Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows SP1 Update Failure

13 Jul 2011   #1
BonShaw

Windows 7 x64 Professional
 
 
Windows SP1 Update Failure

Hi, I seem to have the same errors installing the SP1 as other, as yet I have not been successful. I ran the system update readiness tool, it ran to completion but failed to fix things well enough. The failed updates error is trust_e_nosignature (0x800b0100). I have attached the CBS.zip file as I pray for help!


My System SpecsSystem Spec
.
13 Jul 2011   #2
BonShaw

Windows 7 x64 Professional
 
 

I have attached the ChuckSUR.zip file.
My System SpecsSystem Spec
13 Jul 2011   #3
niemiro

Vista Home Premium x86 SP2
 
 

Hello, and welcome to the Seven Forums!

That machine has quite a few corrupt files! But hopefully nothing which can't be patched up in a jiffy! Well done on uploading your log files.

WARNING! This fix was created specifically for this user! If you are not this user, do not follow these instructions!
@BonShaw: Ignore the above

Download the attached .zip file. Inside it, will be two folders, Packages and Manifests.

Create these folders if they do not already exist: C:\Windows\Temp\CheckSur\Servicing\Packages\ and C:\Windows\Temp\CheckSur\winsxs\Manifests

Extract Packs.zip onto your Desktop. Please place the contents of my Desktop\Packages in C:\Windows\Temp\CheckSur\Servicing\Packages\ and my Desktop\Manifests in C:\Windows\Temp\CheckSur\winsxs\Manifests.

DO NOT place the .zip file in that folder, or the folders themselves. Make sure that a lot of files are in each of those Checksur folder.

Re-run the System Update Readiness Tool, and get me another copy of C:\Windows\Logs\CBS\CheckSUR.log.

Also, please retest Windows Updates (with fingers slightly crossed, no matter how much we both know that that won't help! lol.)

Thanks a lot, and the very best of luck!

Richard
My System SpecsSystem Spec
.

13 Jul 2011   #4
BonShaw

Windows 7 x64 Professional
 
 

Thank you so much. I've performed all that you requested and have attached the log file. I also attempted to load/run SP1 and received error code 0x800f0818.
My System SpecsSystem Spec
14 Jul 2011   #5
niemiro

Vista Home Premium x86 SP2
 
 

Hello again!

Very well done on following those instructions. You did it perfectly!

Code:
Found 134 errors
Fixed 134 errors
Can you please restart your computer and re-try SP1 once more for me, and if it still fails, please copy the C:\Windows\Logs\CBS folder to your Desktop, right click on it > Send to > Compressed (zipped) folder, and upload the new file which is created on your Desktop here.

Thanks a lot!

Richard
My System SpecsSystem Spec
14 Jul 2011   #6
BonShaw

Windows 7 x64 Professional
 
 

Hi Richard,

Thank you so much for your help. I very much appreciate your interest and skills! The SP1 update still fails after rebooting. I have attached the CBS log. Regards!
My System SpecsSystem Spec
14 Jul 2011   #7
niemiro

Vista Home Premium x86 SP2
 
 

Hello again!

Well, I have worked out what the problem is, anyway! Thanks for uploading the log files!

Please re-run the System Update Readiness Tool, and re-post a new C:\Windows\Logs\CBS\CheckSUR.log.

Hopefully that will show the error, otherwise I can do a manual fix job.

Basically, of those 134 errors, one did not fix correctly. There was a replacement, hence why all were reported as fixed, but actually one file got replaced with the wrong file in some confusion.

This is nothing to worry about. We shall just replace it again. So, 133 down, 1 to go.

Thanks a lot!

Richard
My System SpecsSystem Spec
14 Jul 2011   #8
BonShaw

Windows 7 x64 Professional
 
 

Okay, I reran SURT, rebooted and tried SP1 again without success. My log is attached.
My System SpecsSystem Spec
14 Jul 2011   #9
niemiro

Vista Home Premium x86 SP2
 
 

Hello!

Sorry about this dragging on a little. I only need a few more posts, and I will be done! We are literally on the verge of fixing this machine once and for all.

Please delete this file: C:\Windows\CheckSur\v1.0\windows6.1-7601-x64-clientcab4.cab

For the moment, please leave it in your Recycle Bin.

Then please run the System Update Readiness Tool one more time, and upload a new log (C:\Windows\Logs\CBS\CheckSUR.log)

Thanks a lot!

Richard
My System SpecsSystem Spec
14 Jul 2011   #10
BonShaw

Windows 7 x64 Professional
 
 

Moved it to the bin, reran SURT and tried SP1 without success. Please see attached.
My System SpecsSystem Spec
Reply

 Windows SP1 Update Failure




Thread Tools




Similar help and support threads
Thread Forum
Windows 7 - Update KB976932 and KB982526 update failure- error 800b100
Hey, I'm trying to install update KB976932 (Windows Service pack 1 for 64bit) and KB982526 (Microsoft .NET Framework 3.5 SP1) but I keep getting error 800b100 which stops me from doing so. I've tried deactivating my firewall; manually installing from the microsoft website; and using the...
Windows Updates & Activation
KB2604121+KB2468871 update failure+ SFC /scannow failure to repair
First ever Post I think (memory at 77 not brilliant): with updates first received error 0x8024402C. Tried lots advice from different sites: regarding Proxy etc.; CHKDSK; Repair from installation CD; SFC /scannow; produced sfcdetails.txt;today ran KB947821. following 947821 tried updates again...
Windows Updates & Activation
Windows 7 Pro 64-Bit Update Failure
Error Code 800B0100 for Windows Update manager. Attempted troubleshooting so far (run multiple times) - IfixIt clients, System Readiness Tool, and the Automatic Troubleshooter. Followed up with SFC /SCANNOW run as admin on command prompt. Repeated previous steps multiple times. The...
Windows Updates & Activation
Windows 7 Update Failure
Several attempts to install Windows 7 updates KB2894854, KB2972216 and KB2889914 have all failed with error codes 641 and 6B7. I have also received errors 0X80070641 (Windows Installer Service could not be accessed), 0X80070057, and 0X80240009 (Installer encountered error) during my troubleshooting...
Windows Updates & Activation
Windows 7 Update Failure
Been having window 7 pro update problem for about a year now. I had to reload OS twice. It works for several months and then the same problem. Now I can't even update anything. Below are the error messages I get. The 1st screenshot is when I launch windows update. The 2nd is when I click check...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:59.
Twitter Facebook Google+ Seven Forums iOS App Seven Forums Android App