Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: VWXP settings?

11 Aug 2009   #1
HammerHead

win 7 X64 Ultimate SP1
 
 
VWXP settings?

Maybe someone can straighten me out. I had a printer that didn't work with Win 7. I loaded win6.1-KB958559-X64.msu and VirtualWindowsXP.msi. After some difficulty it seems the load is correct. I then loaded the software for Lexmark 4800 series all in one. The software package faulted on numerous installs but the drivers got installed. No big thing I don't need the pokey bait software interface. The scanner, the printer, the card readers work in VDXP. When I release them and go to Win 7 the scanner and card reader are still functioning but the printer stops printing. You can send a document to print and it enters the Que but it ends there. I probably have something set wrong. But I have run out of ideas. Meanwhile there is a doc stuck in the que that I can't get deleted.
Win 7 RTM


My System SpecsSystem Spec
.
17 Aug 2009   #2
Night Hawk

W7 Ultimate x64/W10 Pro x64 dual boot main build-remote pc W10 Pro x64 Insider Preview/W7 Pro x64
 
 

While you are in the XP mode hopefully the RC not beta version of that you can still right click on the XPS icon seen in the control panel and cancel all documents. Surprizingly while the image here is from 7 the exact same small popup window appears when right clicking on the Microsoft XPS printer icon to see what's printing.


Attached Thumbnails
VWXP settings?-cancel-documents.jpg  
My System SpecsSystem Spec
Reply

 VWXP settings?




Thread Tools




Similar help and support threads
Thread Forum
Cannot see Multimedia Settings under "Change advanced power settings"
I have already clicked "Change settings that are currently available" but it still does not show it, restarted the PC and still same result. MSE disabled Windows 7 Starter 32-bit Power Plan: High Performance System Model: HP Mini 110-3500
General Discussion
mem settings
Hi all well after huge help from essenbe and Bigmck and others that helped me set up my ssd drive i now want to check as i followed a youtube video to overclock my Q660 is now puring from 2.4 to 3.2 .Just a question please on the ram in the cpuz program i see my ram as per screen shot .just...
PC Custom Builds and Overclocking
Windows 7 Regional Settings and Office 2010 Language Settings
I need to know if the Windows 7 Regional settings has any affect on Office 2010 language settings. If so, how? Heather
Microsoft Office
NFS Run, settings for me?
Guys what settings ("advanced grahics settings") should I play NFS Run? My specs are in their usual place in detail. Thanks in advance :party:
Gaming
Ram settings
Hi Dave, Here are some CPU-Z snips with the FSB at 300, command Rate 2T. With the FSB and 310 the RAM freq was ~1648. DRAM V = 1.64V NB V = 1.44V CPU NV VID = 1.35V CPU V = 1.525V RAM specs are identical other than the tRC and size. Slots are populated as follows: S1-2GB
PC Custom Builds and Overclocking


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 11:56.
Twitter Facebook Google+