Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Give up on installing Win 7 Sp1 ?

26 Feb 2011   #11
jakedog

Win 7 64 bit Premiun
 
 

Tried installing KB2345886 as a standalone download and tried and ran the download from the site,to no avail. Did notice that when I RAN it from the site it configured all the way to 91% usually it only configures to 75%. Don't know if that means anything. Drat!!!!


My System SpecsSystem Spec
.
26 Feb 2011   #12
Corrine

Windows 7 & Windows Vista Ultimate
 
 

Hi, jakedog.

I thing we're back to, as profdlt suggested, your use of Drive Cleaner.

As Andre.Ziegler said in Windows 7 SP1 fails with Code 800F0A13 - Says system components are missing (even referencing the tutorial here at Seven Forums :) ):
Quote:
check this link:

Windows 7 Service Pack 1 (Page 1) / Driver Sweeper / Phyxion.net Forums
otherwise also do the InPlace upgrade.
the link from sevenforums shows you with pictures how to do it.

Next time, DON'T USE THIS CRAPPY driver cleaner.

{Bold added}
When the person he was helping responded with:
Quote:
"This is only for ATI - Display, other drivers are not affected! If you haven't used Driver Sweeper to clean ATi - Display drivers and you are having this problem with SP1 the problem with your system is something else"
Since I don't have ATI, (I have never had ATI on this computer, only NVidia).... does that mean I should do the InPlace upgrade?
Andre instructed:

Quote:
copy the files from the topic to the WinSxS folder. The drivers are aprt of Windows, so it doesn't matter which card you have. If the drivers are missing, Sp1 fails.
Also note from that topic Froztbound's post regarding extracting drivers from the original Windows 7 DVD and using the tutorial here for how to do it.

I think you need to either replace the drivers or do a repair install.
My System SpecsSystem Spec
26 Feb 2011   #13
lackoo

Windows 7 Ultimate X64
 
 

I tried to install the SP1 update on a fresh system about 6 times today . Failed every time .
My System SpecsSystem Spec
.

26 Feb 2011   #14
jakedog

Win 7 64 bit Premiun
 
 

I used Driver Cleaner Pro not Driver sweeper. Should I still try what Andre said.?

Also I didn't have error 800F0A13,I have 80004005 and 800f0826.
My System SpecsSystem Spec
26 Feb 2011   #15
Corrine

Windows 7 & Windows Vista Ultimate
 
 

Hi, jakedog.

Note from the topic I linked to at TechNet:
Quote:
2011-02-23 12:26:35, Info CBS SPI: No drivers found to warn
2011-02-23 12:26:35, Error CBS SPI: Driver directory C:\Windows\System32\DriverStore\FileRepository\atiilhag.inf_amd64_neutral_951c1812f542740a is missing
2011-02-23 12:26:35, Error CBS SPI: (CSPInstall::CompatibilityApplicabilityScan:1468)Inbox Driver check failed hr=0x800f0a13
Go to "C:\Windows\Logs\CBS\" and copy those files to your documents folder so you can access them. Open the CBS.log with Notepad. If you have similar entries, you will need to replace the files as documented in that topic or in this blog post, Windows 7 Service Pack 1 fails to install with 0x800f0a13 or 0x800f0826 - The Servicing Guy - Site Home - TechNet Blogs.

In the same thread, Frotzbound was successful, following the steps below:

Quote:
You find the procedure at: https://www.sevenforums.com/tutorials/42776-extract-files-windows-7-installation-dvd.html

Extract and replace the %SystemRoot%\System32\DriverStore\FileRepository with the following folders:

atiilhag.inf_amd64_*
atiriol6.inf_amd64_*
nv_lh.inf_amd64_*


Extract and replace the %SystemRoot%\winsxs with the following folders (x64):

amd64_atiilhag.inf.resources_*
amd64_atiilhag.inf_*
amd64_atiriol6.inf_*
amd64_nv_lh.inf.resources_*
amd64_nv_lh.inf_*


