Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: SP1 Fails to install with the following CBS errors

15 Mar 2011   #11
niemiro

Vista Home Premium x86 SP2
 
 

Hello!

Well done, but there is a bit of an issue. Repairing the corruptions is the fix, but the method is wrong. You are also lucky that the corruptions were that easy.

However, I bet that you changed the permissions and ownerships to perform this fix. This is really, really dire. Vista and 7 rely on permissions. Every single one of yours systems is now a timebomb, waiting for catastrophic failure when the next range of hefty updates comes along. I try to stress this to people all the time, but people never beleive me.

I would strongly recommend performing a System Restore now, and I can fix it properly. To prevent damage, the System Update Readiness Tool has built in curative ability for these corruptions. I would have used these safe methods.

For bigger corruptions, there are other methods.

For everyone: Please seek advice, and stick with me, rather than trying to manually fix it yourself.

It is your computer. I cannot force you. I can only encurage. If you want, I can try to help you fix permissions and ownership, but missing one can be unfixable down the road.

Richard


My System SpecsSystem Spec
.
15 Mar 2011   #12
Evil Turnip

Windows 7 Professional
 
 

The permissions are back to how they were along with the ownership ... Im a MCTS and yes its a nasty fix and system restore didnt actually fix this problem. The update rediness tool didnt fix it either.
I wouldnt say each machine is a timebomb either...if you put it back to how it was you will be fine...just got to remember what you did.

All other updates have gone on fine without any issues.

I have a few more machines to do so..if you have another way then please share...and I will try your way and see what happens

Thansk
ET
My System SpecsSystem Spec
25 Mar 2011   #13
hussy0punter

Windows Ultimate 32bit
 
 
Hello!!!

I have the same problem.My log is given below.Pls help,I don't have another good installation pc,Thanx in advance. ================================= Checking System Update Readiness. Binary Version 6.1.7601.21645 Package Version 11.0 2011-03-20 12:43 Checking Windows Servicing Packages Checking Package Manifests and Catalogs (f) CBS MUM Corrupt 0x00000000 servicing\Packages\Package_for_KB2443685_RTM~31bf3856ad364e35~x86~~6.1.1.0.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~x86~~6.1.7600.16385.mum does not match the actual file name Checking Package Watchlist Checking Component Watchlist Checking Packages Checking Component Store Summary: Seconds executed: 824 Found 1 errors CBS MUM Corrupt Total count: 1 Unavailable repair files: servicing\packages\Package_for_KB2443685_RTM~31bf3856ad364e35~x86~~6.1.1.0.mum servicing\packages\Package_for_KB2443685_RTM~31bf3856ad364e35~x86~~6.1.1.0.cat
My System SpecsSystem Spec
.

25 Mar 2011   #14
Evil Turnip

Windows 7 Professional
 
 

The other guy never replied back to me...so I am unaware of any other way to fix this issue. The way I do it is risky but seeing as I can re image the machine quickly enough its no problem for me..

Its risky..
My System SpecsSystem Spec
23 Jun 2011   #15
chrisreb

Win 7 starter 32 bit
 
 

My 3 week old Netbook is repeatedly failing to configure SP1 on Win 7 starter edition. It installs and says install sucessful and then has to re start to configure and goes wrong as it reconfigures at startup eventually rolling it back.

The Netbook is only 3 weeks old and I have allowed windows to do all the updates it wanted to get it up to date.

Have tried turning off MS Security essentials - starting a new Software Distribution folder, running System Readiness tools with no sucess.

If I try the system readiness tool and generated a log file as per the posting above would someone be able to look at it to see if something obvious is highlighted in it?
My System SpecsSystem Spec
24 Jun 2011   #16
Irene

Windows 7 Home Premium 64bit
 
 

Hi Chrisreb, welcome to the forum.

Here are some excellent guidelines to follow before downloading the update:
Steps to follow before you install Windows 7 Service Pack 1 from the Microsoft Download Center

Please post back with your results, or if you need any further help.
My System SpecsSystem Spec
24 Jun 2011   #17
niemiro

Vista Home Premium x86 SP2
 
 

Quote   Quote: Originally Posted by chrisreb View Post
My 3 week old Netbook is repeatedly failing to configure SP1 on Win 7 starter edition. It installs and says install sucessful and then has to re start to configure and goes wrong as it reconfigures at startup eventually rolling it back.

The Netbook is only 3 weeks old and I have allowed windows to do all the updates it wanted to get it up to date.

Have tried turning off MS Security essentials - starting a new Software Distribution folder, running System Readiness tools with no sucess.

If I try the system readiness tool and generated a log file as per the posting above would someone be able to look at it to see if something obvious is highlighted in it?
Hello, and welcome to the Seven Forums!

