Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Partition - Mark as Active

25 May 2012   #20
Jonathan_King

Windows 7 Professional x64
 
 

What are you trying to do here? I assume marking the partition as active is not your end goal; perhaps we can get to the root of the matter without worrying about a System label.


My System SpecsSystem Spec
.
29 May 2012   #21
herbun

Windows 7 Professional 64bit
 
 

I am trying to install sp1 on a win7 home premium machine. The system partition should be active for updating, but since I could not do that yet, I do not know if that would resolve my sp1 update problem. See thread here:
7 SP1 Update problem, automount
My System SpecsSystem Spec
17 Aug 2013   #22
armyjams

Windows 7
 
 
THANK YOU GREGROCKER!!!

Quote   Quote: Originally Posted by gregrocker View Post
We use this tutorial many times every day to rescue Win7.
Greg, I would like to thank you from the bottom of my heart for having this link! What a life saver! My son's Dell Inspiron M5110 crashed and we could not get it to do anything but f12 and f2. I had the Official Dell Disk set, but even when reinstalling Windows 7, I would get "Missing Operating System" on restart! I was going crazy. I work on the laptop for hours on my own, then 5 hours with different Dell support to no avail! I did what you said above, the first time I got a command control screen on restart, whoops, wrong partition. I got back in using the windows disk, did what you said again but partitioned a different number. Walla! Bells and whistles, I got it to reinstall windows from scratch! My God's Blessing be upon you! Thank You!
My System SpecsSystem Spec
16 Sep 2013   #23
samarthya

Windows 7
 
 

Thanks Guys!! the diskpart did it for me.
My System SpecsSystem Spec
.

25 Feb 2015   #24
shanemckiness

Iowa
 
 

Need help. Minitool partition wizard is not working. I get the option to select it after rebooting with a flash stick, but then when I select it, I get this message

error:/boot/bz/image3 has invalid signature
error: you need to load the kernel first

press any key to continue.

I need to active the mbr as I deactivated not knowing what I was doing, now the cpu will not start, end of story. PUtting a 2nd hard drive in will not work either since windows will not recognize the 2nd drive.
My System SpecsSystem Spec
Reply

 Partition - Mark as Active




Thread Tools




Similar help and support threads
Thread Forum
System does not boots "Mark Partition as Active"
Hi all, I have a HP dv3-2314tx laptop, Windows 7 Home Premium 32-bit OS which has two disk drives(C,D). D for recovery. C drive contains OS and all my files. In Disk Management I marked C drive as "Mark Partition as Active". It was sowing some warning. But I pressed OK button. Now my laptop is...
General Discussion
Partition - Mark as Inactive
How to Mark a Partition as Inactive in Windows 7 and Vista Marking a partition as active on a basic disk means that the computer will use the loader (an operating system tool) on that partition to start the operating system. Marking a partition as active if it doesn't contain the loader for...
Tutorials
How to change active partition without removing data from partition?
Hi Folks, I have contrived to get two active partitions on my PC! After a 2 week old hard drive (D: & F -) died I replaced (now F & G) it with an old drive that had previously been configured with XP and as a boot drive. I don’t think it is acting as boot as drive C: has an active partition and...
General Discussion
System does not boot "Mark Partition as Active" .
hi all, I have a HP mini , which comes with windows 7 starter preinstalled . so, i which has 2 disk drives c,d and the HP recovery . in disk management i marked (HP recovery) "mark partition as active " , pressed ok on the warnings . the problem is that my laptop doesn't boot and gets to the HP...
General Discussion
Can't mark OS partition as Active
Greetings, After formatting my new laptop, I deleted the manufacturer recovery partition, the 100MB partition, resized, merged, created a new Data partition, etc. However, I cannot mark my OS partition (C:) as Active; I can only make my Data (D:) partition Active. Please advise.
Installation & Setup
How can i create a new partition to mark it as active ?
I followed the limneos 's guide in this thread : https://www.sevenforums.com/installation-setup/2774-osx-windows-7-dual-boot.html And now i'm stucked at the step : Creating partition to install mac OSX and mark it as active . I really don't know how . I opened the manage as admin and right click...
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:41.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App