Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: [what]Update for Windows 7 for x64-based Systems (KB976902)

11 Jan 2011   #41
Phone Man

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

Quote   Quote: Originally Posted by NYKO View Post
Today it came thru my official updates on my Windows7 x86, but shows unmarked, so I consider it's an optional update not realy neded. I always hide this kind of unmarked updates, to never recive notification. Hoever may be I'm rong and this kind of updates are need it.
The reason some updates are unchecked is because they may conflict with other updates being installed at the same time. I always installed those alone.

Jim


My System SpecsSystem Spec
.
11 Jan 2011   #42
NYKO

Windows 7 Ultimate x32
 
 

The reason some updates are unchecked is because they may conflict with other updates being installed at the same time. I always installed those alone.

Jim [/QUOTE]

Does this meen I'm not gooing to recive servicepack1, becouse I don't uninstall my updates, and I don't use beta or rc service packs, soo is there any need to install this.
My System SpecsSystem Spec
11 Jan 2011   #43
Phone Man

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

Quote   Quote: Originally Posted by NYKO View Post
The reason some updates are unchecked is because they may conflict with other updates being installed at the same time. I always installed those alone.

Jim
Does this meen I'm not gooing to recive servicepack1, becouse I don't uninstall my updates, and I don't use beta or rc service packs, soo is there any need to install this.[/QUOTE]


According to the KB article, YES you need it for service packs.

See my post#40

Jim
My System SpecsSystem Spec
.

12 Jan 2011   #44
NoN

Windows 7 Professional SP1 - x64 [Non-UEFI Boot]
 
 

I've installed & checked first the kb976902 (also installed on the Oct 27, 2010) before checking boxes the others update. Didn't need to reboot (not asked to but did it), then installed kb2454826 & kb2451910, rebooted then applyed the kb890830.

Ms Source:
kb976902

So far since october everything is fine, and my balls are great!

I don't mind being spyed, i'm on legit system...thus this one is for SP1 future install, that's from what i readed before applying this Windows Update kb976902...just a matter of reading what MS tells, no?.

I'm spyed for my good...
My System SpecsSystem Spec
12 Jan 2011   #45
fireberd

Windows 10 64 bit
 
 

I don't know if it was this specific update or one of the others, but after the Tuesday updates I now have a delayed Windows 7 start when booting. When I boot up and after the BIOS screen, Windows 7 would stat to load immediately. Now, I get a flashing cursor and blank screen for about 30 seconds before Windows starts to load.

I tried System Restore and it could not complete.
My System SpecsSystem Spec
12 Jan 2011   #46
wds7

WDS 7 Home Pre.x64
 
 

Quote   Quote: Originally Posted by fireberd View Post
I don't know if it was this specific update or one of the others, but after the Tuesday updates I now have a delayed Windows 7 start when booting. When I boot up and after the BIOS screen, Windows 7 would stat to load immediately. Now, I get a flashing cursor and blank screen for about 30 seconds before Windows starts to load.

I tried System Restore and it could not complete.

Have you tried to uninstall them ...one by one in wds update ...?

Ha ..i just installed them this morning ...reboot 3 times to see if anything change ..?
so far ...nothing ..changes ...mine is 32Bit wds though ..if that matters ..
[what]Update for Windows 7 for x64-based Systems (KB976902)-1-12-2011-2-39-01-pm.jpg


My System SpecsSystem Spec
12 Jan 2011   #47
Phone Man

Windows 8.1 Pro w/Media Center 64bit, Windows 7 HP 64bit
 
 

Quote   Quote: Originally Posted by NoN View Post
I've installed & checked first the kb976902 (also installed on the Oct 27, 2010) before checking boxes the others update. Didn't need to reboot, then installed kb2454826 & kb2451910, rebooted then applyed the kb890830.

Ms Source:
kb976902

So far since october everything is fine, and my balls are great!

I don't mind being spyed, i'm on legit system...thus this one is for SP1 future install, that's from what i readed before applying this Windows Update kb976902...just a matter of reading what MS tells, no?.

I'm spyed for my good...
I think the paranoid users over reacted when MS released that update in October but did not release the KB article. In their paranoid mines they thought MS was pulling a sneak attack, when in fact is was a simple mistake of not publishing the KB article in a timely manner. The update was pulled and has now been released along with the article.
SP1 should be out soon and this update is needed to install SP1.

Jim
My System SpecsSystem Spec
12 Jan 2011   #48
TVeblen

Microsoft Community Contributor Award Recipient

Windows 7 64 Bit Home Premium SP1
 
 

Quote   Quote: Originally Posted by fireberd View Post
I don't know if it was this specific update or one of the others, but after the Tuesday updates I now have a delayed Windows 7 start when booting. When I boot up and after the BIOS screen, Windows 7 would stat to load immediately. Now, I get a flashing cursor and blank screen for about 30 seconds before Windows starts to load.

