New
#1920
pleasee helppP! (((((( i hawe laptop! and win7 ultimate 32bit..now i try to make dual-boot..i instal win xp...in another partition! I INSTAL WIN XP! butt when i start my PC,i don't hawe choice to use win7 or win xp!! my english is bad,I know,,soryy!! but i don't understand what to do!! now when i go in d drive (where before there was win7) i hawe instalation of win 7..and when i go in disk E i see instalation of win xp..but howw to put dual boot..sory but help pleasee ((((((((( !!
Boot into Windows 7 DVD System Recovery Options or Windows 7 System Repair Disk to Mark Win7 or it's 100mb System Reserved Partition (preferred if you have it) Active.
Then run Startup Repair - Run up to 3 Separate Times until Windows 7 starts and it's boot partition holds the System Active flags.
Next install EasyBCD (click Download - no Name or Email required), on Add OS Entry tab add XP by name, type and drive letter. Save and reboot. You should have a Dual Boot menu with both choices.
Hello,
i Really need some Help iam Stuck since 6 Hours on this.. all Worked fine i got a Bootmenue etc.
but i cant finish my WinXP installation i always get this Error 0x0000007B wich is usual a sign for "INACCESSIBLE_BOOT_DEVICE"
but i Loaded my SATA Drivers on Nlite and got them on the Winxp CD and i even saw them getting Copied while Starting WinXP installer do i have to Copy other Drivers too? like Board,Sound,USB whatever...?
Btw iam Using an Asus P8B75-M LE Mainboard and 1x 8Gig Ram No Raid just 1 SATA HDD
Iam Happy for anykind of Help allrdy installed and deleted it like 10 Times and getting crazy here
Sorry for the Bad English
Are you using XP SP3 installer? Does it see the HD partitions when you boot it and arrive at the Drive Selection screen? Are you full formatting the partition you create there?
When does the error occur exactly?
If you're trying to install it with Win7 already on the HD, is the SATA controller set to IDE in BIOS setup? This may be required to install XP. If you have another HD I would also try wiping it first with Diskpart Clean Command then partition and full format with XP installer. Do this with the Win7 HD unplugged.
I would strongly consider virtualizing XP using XP Mode, VIrtual Box, VM Ware, etc. since XP is almost too old to install on modern hardware.
I used first 3-4 times one with SP2 than Organized one with SP3 (XP Prof 32bit SP3)
Yes it sees all Partions when iam at the Drive Selecion
Yes i was Formatting it before
After i select the Drive it Copys all the Data wait some Minutes while Copy etc.. than when it says 15sec to Restart or use Enter i [Enter] PC rebooting than i get the XP Starting/Loading Screen and right after that this Bluescreen with this Error
Jeah but i need it iam getting while Gaming Errors on my PC Coloured Screens with Different Colours after some Minutes sometines Hours of WoW so i changed PC Hardware 2 Times than the PC Shop changed it a 3th time and gave another Board,HDD etc and i still got this Problem so we Figured out that this is maybe a Problem with my Hardware+Win7+WoW and i was going to try it with WinXP since i though in Vista Compatibel Mode it seems to work
Try with a HD freshly wiped with Diskpart Clean Command to clear the boot sector.
i got only one HDD and it was "fresh" 1 PArtion Win7 works fine the other was suppsoed to get Winxp the HDD was just liek 5 Hours old new Bought
Sometimes it works better to install XP first, if necessary to a wiped HD. Then when you install Win7 afterwards it should also configure the Dual Boot for you.
As Asus P8B75-M LE has a uEFI/BIOS firmware, 1x 8Gig Ram. Win XP x32 can only use 3.25 ram.
Have you looked at using XP Mode, Virtual Player, VMWare, Virtual Box.
Windows XP Mode - Install and Setup