Startup Repair

please find the log in your recommended location in the first post of yours.
Startup Repair diagnosis and repair log

Code:

---------------------------
Last successful boot time: ‎8/‎14/‎2017 6:55:28 AM (GMT)
Number of repair attempts: 1

Session details
---------------------------
System Disk = \Device\Harddisk0
Windows directory = D:\Windows
AutoChk Run = 0
Number of root causes = 1

Test Performed: 
---------------------------
Name: Check for updates
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: System disk test
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Disk failure diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 79 ms

Test Performed: 
---------------------------
Name: Disk metadata test
Result: Completed successfully. Error code =  0x0
Time taken = 15 ms

Test Performed: 
---------------------------
Name: Target OS test
Result: Completed successfully. Error code =  0x0
Time taken = 156 ms

Test Performed: 
---------------------------
Name: Volume content check
Result: Completed successfully. Error code =  0x0
Time taken = 547 ms

Test Performed: 
---------------------------
Name: Boot manager diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 78 ms

Test Performed: 
---------------------------
Name: System boot log diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Event log diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 94 ms

Test Performed: 
---------------------------
Name: Internal state check
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Boot status test
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Setup state check
Result: Completed successfully. Error code =  0x0
Time taken = 1047 ms

Test Performed: 
---------------------------
Name: Registry hives test
Result: Completed successfully. Error code =  0x0
Time taken = 4000 ms

Test Performed: 
---------------------------
Name: Windows boot log diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Bugcheck analysis
Result: Completed successfully. Error code =  0x0
Time taken = 2156 ms

Test Performed: 
---------------------------
Name: Access control test
Result: Completed successfully. Error code =  0x0
Time taken = 26265 ms

Test Performed: 
---------------------------
Name: File system test (chkdsk)
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Software installation log diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Test Performed: 
---------------------------
Name: Fallback diagnosis
Result: Completed successfully. Error code =  0x0
Time taken = 0 ms

Root cause found: 
---------------------------
Unspecified changes to system configuration might have caused the problem.

Repair action: System Restore
Result: Completed successfully. Error code =  0x0
Time taken = 154406 ms

---------------------------
---------------------------

Hello jraju, :)

That would be the startup repair log. It shows this below as the cause, and did a system restore to repair.

Code:

Root cause found: 
---------------------------
Unspecified changes to system configuration might have caused the problem.

Repair action: System Restore
Result: Completed successfully. Error code =  0x0
Time taken = 154406 ms

I'm afraid that's all the details it provides.

Basically, it found an "unspecified" (aka: unknown) change to your system configuration, and did a system restore to undo the change.

You could try doing a system restore using a restore point dated before you got this exploreframe.dll issue to hopefully fix it.

How to Do a System Restore in Windows 7

Hello Maf9222, and welcome to Seven Forums.

What are the questions it's asking you?

jraju said:

Hi, Brink,
Long time no see.
No error in startup repair. All the repair consists of 0x0 enoting nil error
But , i get unspecified error in system configuration to be the cause of the problem.
It alerted system restore and i got the windows boot up to normal
My query is,
which unspecified error.
i checked memory no error
i checked sfc /scannow no error.
what would have the erro it would have found it.
Will there be any logs left, other than startup logs located in system 32 logs.
If this coud be found out, then we could see that what causes the problem be found and sollution applied.
Any idea , brink

Hello jraju,

Is this something that happens each time you boot, or just a one time issue?

Does your startup repair log below have anything else in it?

C:\Windows\System32\Logfiles\Srt\SrtTrail.txt