Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Fan Speed Controller - Build your Own

28 Dec 2011   #40

Windows 7 Ultimate x64

Hi All

Excellent thread BTW, My 600T fan controller died on me yesterday (seems to be a common fault on this case) so was looking at building my own to replace it. From what i have seen you have been using a single potentiometer per fan. What would the calculation be for running multiple fans off a single potentiometer?? (is this recommended??)

I am wanting to run 4 fans (3 different types) off this single controller.

My System SpecsSystem Spec
30 Dec 2011   #41


AFB1212SHE-F00 120x120x38 mm, 151.85 CFM @ 3700 RPM, 53.0 dBA, 12.60 watts, 1.05 amps, Maximum Air Pressure 14.50 mm HO, 12v


AFB1212GHE-CF00, 120x120x38mm, 240.96 CFM @ 5200 RPM, 62.0 dBA, 27.48 watts, 2.45 amps, Maximum Air Pressure 27.48 mm HO, 12v DC

what type of potentiometer for these to go from 3v-12v for fans. if possible or is better to use minuscule variable resistors & what type would I need for these.

thank you for the help
My System SpecsSystem Spec
27 Dec 2012   #42

Windows 7 Ultimate 32bit
A little help please?

Hey there, Nice tutorial. I really like your front panel and was wondering if you could please send me the links to the pots and dials that you used in your mod. I assume you need the same ones for a standard 12v fan? I am using 5 stock NZXT 120mm 12v fans btw.

Thanks for your help
My System SpecsSystem Spec

 Fan Speed Controller - Build your Own

Thread Tools

Similar help and support threads
Thread Forum
Ethernet Controller Link Speed is locked at 10 Mbps.
My network card is a Realtek PCIe FE Family Controller. I don't know what caused this problem but my Realtek driver is up-to-date, and previously it was a link speed of 100 Mbps. But now for some reason it suddenly dropped to a link speed of 10 Mbps and I've tried a...
Network & Sharing
SATA AHCI Controller, IDE DVD RW slow speed
I have 2 IDE DVD drives (TEAC DV-W516D DVD/CD ReWriter, and TSSTcorp DVD-ROM SH-D162C DVD/CD Reader). Teac is capable of 16X DVD writting. My motherboard Gigabyte Z77-D3H has only SATA II/III slots. So I connected each IDE optical drive to motherboard's SATA II slot(s) using IDE to SATA I adapters...
Hardware & Devices
Fan Speed Controller
My Antec 300 case came with 2 case fans that have a switch H M L switch on them... and it is kind of a pain in the ass to open the case to switch the fan speeds. I usually keep them on low for noise reduction, but during gaming or other heat intense work id like them to ramp up a bit to keep the...
Hardware & Devices
[Project] Fan Speed Controller
Alright! I finally succeeded in getting the first third of my fan controller completed. I thought I would post a picture of what it looks like right now: What do you all think? I have it plugged into my side fan for now, and have left it on full speed. The issues I have run into are:...
PC Custom Builds and Overclocking
Xbox 360 Controller Bug in Build 7068?
I have used my Xbox 360 wired controller with my PC for a while, on both XP and Vista prior to installing Windows 7 Betas. The first time I noticed this was with build 7068 x64, which is what I am currently using. If anybody else has a wired xbox 360, let me know if you can reproduce this. If I...

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 18:11.
Twitter Facebook