Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Cant install SP1 RC win7

21 Jan 2011   #31
niemiro

Vista Home Premium x86 SP2
 
 

Quote:
ok i found the problem Driver Sweep have taken out 2 files from the C:\Windows\System32\DriverStore\FileRepository


atiilhag.inf_amd64_neutral_951c1812f542740a

atiilhag.inf_amd64_neutral_951c1812f542740a.dbs
and now i cant place them back in as i get destination folder access denied
Hello!

If you provide me with the logs, I will do my best to help you.

Thanks!

Richard


My System SpecsSystem Spec
.
21 Jan 2011   #32
Kuss

Windows 7 7601 x64
 
 

its ok now iv fixed it and now i can install SP1 well i hope so lol

I had to take permission of C:\Windows\System32\DriverStore\FileRepository and place the files there and its worked

if needed the tut for doing so

http://www.vistax64.com/tutorials/67...ship-file.html
My System SpecsSystem Spec
22 Jan 2011   #33
niemiro

Vista Home Premium x86 SP2
 
 

Hello!

That is good news, but there was a reason why I didn't just send you that tutorial. Winsxs and Stores are VERY picky about permissions. At the very least, you should be setting back Trusted Installer, however, my worry is that now permissions, versioning, and corruption issues, plus whatever else Driver Sweeper has done. I would so strongly recommend that you perform a System Restore, and just re-do these last few actions the correct way, so that you don't run into Clean-Install type issues over the coming months. Before it gets too late, now is your only, only chance. Please?

System Restore

I would also not recommend Driver Sweeper, as you have now seen first hand the mess it has got your system into.

Thanks!

Richard
My System SpecsSystem Spec
.

22 Jan 2011   #34
Johnathan Lyman

Windows 7 Ultimate 64-bit
 
 

Quote   Quote: Originally Posted by niemiro View Post
Hello!

That is good news, but there was a reason why I didn't just send you that tutorial. Winsxs and Stores are VERY picky about permissions. At the very least, you should be setting back Trusted Installer, however, my worry is that now permissions, versioning, and corruption issues, plus whatever else Driver Sweeper has done. I would so strongly recommend that you perform a System Restore, and just re-do these last few actions the correct way, so that you don't run into Clean-Install type issues over the coming months. Before it gets too late, now is your only, only chance. Please?

System Restore

I would also not recommend Driver Sweeper, as you have now seen first hand the mess it has got your system into.

Thanks!

Richard
I second that. I've (tried) to follow as much as I can and see if I can provide my two cents.

I am going to be blunt, because that's what I do. Hate me if you wish. I'll sleep just fine, tonight.

I see so much crap about to hit the fan. First, we still haven't confirmed that you are running a completed version of Windows 7. That in itself is a huge issue when it comes to Windows Updates or ANYTHING that Microsoft releases to the public for Windows.

Second, you're going WAY outside the scope of ANY fix that would take place to install Service Pack 1. If SP1 does not want to install for WHATEVER reason, you better believe it has a damn good reason. If you get errors, there's a reason for it. the SP1 installer is smart enough to know if it has permission to do what it has to do.

Third, changing permissions for a folder is one thing... but A core system folder is like swimming in a shark tank while bleeding from the neck. It will cause problems down the road, I will bet you loads of cash in any currency you want.

I 100% back up Richard (Niemiro) when he says to seriously just wipe it and start over... doing it the right way. Richard knows what the hell he's talking about. I PROMISE you will have more problems in the future.

Thanks!
My System SpecsSystem Spec
22 Jan 2011   #35
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

Kuss,

We are here to help those with legitimate copies of Windows 7.

Please install a legitimate copy of Windows 7.

Karl
My System SpecsSystem Spec
23 Jan 2011   #36
nWo

Windows 7 32 bit
 
 

question, where can one download the service pack 1 for windows 7 32-bit...
My System SpecsSystem Spec
23 Jan 2011   #37
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

Quote   Quote: Originally Posted by nWo View Post
question, where can one download the service pack 1 for windows 7 32-bit...
From Microsoft, as soon as they release it.
My System SpecsSystem Spec
23 Jan 2011   #38
nWo

Windows 7 32 bit
 
 

thanks dude! i guess we wait
My System SpecsSystem Spec
25 Jan 2011   #39
Kuss

Windows 7 7601 x64
 
 

Quote   Quote: Originally Posted by karlsnooks View Post
Kuss,

We are here to help those with copies of Windows 7.

Please install a legitimate copy of Windows 7.

Karl
it is a legitimate copy the computer was built in a computer shop to my specs and i addded 146 on top for software, permissions are back to normal to but i dont like SP1 because my Z Engine dont work
My System SpecsSystem Spec
25 Jan 2011   #40
karlsnooks

MS Windows 7 Ultimate SP1 64-bit
 
 

WIN | Pause/Break key | Enter

In the bottom right-hand side of the screen do you see this?

Cant install SP1 RC win7-genuine-microsoft.png


My System SpecsSystem Spec
Reply

 Cant install SP1 RC win7




Thread Tools




Similar help and support threads
Thread Forum
clone multiboot two disc win7 xp install to win7 ssd plus disk XPx64
I have a multiboot win7 /xpx64 TWO DISK system, showing win7 as the C; drive and XPx64 as D: when examining via My Computer. Cloned the C: drive (win7) using Samsung tool to same size Samsung evo SSD. When put in computer the dual boot option gone. The SSD clone of win7 runs ok, but with that in...
Installation & Setup
Wpeinit during Win7 install & Cancel pending installation of Win7
I am trying to install 64 bit Windows 7 in order to repair windows installer, which gave me lot of problems that i couldn't solve. So i tried an upgrade installation (as suggested in another forum) with the original cd. (Win 7 was already installed on the pc, in this way i only tryed to repair the...
Installation & Setup
Create Win7 installation on new disc and remove old Win7 install
Scenario is I have a new sata3 SSD drive on which I want to install Win7. The PC has an existing build of Win7 on a different disc which i want to reformat & use for data. I tried this previously and ended up with a dual booting system. Trying to remove the old Win7 installation and format that...
General Discussion
A fresh win7 install over a win7/vista dual boot system ?
Hello all, I have a vaio laptop with a dual boot win7/vista setup. I simply want to format the whole drive back to one large c:\drive, then reinstall windows 7. I have heard horror stories of people saying their boot manager becomes corrupted. or goes missing. I enclose a snapshot of my hard...
Installation & Setup
Win7 (32bit) to Win7 (64bit) upgrade install error
Hello I have purchased and downloaded both 32 bit and 64 bit Windows7 Professional (no CDs or media here only download version) I sucessfully upgraded from Vista 32 to Win7 32 Then I upgraded my hard disk (140Gb 500GB) and RAM (3GB to to 4GB) Now I would like to go from Win7 32bit...
Installation & Setup
Upgrade (not clean install) from Win7 7264 to Win7 RTM?
Hey, I currently have Windows 7 Build 7264 64-bit, and I have a lot of apps installed. I don't want to lose them, so I want to upgrade. Can I do this with my specs? (64 bit, 7264) Upgrade to 7600 RTM. If I can't, how can I keep my apps through a clean install?
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:44.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App