New
#100
opened up the MBR "configuration settings" file. Below is it's contents. Does this help?
; English HP 12/02/02
; V1.9e Modified System Lock Message - added Boot Switches
; v1.9g UseSmallMBR=1 / STR_START=""
; v2.0d
; line feed before "Press any key..." etc.
; ShowRecoveryPart=1
; SwapPart=0 04/04/02
; v2.2b1 Replaced HP by tag %BRANDNAME% in STR_NO_PASSWORD (section [BootLoader])
[PEImage]
Verify=1
LeaveFreeSpace=300
Absolute_Size=0
ImageSize=8000
[BootLoader]
RecoveryPartition=1
;QuickplayPartition=1024
RecoveryPartitionOnStartOfDisk=0
; Boot loader timeout for "\nOperating system found.\nPress 'R' to display System Recovery options.\n"
TimeOut=0
; answer key for "nNo operating system installed or partition corrupted.\nPress 'R' to perform a full System Recovery.\n"
ANSWER_FullRestore="R"
; answer key for "\nOperating system found.\nPress 'R' to display System Recovery options. "
ANSWER_SHOW_MENU="R"
; answer key for "Press 'F' to format the hard drive and perform a full System Recovery."
ANSWER_DESTROY_HD="F"
; answer key for "Press 'R' for standard System Recovery options."
ANSWER_BOOT_PE="R"
; answer key for "Press 'Q' to Quit."
ANSWER_BOOT_XP="Q"
; answer key for "\n\nPlease confirm with 'Y' to format drive and install a new operating system.\n"
ANSWER_YES="Y"
; Error strings
STR_CD_READ_ERR="\nCD/DVD read error!"
STR_HD_WRITE_ERR="\nHard drive write error!\n"
STR_ERROR="\nNon-System disk or disk error\n"
STR_PRESSAKEY="\nPress any key to continue.\n"
STR_HD_TOO_SMALL="\nERROR: The hard drive is too small for the recovery!\n"
; Menu Strings
STR_HD_ERROR="\nNo hard drive found.\nPC Recovery cannot be continued!\n"
STR_CD_ERROR="\nError! Unable to detect CD/DVD drive.\nPC Recovery cannot be continued!\n"
STR_PT_ERROR="\nNo operating system installed or partition corrupted.\nPress 'R' to perform a full PC Recovery.\n"
STR_ASK_RESTORE="\nPress 'R' to display PC Recovery options. "
STR_MENU_OPTIONS="\nPress 'R' for standard PC Recovery options.\n\nPress 'F' to format the hard drive and reinstall the original factory settings.\n All data will be lost!\n\nPress 'Q' to Quit this menu.\n"
STR_CONFIRM_FORMAT="\n\nPress 'Y' to format the hard drive and reinstall original factory settings.\nPress 'Esc' to exit this menu."
STR_NORMAL_BOOT="\n\nBooting PC..."
STR_RECOVERY_BOOT="\n\nStarting recovery...\n"
STR_COPY_TO_HD="\nPreparing recovery partition - please wait.\n"
STR_CURRENT_SIZE="\nThe current recovery partition size in MB is ";
STR_GET_IMAGE_SIZE="\nPlease enter the new size "
; Startup stuff
STR_WRONG_BLOCK="Error! Could not verify CD-ROM image.\n"
STR_SEARCH_CDDRIVE="Detected CD-ROM as drive "
STR_SEARCH_IMAGE="Detected boot image on LBA "
; Password stuff
STR_NO_PASSWORD="\nThese PC Recovery discs do NOT support this PC model. "
LockSystem=1
SystemPassword="Hewlett-Packard"
LockSystem2=0
; Max 4 chars!
SystemPassword2="****"
;5.0.42
PasswordsOn_HD=2
Use_Harddisk_Lock=0
OEM_Option123=1
OEM_Option007=5B03
OEM_Option008=8906
;IF AskCreateRecoveryPartition=1 THEN the boot loader will ask STR_ASK_CREATE_RP
AskCreateRecoveryPartition=0
;IF asked for Yes or NO, this is the NO letter
ANSWER_NO="N"
;...
STR_ASK_CREATE_RP="\n\n\n\nDo you want to create a recovery partition on the hard drive?\n\n * Press 'Y' to create the recovery partition used for standard PC\n Recovery.\n\n * Press 'N' to bypass creating the recovery partition and always recover\n directly from PC Recovery discs."
;Message for Magneto scenario
STR_REMOVE_USB="\n Warning - You must remove the HP Personal Media Drive or any other external\n media drive from the system before attempting system recovery. Data will be\n erased if the external drive is left in the system. Remove any such device\n and press any key to continue. "
;STR_REMOVE_CD2BOOT="\n Warning - You must remove the HP Personal Media Drive or any other external\n media drive from the system before attempting system recovery. Data will be\n erased if the external drive is left in the system. Remove any such device\n and press any key to continue. "
STR_REMOVE_CD2BOOT=\n Please remove the CD/DVD and press a key to reboot. If the PC boots on the\n hard disc re-insert the CD/DVD !
[MasterBootRecordOld]
UseSmallMBR=1
SwapPart=0
CountMode=5
RecoveryInUserPart=0
;TimeOut for "\nPress F10 to start recovery "
TimeOut=1
;STR_BS_ERROR="\nMissing OS\n"
STR_BS_ERROR=" "
STR_ERROR="\nMBR Error\n"
;STR_PRESSAKEY="\nPress a key.\n"
STR_PRESSAKEY=" "
;STR_START="\nPress F10 to start recovery "
STR_START=" "
QuietCountDown=0
AutoHideRecovery=0
ShowRecoveryPart=1
ScanCode=133
[MasterBootRecord]
; DO NOT TRANSLATE
UseSmallMBR=1
SwapPart=1
;TimeOut for "\nPress F11 to start recovery "
TimeOut=1
QuietCountDown=1
AutoHideRecovery=0
ShowRecoveryPart=1
ScanCode=133
;DoRecoverRP=0
SafebootCompatibleMBR=0
CountMode=1
; TRANSLATE
STR_START="\nPress F11 for Emergency Recovery "
;STR_ERROR="\nMBR Error\n"
STR_ERROR=\nErr1
;STR_BS_ERROR="\nOS Missing\n"
STR_BS_ERROR=Err2
;STR_PRESSAKEY="\nPress a key.\n"
STR_PRESSAKEY=Err3
RecoveryInUserPart=0