Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SATA Drivers - Slipstream into Windows XP CD

02 Feb 2011   #100
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by VoLtrex31 View Post
I took a look at the mother board driver CD and found that it has a folder named RAID with a jmb363 folder inside..
and a driver folder, may be this is what i need?
Your file i did not found, not i on the site and not in the disk..
ASUSTeK Computer Inc.

P5K-E/WIFI-AP

SATA Drivers - Slipstream into Windows XP CD-capture1.png

P5K-E

SATA Drivers - Slipstream into Windows XP CD-capture2.png




My System SpecsSystem Spec
.
02 Feb 2011   #101
VoLtrex31

Windows 7 x64 ultimate
 
 

I have looked every where and still did not found that download.. i have P5K with out that 'e' ..
My System SpecsSystem Spec
02 Feb 2011   #102
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by VoLtrex31 View Post
I have looked every where and still did not found that download.. i have P5K with out that 'e' ..

ICH9R_IMSM_Makedisk.zip


My System SpecsSystem Spec
02 Feb 2011   #103
VoLtrex31

Windows 7 x64 ultimate
 
 

And?.. its a driver cd with option for F6 with floppy disk which i don't have..

Any ways thank you for the help but its a no go.. drivers are just stronger then me..
My System SpecsSystem Spec
.

13 Feb 2011   #104
drifking8887

windows 7
 
 

Enter BIOS and do the following:

Enter Integrated Peripherals>On-Chip IDE Configuration
On-Chip ATA(s) Operate Mode:[Native Mode]
ATA Configuration:[P-ATA Only]
S-ATA Keep Enabled:[Yes]
P-ATA Keep Enablednot available)
P-ATA Channel Selection:[Both]
Combined Mode Optionnot available)
S-ATA Ports Definition:P0-3rd. / P1-4th or P0-1st. / P1-2nd.

but i use this to
ms=6788 or 848P Neo desktop machng
its works for me credites go to thunder in msi -forum
My System SpecsSystem Spec
20 Mar 2011   #105
Paper

Windows 7 Home Premium 64bit
 
 

Hi
I made the iso cd, booted from it, but it gave me an error, "The iaStor.sys file is corrupted".
CPU-Z shows that I have an Intel P35/G33/G31 chipset.
I downloaded the drivers from http://downloadcenter.intel.com/Sear...90&FamilyId=40
The 64-bit version since I have Windows 7 Home Premium 64-bit.
Did I download the wrong file or do something wrong?
Thanks in advance.
My System SpecsSystem Spec
20 Mar 2011   #106
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by Paper View Post
Hi
I made the iso cd, booted from it, but it gave me an error, "The iaStor.sys file is corrupted".
CPU-Z shows that I have an Intel P35/G33/G31 chipset.
I downloaded the drivers from http://downloadcenter.intel.com/Sear...90&FamilyId=40
The 64-bit version since I have Windows 7 Home Premium 64-bit.
Did I download the wrong file or do something wrong?
Thanks in advance.
First check for all the Win XP drivers for your hardware on the manufacturer's web site.
If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot

If you have a Intel Sata Controller.
You can download your F6 Sata Controller drivers from here:

Intel Sata Controller Drivers

Can you post your specs.
Filling out System Specs
Dont Know What Hardware You Have..??
VistaForums SysInfo Tool - Vista Forums

Do you slipsteam all sata conrtroller model's in.
My System SpecsSystem Spec
16 Apr 2011   #107
zapper067

Windows 7 Home Premium 32bit
 
 

when i inserted the disk ,when they say setup is loading windows the com crashes.I use Gateway sx 2850.Help!!!The xp disk has no drivers because when i put the drivers in the 7 com dont boot from it anymore...
My System SpecsSystem Spec
16 Apr 2011   #108
theog

Microsoft Community Contributor Award Recipient

ME/XP/Vista/Win7
 
 

Quote   Quote: Originally Posted by zapper067 View Post
when i inserted the disk ,when they say setup is loading windows the com crashes.I use Gateway sx 2850.Help!!!The xp disk has no drivers because when i put the drivers in the 7 com dont boot from it anymore...
First check for all the Win XP drivers for your hardware on the manufacturer's web site.
If your Win XP CD, does not support your Sata Controller, you will need to load drivers to uses at F6.
Load Sata Controller drivers with a floppy disk is the best way.
SATA Drivers - Load in Windows XP Setup on Dual Boot
OR
SATA Drivers - Slipstream into Windows XP CD

Your Gateway sx 2850 has a Intel Sata Controller.
You can download your F6 Sata Controller drivers from here:
Gateway Support - Downloads & Support Documents - Desktop / SX Series / SX2850
My System SpecsSystem Spec
17 Apr 2011   #109
zapper067

Windows 7 Home Premium 32bit
 
 

But I dont understand why it crashes instead of showing that no sata drivers are loaded???
My System SpecsSystem Spec
Reply

 SATA Drivers - Slipstream into Windows XP CD




Thread Tools




Similar help and support threads
Thread Forum
Create slipstream install usb w/drivers/updates?
I purchased a new SSD and doing a fresh install. I am curious if it would be easier or ideal to create an installation disk/usb with all the added windows updates and drivers for my system(if possible)? Originally I had Windows Vista Ultimate and then upgraded to Windows 7 Ultimate. So, I have the...
General Discussion
Slipstream SATA drivers into XP setupCD,which driver to be chosen,pls?
Hell All, I am trying to slipstream SATA drivers into Windows XP setup CD for dual boot with window 7 following this tutorial in method two (window 7 is installed first) https://www.sevenforums.com/tutorials/72185-sata-drivers-slipstream-into-windows-xp-cd.html . at step 12 to...
Installation & Setup
SATA driver for Windows XP Slipstream
I would like to try installing a dual boot of Windows XP Professional x86 with Windows 7 Professional x64 on a single hard drive. I gave up last time but decided to try one last time. My question is about the SATA driver for my Seagate Barracuda HD. Now, the XP Professional x86 I am going...
Installation & Setup
Possible to slipstream all W7 drivers to XP CD?
I'm new to slipstreaming and my question isn't really how to slipstream (there are great tutorials here I've been reading) but rather if it's possible to copy the drivers from my W7 DVD to essentially make XP installable on newer hardware and capable of detecting with newer hardware and devices. ...
Drivers
Slipstream Drivers and N-light.
Ok, I'm currently in the process of setting up xp as a dual boot option on my windows 7 rig. Since im running in RAID I needed to slipsteam the drivers for xp via nlight. (which I did) I slipstreamed them via txt mode and am now currently burning the disc. Do I have to do anything to get...
Drivers
How to slipstream graphics drivers
I have the Intel Q45/Q43 Express Chipset on my Asus P5Q-EM DO motherboard. Video drivers installed with Windows Beta 7057 worked perfectly but when I clean-installed Windows 7100 RC, the drivers were updated to a newer version and now my desktop and background video gets totally corrupted after...
Drivers


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 00:15.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App