Extract and replace %SystemRoot%\winsxs\Manifests with the following files:

amd64_atiilhag.inf-languagepack_*.manifest
amd64_atiilhag.inf.resources_*.manifest
amd64_atiilhag.inf_*.manifest
amd64_atiriol6.inf_*.manifest
amd64_nv_lh.inf-languagepack_*.manifest
amd64_nv_lh.inf.resources_*.manifest
amd64_nv_lh.inf_*.manifest


Note: these are the 64-bit version of the files. For the 32-bit version look for the x86 files. You also need to replace the permisions on above mentioned files and folders to be able to replace them. A procedure to accomplish this is here: Fix “You need permission to perform this action” error

After replacing the folders and files, reboot your computer. Then start the cmd-prompt as administrator and do a sfc /scannow to verify that everything copied correctly and verifies 100%.

{SNIP}

After applying the System Update Readiness Tool, the SP1 installed successfully. Seems the tool (Windows6.1-KB947821-v10-x64.msu) did the trick. I downloaded the SP1 (windows6.1-KB976932-X64.exe) and ran it. This time the SP1 installed itself and ran without any problems whatsoever.


My suggestions to fix the error Code 800F0A13 is the following:

Extract and replace the above mentioned files and folders. Reboot. Download and run the System Update Readiness Tool to fix any remnant errors and do another reboot. Then either download the SP1 and apply it manually or try the Windows Update.

My System SpecsSystem Spec
26 Feb 2011   #16
jakedog

Win 7 64 bit Premiun
 
 
my CBS log

Corrine,could you look at this log cause I do not understand it.
My System SpecsSystem Spec
26 Feb 2011   #17
profdlp

Main - Windows 7 Pro SP1 64-Bit; 2nd - Windows Server 2008 R2
 
 

jakedog, look how many times the files she listed in the post just before yours pop up. Check the procedure she posted, follow it carefully, and you should be alright. :)

You also might want to edit your post and just attach the log as a text file - that's a lot of scrolling!
My System SpecsSystem Spec
27 Feb 2011   #18
wysiwyg

Vista Ultimate 32 bit, Win 7 Pro 32 bit, Win 7 Pro 64 bit
 
 

Re- install is the only way, bite the bullet.

Re-install repair is wasting your time.
My System SpecsSystem Spec
27 Feb 2011   #19
slurp812

windows seven
 
 

Quote   Quote: Originally Posted by wysiwyg View Post
Re- install is the only way, bite the bullet.

Re-install repair is wasting your time.
IDK about that. It sounds like its jacked by some type of malware. Iv cleaned a laptop with win7 while back, and it was a not allowing any updates. Before you f-disk it try combofix from here.

A guide and tutorial on using ComboFix
My System SpecsSystem Spec
27 Feb 2011   #20
gunneradt

windows 7 64 bit
 
 

Quote   Quote: Originally Posted by lackoo View Post
I tried to install the SP1 update on a fresh system about 6 times today . Failed every time .

i think there are inherent clashes with drivers. Ive actually managed to get the service pack to install on the one machine it was failing on but it breaks it completely - no shortcuts or programs work - this cant be right - there's got to be something seriously wrong for it to do that
My System SpecsSystem Spec
Reply

 Give up on installing Win 7 Sp1 ?




Thread Tools




Similar help and support threads
Thread Forum
I Give Up
Okay guys, (and maybe gals).Thanks for the help, but I've thrown in the towel. I've tried a hundred different options, hours upon end, remedies, fixes, you name it, and I still CANNOT get rid of the 'read only' attribute that appears in any file that I move to my desktop, or have created from my...
General Discussion
Want To Give Rep
I wanted to give rep to 2 members, today, they both had Pro badges and I was not in the chillout room. I was in the General Section of the forum. My question, why was the rep scale, not shown, which would have allowed me to give rep?
Chillout Room
Cant give rep ?
A few mins ago Ken & Jeff answered my question (thanks guys very helpful) i tried to give each rep but find i cant type a comment :confused: > http://i479.photobucket.com/albums/rr152/Cat-tranz/Anything/140cfc6f.jpg
General Discussion


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 23:16.
Twitter Facebook Google+