - Upload and Post in Seven Forums
My System SpecsSystem Spec
23 Jun 2015   #28
gilgameshau

Windows 7 Ultimate x64
 
 

Hello,
I used the option to use regedit but I didn't put an entry in for all fields. Below is an export of the relevant entries I made. With the exception of the control panel logo the data is displayed correctly. I would like to upload the logo but bmp isn't a valid type for uploading. But I am attaching screen shots of the control panel and the PC Info screen.

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\OEMInformation]
"Logo"="C:\\Windows\\System32\\Hitmen.bmp"
"Manufacturer"="Hills Information Technology Men (H.I.T.Men)"
"SupportPhone"="xxxx-xxxx"
"SupportURL"="http://xxxx.xxxx.net/"


Attached Thumbnails
System Support Information-cp.jpg   System Support Information-pc.jpg  
My System SpecsSystem Spec
23 Jun 2015   #29
Brink

64-bit Windows 10 Pro
 
 

I don't see anything wrong with it. You might test with a smaller .bmp to see how it does.
My System SpecsSystem Spec
Reply

 System Support Information




Thread Tools




Similar help and support threads
Thread Forum
missing OS name in system properties and system information
Hello, I'm new here... need some assistance for my Windows... After I updated to Service Pack 1 from Windows Update (online update), I founded there's no OS name and OS version in System Properties like usual. Same with System Information. Is there any solution for this? Thanks before... ...
General Discussion
SIV (System Information Viewer)
There are plenty of system information software out there, SIW, Everest, Sandra, Speccy, etc. And I wasn't expecting any reason to keep this one, but figured I'd try it. I'm keeping it. It gives some very detailed information, and doesn't require installation, just extract to a folder. Version...
Software
Support Information and Logo & Delete Unnecessary stuff
Normally i have used Tune Up utillities for this but i want to be able to do this manually on systems i build. See below images to see what i mean 1st image how do i edit the support info without using tune up? Im sure there is a way. 2nd image how to delete these old back ups and Unnecessary...
Customization
Software to log all the information on a system
Hello Friends, I need a software which could save the information when a file is copied from my system to a flash drive, when a person logs into the system, when a person uses internet...I need it for all applications used by the user to be logged in that software.Is it...
Software
System Information Shows I Have 2Gb Ram, When I have 6GB
I have 6GB of Ram, But my System Information is telling me i have only 2GB? Dose this mean its only using 2GB/ 6Gb, or i need to activate another 4GB? Thanks
Performance & Maintenance
C:\System Volume Information
C:\System Volume Information I have system protection(restore) turned off. And it has 4GB of data in C:\System Volume Information. How can this be. It is also allowing me to go back to a restore point. Windows 7RC 64Bit.
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:07.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App