Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SF Diagnostic Tool - Using for Troubleshooting

05 Apr 2013   #150
Brink

64-bit Windows 10 Pro
 
 

You're welcome Ace.


My System SpecsSystem Spec
.
19 Apr 2013   #151
MagboneD

Win7x64 Pro
 
 

Greetings, I could use a little help here. Been having BSODs a lot lately. Tried running the diagnostics tool, but...

I get the following exception when I try to run the tool:

Code:
 
************* Exception Text **************
System.IO.DirectoryNotFoundException: Could not find a part of the path '\\Desktop\SF_19-04-2013'.
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.Directory.InternalCreateDirectory(String fullPath, String path, DirectorySecurity dirSecurity)
at System.IO.Directory.CreateDirectory(String path, DirectorySecurity directorySecurity)
at System.IO.Directory.CreateDirectory(String path)
at SF_Diagnostic_Tool.Form1.Button1_Click(Object sender, EventArgs e)
at System.Windows.Forms.Control.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnClick(EventArgs e)
at System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
at System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
at System.Windows.Forms.Control.WndProc(Message& m)
at System.Windows.Forms.ButtonBase.WndProc(Message& m)
at System.Windows.Forms.Button.WndProc(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
 
 
************** Loaded Assemblies **************
mscorlib
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5466 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
----------------------------------------
SF Diagnostic Tool
Assembly Version: 5.0.0.6
Win32 Version: 5.0.0.6
CodeBase: file:///C:/Users/dagbel/Desktop/SF_Diagnostic_Tool.exe
----------------------------------------
Microsoft.VisualBasic
Assembly Version: 8.0.0.0
Win32 Version: 8.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/Microsoft.VisualBasic/8.0.0.0__b03f5f7f11d50a3a/Microsoft.VisualBasic.dll
----------------------------------------
System.Windows.Forms
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5468 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
----------------------------------------
System
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
----------------------------------------
System.Drawing
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5467 (Win7SP1GDR.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
----------------------------------------
System.Runtime.Remoting
Assembly Version: 2.0.0.0
Win32 Version: 2.0.50727.5420 (Win7SP1.050727-5400)
CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Runtime.Remoting/2.0.0.0__b77a5c561934e089/System.Runtime.Remoting.dll
----------------------------------------
 
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
 
For example:
 
<configuration>
<system.windows.forms jitDebugging="true" />
</configuration>
 
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
My System SpecsSystem Spec
22 Apr 2013   #152
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Hi there!

Run the options in tools one by one and see if it works. Tell me which one is failing.
My System SpecsSystem Spec
27 Apr 2013   #153
technotron

win 7 home 64, win vista 32, win xp pro 32, win 8 pro 64
 
 

Just wanted to report a bug.
My primary partition is in the c:\ drive. I ran the SF diagnostic tool from G:\doc\sftool.exe.
I tried looking on my desktop for the folder, but couldn't find it.
Then I realized it said it created a folder in the g:\...\myusername\desktop directory, which is actually in a different partition than my windows c:\ partition.
My System SpecsSystem Spec
.

28 Apr 2013   #154
Ztruker

Windows 10 Pro X64
 
 

I'll 2nd that bug. I just ran it and it put it in:

E:\Users\<myaccount>\Desktop\SF_28-04-2013

should have been

C:\Users\<myaccount>\Desktop\SF_28-04-2013

Might have been tough to find if I didn't have Everything installed. Note that the folder did not exist until I ran SF_Diagnostic_Tool.exe.
My System SpecsSystem Spec
28 Apr 2013   #155
chs4326

Windows 7 Professional 32 bit
 
 

Hi!

I can not use this program, I keep getting "Error code 0x800700oE" i.e. Not enough storage is available to complete this operation.

Tried both with virtual memory set to automatic and 6000 MB. And tried compability mode, am on Win 8 x64.

Any ideas?
My System SpecsSystem Spec
30 Apr 2013   #156
Ztruker

Windows 10 Pro X64
 
 

That's very strange. Check the MD5 checksum. It should be: 141550ba421755c1deac7541ef39a915
If not then the download is corrupted.
My System SpecsSystem Spec
30 Apr 2013   #157
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Updated the OP with FAQ
My System SpecsSystem Spec
06 May 2013   #158
chs4326

Windows 7 Professional 32 bit
 
 

Quote   Quote: Originally Posted by Ztruker View Post
That's very strange. Check the MD5 checksum. It should be: 141550ba421755c1deac7541ef39a915
If not then the download is corrupted.
I can confirm that the checksum is: 141550ba421755c1deac7541ef39a915

I can not think of anyway to make this program work on my computer. A bit wierd yeah.
My System SpecsSystem Spec
06 May 2013   #159
dlrubin

Vindows 7 Enterprise
 
 
SF_Diagnostic_Tool not saving log

I've downloaded SF_Diagnostic_Tool.exe to my windows 7 machine and run it as administrator. I get the series of "ok" dialog boxes and a final one saying the logs were saved to my desktop. However, I don't see any zip file on my desktop. I'm running windows 7 as a parallels vm which shares desktop with the host machine (a mac), but even searching through c:\users\xxx\Desktop I don't see the log file there..
Suggestions?
My System SpecsSystem Spec
Reply

 SF Diagnostic Tool - Using for Troubleshooting




Thread Tools




Similar help and support threads
Thread Forum
SF Diagnostic Tool
Good Evening Folks: As per the instructions contained in the SF Diagnostic Tool, please find attached the results of the scan. Please note the Minidump scan reported that there was no file. Regards Powell Lucas
BSOD Help and Support
Is there a Mouse Diagnostic tool?
I have a Logitech MX300 with wireless 3 button mouse. The left, right and scroll wheel work fine, the center button doesn't seem to work at all. I have the latest version of SetPoint and tried setting it up with different key mappings but to no avail. I'm not even sure if it's working. Is...
Hardware & Devices
WMI Diagnostic Tool for 64-Bit
When I execute version 2.0 of the Microsoft's WMI Diagnostic Tool on my 64-bit Home Premium system, I get an 'Unsupported OS version or build #' error. Am I doing something wrong? If the tool doesn't work on 64-bit, is there a similar tool available which will? Thanks!
Software
memory diagnostic tool
does win 7's memory diagnostic tool always takes a long time from 21% to 22% on extended run? standard, short tests finish quickly i can run 2/3 tests in no time at all
Performance & Maintenance
SF Diagnostic Tool
SF Diagnostic Tool is to collect the information required to Analysis Blue Screen of Death and other troubleshooting purpose. Tool has been replaced with the GUI version https://www.sevenforums.com/tutorials/92394-using-sf-diagnostic-tool-troubleshooting.html Hope this helps, Captain
Crash and lockup debug 'How To'


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 17:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App