Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Display Color Calibration

27 Sep 2012   #60
Brink

64-bit Windows 10 Pro
 
 

Quote   Quote: Originally Posted by xraychick View Post
So, I have an issue. Intel Common User Interface Module nor igfxpers.exe is listed in msconfig "startup" tab or "programs and features".

I searched for it by going to start>search. It listed the program and I right clicked on it and selected open file location. It's listed under computer>local disk (C: )>windows>system32. Would it be safe to delete it from here??
No, you wouldn't want to just delete it like that.

If you like, go ahead and post screenshots showing everything in the right pane of these registry locations below to see what all you have in your startup options. I'll be happy to take a look to see if it may be hiding here somewhere.
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run



My System SpecsSystem Spec
.
27 Sep 2012   #61
xraychick

Win 7 Home Premium 64-bit
 
 

Quote   Quote: Originally Posted by Brink View Post
No, you wouldn't want to just delete it like that.

If you like, go ahead and post screenshots showing everything in the right pane of these registry locations below to see what all you have in your startup options. I'll be happy to take a look to see if it may be hiding here somewhere.
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run
  • HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Policies\Explorer\Run
  • HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Windows\CurrentVersion\Run
Well, after searching on the web some more I found a post where someone went into Intel Graphics and Media from the control panel. Here he was able to adjust hue, saturation, gamma, contrast, and brightness and save those settings. Apparently it fixed his problem of the display settings not saving. I tried this trick myself, and so far I'm happy to report that it has worked. The settings haven't once reverted back to factory default. I hope this is a permanent solution for me. I was getting very irritated with it. I want to thank you for being so helpful and patient!
My System SpecsSystem Spec
27 Sep 2012   #62
Brink

64-bit Windows 10 Pro
 
 

I'm happy to hear that you got it sorted. Thank you for posting back with your results and solution.
My System SpecsSystem Spec
18 Oct 2012   #63
TheKloowner

Windows 7 Ultimate x64
 
 

I have an error with this, and when i saved the calibration, it says not found..
My System SpecsSystem Spec
.

18 Oct 2012   #64
Brink

64-bit Windows 10 Pro
 
 

Hello TheKloowner,

Could you please post back with the exact error message, and give more details?
My System SpecsSystem Spec
19 Oct 2012   #65
TheKloowner

Windows 7 Ultimate x64
 
 

Element not found...
Attached in image

Close another programs that it can be open.. etc etc


Attached Images
Display Color Calibration-letra.png 
My System SpecsSystem Spec
19 Oct 2012   #66
Brink

64-bit Windows 10 Pro
 
 

You might see if you may be able to do this in Safe Mode.

If not, then check to make sure that you have the correct and lastest video driver installed, and try running a sfc /scannow command to see if you have any corrupted system files that may responsible.

Hope this helps for now.
My System SpecsSystem Spec
19 Oct 2012   #67
TheKloowner

Windows 7 Ultimate x64
 
 

Quote   Quote: Originally Posted by Brink View Post
You might see if you may be able to do this in Safe Mode.

If not, then check to make sure that you have the correct and lastest video driver installed, and try running a sfc /scannow command to see if you have any corrupted system files that may responsible.

Hope this helps for now.
Ok, no one corrupted files, all okay because yesterday i do a repair install.

Now i will check in safe mode, thanks.


Another error, in safe MODE:

Calibration screen can not calibrate the screen because it can not determine whether is reflected.
Screen color calibration can not calibrate a screen that reflected
My System SpecsSystem Spec
23 Oct 2012   #68
TheKloowner

Windows 7 Ultimate x64
 
 

Any help? i reinstalled graphic driver and nothin..
My System SpecsSystem Spec
23 Oct 2012   #69
Brink

64-bit Windows 10 Pro
 
 

I'm afraid that I don't know what else to try other than adjusting the color settings on the monitor itself.
My System SpecsSystem Spec
Reply

 Display Color Calibration




Thread Tools




Similar help and support threads
Thread Forum
Display Color Calibration ALWAYS resets?! Please Help!
Hi, I recently got windows 7 for my desktop, and I have this 22'' monitor which looks really nice when properly calibrated (gamma, reds, etc). My problem is that every time I do a calibration, and let the computer either go to sleep, lock, turn off, the calibration resets to this ugly looking...
Graphic Cards
Color profiles calibration?
I'm setting up a new install of Win 7 Professional, the screen was a little pink, so I color calibrated. But when I re-boot it jumps back to the pink profile just after re-booting. How do I save the calibration after adjusting and how do I get it to stick? I've never used color calibration before...
General Discussion
Reset/Reverse/Undo Color calibration?
I used the color calibration to change the gamma from default and now I want to change it back... how do I reset/undo the changes I made with color calibration to default/stock?
Customization
Display Color Calibration
When I run the Display Color Calibration to alter the gamma cos it is too bright for me, It resets after any reboot or shutdown is there any way to keep the adjusted setting after shutdown/reboot ? Andy
General Discussion
Color Calibration, problem.
Dear all, I have Windows 7 Professional 32-bit RTM (build 7600) (latest updates) I went to Personalize> Display> Calibrate color> I then calibrated my color be decreasing the gama etc etc etc, and it works fine. but if i restart my computer all that i have done resets back to default....
General Discussion
Windows 7; Need 32 bit Color Calibration
I need 32 bit color to calibrate color & run windows media center; and my video card is not compatible with display driver model WDDM. All my settings & adjustments make everything way too big or way too small and blurry in windows 7. I'm set up with dual boot xp-sp3 and windows 7 build 7000. ...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 21:43.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App