I tried System Restore and it could not complete.
Hey Fireberd - Sorry to hear about that.

Sometimes when the System Restore will not complete when run from within Windows you can use the F8 at boot to get the Windows Boot Menu, and then choose "Last Good Configuration" to restore.

Hope that helps.
My System SpecsSystem Spec
14 Jan 2011   #49
Zardoc

Windows 7 x64 Ultimate SP1
 
 

Here is my 2 cents.

update 12 Jan

My System SpecsSystem Spec
14 Jan 2011   #50
NYKO

Windows 7 Ultimate x32
 
 

Hey did any one recived SP1, becouse I alredy seen the RTM out on a site. It look's like this & I think it's the real deal:
Microsoft Windows 7 SP1 (RTM) x86
Build: 7601.17514.101119-1850
File: windows6.1-KB976932-x86.exe
Size: 563,934,504 byte
SHA-1: C3516BC5C9E69FEE6D9AC4F981F5B95977A8A2FA
MD5: 4BF28FC00D86C936C89E2D91EF46758B
CRC: 5EB0FA87
Wave1: Arabic, Bulgarian, Chinese-Hong Kong SAR, Chinese-Simplified,
Chinese-Taiwan, Croatian, Czech, Danish, Dutch, English, Estonian, Finnish,
French, German, Greek, Hebrew, Hungarian, Italian, Japanese, Korean,
Latvian, Lithuanian, Norwegian, Polish, Portuguese-Brazil, Portuguese-Portugal,
Romanian, Russian, Serbian, Slovak, Slovenian, Spanish, Swedish, Thai,
Turkish, and Ukrainian.

Microsoft Windows 7 SP1 (RTM) x64
Build: 7601.17514.101119-1850
File: windows6.1-KB976932-x64.exe
Size: 947,070,088 byte
SHA-1: 74865EF2562006E51D7F9333B4A8D45B7A749DAB
MD5: 28D3932F714BF71D78E75D36AA2E0FB8
CRC: 068C79C6
Wave1: Arabic, Bulgarian, Chinese-Hong Kong SAR, Chinese-Simplified,
Chinese-Taiwan, Croatian, Czech, Danish, Dutch, English, Estonian,
Finnish, French, German, Greek, Hebrew, Hungarian, Italian, Japanese,
Korean, Latvian, Lithuanian, Norwegian, Polish, Portuguese-Brazil,
Portuguese-Portugal, Romanian, Russian, Serbian, Slovak, Slovenian,
Spanish, Swedish, Thai, Turkish, and Ukrainian.

My System SpecsSystem Spec
Reply

 [what]Update for Windows 7 for x64-based Systems (KB976902)




Thread Tools




Similar help and support threads
Thread Forum
Security Update for Windows 7 for x64-based Systems (KB3011780)
Security Update for Windows 7 for x64-based Systems (KB3011780) Hey folks. I seem to be continuously being asked to install the above numerous times a day, Every day Any thoughts please?
Windows Updates & Activation
security update for windows 7 for x64-based systems failed
i keep getting these results when im trying to update windows. ive tried using the clean boot and i have the same problem. Ive deleted all the folders from SoftwareDistribution and then tried the update again and it doesnt work. can you plz help fix this issue.
Windows Updates & Activation
Windows 7 Service Pack 1 for x64-based Systems update error
Hello everyone. would anyone be able to help me with my problem, im trying to update the windows 7 service pack 7 but keep getting an error 800B0100 tried installing it from the windows website but does not work ether. Thanks
Windows Updates & Activation
Security Update for Windows 7 for x64-based Systems (KB2845187)
At every shutdown this security update (Security Update for Windows 7 for x64-based Systems (KB2845187) tries to install however the update log shows repeated failed attempts. Not finding too much help on the net regarding this, so Iím hoping someone out there can help. Win 7 64 bit Professional....
Windows Updates & Activation
Update for Windows 7 for x64-based Systems (KB2446496)
This one is pretty odd aswell...didn't heard about it in Windows Update, until today while browsing Ms site. Update for Windows 7 for x64-based Systems (KB2446496): Download details: Update for Windows 7 for x64-based Systems (KB2446496) validation required....rated "Important". It...
Windows Updates & Activation
System Update Readiness Tool for Windows 7 for x64-x32-based Systems
System Update Readiness Tool for Windows 7 for x64 & x32-based Systems (KB947821) : Brief Description This tool is being offered because an inconsistency was found in the Windows servicing store which may prevent the successful installation of future updates, service packs, and software. ...
News


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 09:40.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App