Windows 7: Errorcode 800B0100 when trying to install SP1 for Win 7

NoelDP · 18 Sep 2013

I've uploaded a file - gsnab.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print theseinstructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, starttapping F8 - this should bring up the Advanced Boot Menu, at the top of whichshould be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\gsnab
hit the enter key - if you get a 'NotFound' error try
DIR D:\gsnab
or
DIR E:\gsnab

The drive letter in use when you find the folder willneed to be substituted (for<drive>) into the followingcommand...

XCOPY<drive>:\gsnab <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)andwhen the prompt returns, type
EXIT
and hit the Enter key to exit CommandPrompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in anElevated Command Prompt
then reboot and upload the new CBS.log file to your reply

GudrunSchyman · 18 Sep 2013

Apperently you got sidetracked again ^^

NoelDP · 18 Sep 2013

Yeah - comes of having three jobs and a hobby :)

GudrunSchyman · 18 Sep 2013

Take your time :)

NoelDP · 18 Sep 2013

The file should be up??

GudrunSchyman · 18 Sep 2013

Oh, saw it now. Will do this and get back to you.

GudrunSchyman · 18 Sep 2013

The CBSlog.

NoelDP · 18 Sep 2013

Hmmm- there's now a different error in the SFC....

Code:

 Line 68892: 2013-09-18 23:01:56, Info                  CSI    0000043f [SR] Repairing 1 components
 Line 68893: 2013-09-18 23:01:56, Info                  CSI    00000440 [SR] Beginning Verify and Repair transaction
 Line 68896: 2013-09-18 23:01:56, Info                  CSI    00000442 [SR] Cannot repair member file [l:36{18}]"Pretty_Peacock.jpg" of Microsoft-Windows-TabletPC-Journal, Version = 6.1.7601.17803, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type neutral, TypeName neutral, PublicKey neutral in the store, hash mismatch

- although that shouldn't affect the ability to update, I'll post a fix for it in a few minutes, while you do a new manual Check for Updates, and see what WU has to say.

NoelDP · 18 Sep 2013

I've uploaded a file - gsnac.zip - to my SkyDrive at Noel's SkyDrive
Please download and save it.

Right-click on the saved file and select Extract all...
Change the target to C:\ and click on Extract
Close all windows (it would be a good idea to print these instructions!)
Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
Pick that
You'll have to log in with your username and password.

Pick the option to use a Command Prompt
At the prompt type
DIR C:\gsnac
hit the enter key - if you get a 'Not Found' error try
DIR D:\gsnac
or
DIR E:\gsnac

The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...

XCOPY<drive>:\gsnac <drive>:\windows\winsxs /y /i /s /v /h

(e.g.XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )

run the command (it should take almost no time)and when the prompt returns, type
EXIT
and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

Now run SFC /SCANNOW in an Elevated Command Prompt
then reboot and upload the new CBS.log file to your reply

GudrunSchyman · 19 Sep 2013

CBSlog attached.

These three WU are the ones that won't install:

Update for Windows 7 for x64-based Systems (KB2761217)

Security Update for Windows 7 for x64-based Systems (KB2705219)

Update for Windows 7 for x64-based Systems (KB2506928)

I get errorcode 8007065E when trying to install them.