Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Multiple issues after update (sfc /scannow and CheckSUR logs included)

31 Mar 2013   #41
EWG

Windows 7 Home Edition, 64bit
 
 

Got an error message trying to run the command:

RegSvr32


The module "C:\Windows\System32\wininet.dll" was loaded but the entry-point DIIRegisterServer was not found.

Make sure that "C:\Windows\System32\wininet.dll" is a valid DLL or OCX file and then try again.


My System SpecsSystem Spec
.
31 Mar 2013   #42
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

In that case you have corrupt files on the system - either from malware, or from other causes.
Please upload the wininet.dll file to www.virustotal.com and post a link to the result.
My System SpecsSystem Spec
31 Mar 2013   #43
EWG

Windows 7 Home Edition, 64bit
 
 

My System SpecsSystem Spec
.

31 Mar 2013   #44
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

The SHA256 hash is very different to my copy.
Ouch! - I just realised why....
I gave you the 32-bit copy to put in the 64-bit system32 folder!
I've obviously spent too much time in from of the screen today

Back to the start again....

Open an Elevated Command Prompt, and run the following commands

Code:
 
DEL C:\Windows\System32\wininet.dll 
COPY C:\Windows\winsxs\amd64_microsoft-windows-i..tocolimplementation_31bf3856ad364e35_9.4.8112.16470_none_765021d974a046ef\wininet.dll  C:\Windows\System32 /Y
ICACLS C:\Windows\System32\wininet.dll /grant "NT SERVICES\TrustedInstaller":(F)
 
.
then reboot and run
regsvr32 C:\Windows\System32\wininet.dll

post the results, and try the ServicesRepair tool again.

Sorry about that!
My System SpecsSystem Spec
31 Mar 2013   #45
EWG

Windows 7 Home Edition, 64bit
 
 

No worries, I appriciate all the time spent thus far (up to 5 pages!).

Attempting run the DEL command results in the following error:

C:\Windows\System32\wininet.dll
Access is denied.


Attempting to delete the file via right-click, delete, results in the following error:

File In Use

The action can't be completed because the file is open in another program

Close the file and try again.
My System SpecsSystem Spec
31 Mar 2013   #46
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Close Internet Explorer, and open Task Manager - ensure that iexplore.exe (or servicesrepair.exe) is not running (or boot to Safe Mode and try again)
My System SpecsSystem Spec
31 Mar 2013   #47
EWG

Windows 7 Home Edition, 64bit
 
 

IE was not open (I use Firefox).

Rebooted into Safe Mode and confirmed that neither of processes you mention were running.

I still get the same error when trying to delete the file.
My System SpecsSystem Spec
31 Mar 2013   #48
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

System File Protection must be guarding it then.
An idea strikes... please run SFC /SCANNOW and post the new CBS.log - let's see what it can do...
My System SpecsSystem Spec
31 Mar 2013   #49
EWG

Windows 7 Home Edition, 64bit
 
 

Done. Log attached
My System SpecsSystem Spec
31 Mar 2013   #50
NoelDP

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
 
 

Bother! even now it doesn't see the file.

OK - we'll have to do it the hard way.

Please first run the following commands

MD C:\ewgab
COPY C:\Windows\winsxs\amd64_microsoft-windows-i..tocolimplementation_31bf3856ad364e35_9.4.8112.16470_none_765021d974a046ef\wininet.dll C:\ewgab


(It would be a good idea to print thes instructions out!)
Reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\ewgab

hit the enter key - if you get a 'Not Found' error try
DIR D:\ewgab

or
DIR E:\ewgab


The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY <drive>:\ewgab <drive>:\windows\System32 /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.


Now run the following commands
DIR C:\Windows\System\Wininet.dll
DIR C:\ewgab /S
ICACLS C:\Windows\System\Wininet.dll

and post the results

Then try running the ServicesRepairr tool again.
My System SpecsSystem Spec
Reply

 Multiple issues after update (sfc /scannow and CheckSUR logs included)




Thread Tools




Similar help and support threads
Thread Forum
Fail to update KB3074543 - CHECKSUR log included
I've copied KB3074543 to the Checksur/packages folder but doesn't seem to help. Log: ================================= Checking System Update Readiness. Binary Version 6.1.7601.22471 Package Version 26.0 2016-10-26 19:00
Windows Updates & Activation
Multiple BSODs, logs included - Need Help ASAP!
I am getting these seemingly random BSODs that are driving me crazy, I've logged them all here, some are from one specific driver, others are unrelated. If you all could help me identify which drivers these are and how to rectify to the issue, I'd be so grateful. Thank you! ...
BSOD Help and Support
Win 7 Pro -Office 2010 Pro - .exe .dll issues CheckSUR log included
Ladies and Gents Have tried all sorts of tricks here - I think I am close soooo close. Started with - Re looping System Repair - Now fixed from this Which was great, however left me with MS Office 2010 no longer operating giving me this: (Note the CheckSUR log in the background for ref...
Microsoft Office
ERROR_SXS_COMPONENT_STORE_CORRUPT CheckSUR log included please help!
I'm trying to get windows 7 sp1 installed but nothing i do works. I've ran the system update readiness tool with no luck, tried a manual instal with no luck. Looked through my computer for outdated drivers and programs that could be blocking the update with no luck. I've finally got somewhere but...
Windows Updates & Activation
Windows update error code 800F0900, logs attached (CBS and checksur)
Hello All, Before reinstalling Windows (on my 6 months old new laptop) I ask please for help. I see these issues for the last months (Windows update was fine, Snipping tool stopped working and then I discovered the CBS logs) and I hope no other (office files in example) files will be damaged. ...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:31.
Twitter Facebook Google+