Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SF Diagnostic Tool - Using for Troubleshooting

16 Jan 2014   #220
slade1style

windows 7 home premium 64 bit
 
 
I don't think so!

Quote   Quote: Originally Posted by Brink View Post
Did you stop the test by mistake?

The Samsung bit is just the name of the manufacturer of the RAM.
I guess it us still running up in the top right hand box it says pass 48% test 63% test #9 random number sequence testing 4096m- 6144m 2048m of 8136m pattern random#s that keep changing time : 3:06:07 so I guess it is still running it just is weird to me that it says pass 0 errors , press ESC to exit so I have been at the memtest86+ main forum trying to find out more and have but it is hard to read and completely comprehend don't know what to do just worried about it running it in to the ground more than it already is so I guess that it oh and sorry about posting those pics I no other way of doing as I'm posting to the site through my phone so what now?s


My System SpecsSystem Spec
.
16 Jan 2014   #221
Brink

64-bit Windows 10 Pro
 
 

Go ahead and create a new thread for whatever the issue is for why you are running these tests to see if we may be able to further help with it.
My System SpecsSystem Spec
07 Feb 2014   #222
Mohamed raouf

windows 7 ultimate 32 bit
 
 
SD reply

please check the attached file


Attached Files
File Type: bat SF_Debug_Tool v1.1.bat (2.7 KB, 189 views)
My System SpecsSystem Spec
07 Feb 2014   #223
z3r010

 

You need to follow the instructions and post the files it creates in a new thread in the bsod section.

Just follow all the instructions here - Blue Screen of Death (BSOD) Posting Instructions

And DO NOT post them back in this tutorial
My System SpecsSystem Spec
.

17 Feb 2014   #224
dannyk90

Windows 10 Pro
 
 

Once pressing GRAB ALL and it starts running, it stops at each one with an OKAY message box to continue. This message box is stuck behind the main UI. Therefore the only way to proceed is to close that menu, hovering over the sf tool and closing the 2nd instance.

Really this message should not come up to say it has completed each category, it's useless.
My System SpecsSystem Spec
28 Feb 2014   #225
Capt.Jack Sparrow

Windows 7 Ultimate - 64-bit | Windows 8 Pro - 64-bit
 
 

Quote   Quote: Originally Posted by dannyk90 View Post
Once pressing GRAB ALL and it starts running, it stops at each one with an OKAY message box to continue. This message box is stuck behind the main UI. Therefore the only way to proceed is to close that menu, hovering over the sf tool and closing the 2nd instance.

Really this message should not come up to say it has completed each category, it's useless.
Thanks for feedback. I'll look into it.
My System SpecsSystem Spec
28 Feb 2014   #226
dannyk90

Windows 10 Pro
 
 

Quote   Quote: Originally Posted by Capt.Jack Sparrow View Post

Thanks for feedback. I'll look into it.
Welcome
My System SpecsSystem Spec
26 May 2014   #227
beardrinksbeer

Windows 7 x64 Ultimate
 
 

Cooee Captain, cool app

b4 clicking 'grad all', I just moved the app to 1 side so I can get to the 'OK' button underneath, easy

I first ran it from D drive & it made a desktop folder on that drive, I now run it from C drive, easier to find the results folder

cheers
My System SpecsSystem Spec
Reply

 SF Diagnostic Tool - Using for Troubleshooting




Thread Tools




Similar help and support threads
Thread Forum
SF Diagnostic Tool
Good Evening Folks: As per the instructions contained in the SF Diagnostic Tool, please find attached the results of the scan. Please note the Minidump scan reported that there was no file. Regards Powell Lucas
BSOD Help and Support
Is there a Mouse Diagnostic tool?
I have a Logitech MX300 with wireless 3 button mouse. The left, right and scroll wheel work fine, the center button doesn't seem to work at all. I have the latest version of SetPoint and tried setting it up with different key mappings but to no avail. I'm not even sure if it's working. Is...
Hardware & Devices
WMI Diagnostic Tool for 64-Bit
When I execute version 2.0 of the Microsoft's WMI Diagnostic Tool on my 64-bit Home Premium system, I get an 'Unsupported OS version or build #' error. Am I doing something wrong? If the tool doesn't work on 64-bit, is there a similar tool available which will? Thanks!
Software
memory diagnostic tool
does win 7's memory diagnostic tool always takes a long time from 21% to 22% on extended run? standard, short tests finish quickly i can run 2/3 tests in no time at all
Performance & Maintenance
SF Diagnostic Tool
SF Diagnostic Tool is to collect the information required to Analysis Blue Screen of Death and other troubleshooting purpose. Tool has been replaced with the GUI version https://www.sevenforums.com/tutorials/92394-using-sf-diagnostic-tool-troubleshooting.html Hope this helps, Captain
Crash and lockup debug 'How To'


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 15:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App