If you could please create a new thread here: Windows Updates & Activation - Windows 7 Forums

follow Irene's excellent advice, and then create a CheckSUR.log using the instructions above, I will be very happy to assist you

Richard
My System SpecsSystem Spec
24 Jun 2011   #18
chrisreb

Win 7 starter 32 bit
 
 

Hi

Thanks for the reply.

Checked that I do not have the problem integrated drivers.
No other driver downloads offered in Update
Did virus scan - all ok
of the 3 KB files I had one, KB2534366 is for 64 bit, howeer did not have KB2533552 Genuine windows so installed that.
Search does not find checksur.exe so could not run that

Will try to install again in case it was the windows genuine thing and report back.

The install usually completes fine. It fails on restart when configuring so hope it might be the lack of genuine windows tool. Should not be anything to do with normal drivers as they have not been started at that point not even having reached the logon screen.
My System SpecsSystem Spec
05 Nov 2012   #19
Brianne163

Win 7 Enterprise 64 Bit
 
 
SP1 update failing CBS MUM Corrupt 0x00000000

Hi
New to Forum and new to W7.
Just got new computer and installed W7 Enterprise x64. 32G RAM i7 CPU Nvidia GTX 650 graphics.
All going well, updates installing fine until it came to SP1 KB976932
Failed
Ran System update checker
Log below.
Checking Package Manifests and Catalogs
(f) CBS MUM Corrupt 0x00000000 servicing\Packages\Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~9.4.8112.16421.mum Expected file name Microsoft-Windows-Foundation-Package~31bf3856ad364e35~amd64~~6.1.7600.16385.mum does not match the actual file name

Checking Package Watchlist

Checking Component Watchlist

Checking Packages

Checking Component Store

Summary:
Seconds executed: 54
Found 1 errors
CBS MUM Corrupt Total count: 1

Unavailable repair files:
servicing\packages\Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~9.4.8112.16421.mum
servicing\packages\Microsoft-Windows-InternetExplorer-Package~31bf3856ad364e35~amd64~~9.4.8112.16421.cat

I have looked at solutions on MS site etc.
Ran takeowner for folder OK Ran cacls c:\Windows\Servicing\Packages /E /T /C /G USERNAME:F
My problem is. Where do I go to get the download for the files to replace the corrupt ones from please.
My System SpecsSystem Spec
05 Nov 2012   #20
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Please start a NEW thread - you're responded to one that effectively died 5 months ago, and are unlikely to get a reasoned answer in it
My System SpecsSystem Spec
Reply

 SP1 Fails to install with the following CBS errors




Thread Tools




Similar help and support threads
Thread Forum
IE11 install fails 9C59, can't unistall IE9 due to errors in SUR log
IE11 install failed with the common 9C59 error. Microsoft suggests this can be because of IE9 still being installed. As directed, I viewed IE9 installed updates and tried to uninstall. There were 11 language pack entries and one for IE9 itself. Managed to uninstall 10 language packs but final...
Windows Updates & Activation
Won't complete boot- no errors, Repair startup fails
Bear with me... trying to help my niece in another state. Her only computer is the problem, so she can't directly search for fixes. She has a Windows 7 Home edition workstation. Her daughter (9) was playing on it when she said it suddenly stopped working. It would reboot, but wouldn't complete...
General Discussion
Windows update fails to install IE10 after repair install
I did a repair install of W7 Ult. x64 SP1. Applied all updates, but if fails to install IE10 update : (as you see it is a dutch version). If have run sure & sfc /scannow. Both report no problems. CBS files are attached. Please help ?
Windows Updates & Activation
BSOD, System Restore Fails Errors inside
My problem started yesterday. I booted up and immediately got the BSOD. I ran startup repair and it could not fix the problem, gave back following: Prob Sig #1 6.1.7600.16385 #2 6.1.7600.16385 #3 unknown #4 21200145 #5 autofailover #6 2 #7 0x124
BSOD Help and Support
Windows 7 Install Disc fails to see hard disk after Ubuntu install
After I tried to make a dual boot with Ubuntu and Windows 7 Ultimate (64-bit), Windows now does not boot. I have tried to reinstall and repair the HDD but the disc fails to recognize my HDD (Western Digital Scorpio Black 500 GB). My HDD is Basic, has 3 primary partitions and 1 extended (3 logical)....
Installation & Setup
Two issues: Upgrade install of W7x86 fails and W7x64 fails to clean install
Clean installing W7 x86 is no problem. But 1) upgrading Vista x86 to W7 x86 fails and automatically rolls back to Vista, and 2) attempt to clean install W7 x64 results in BSOD when rebooting to finalize the process. Any suggestion would be appreciated.
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 22:28.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App