Tried to install Service Pack 1, now I'm getting various errors

Page 1 of 6 123 ... LastLast

  1. Posts : 29
    Windows 7 Ultimate x32
       #1

    Tried to install Service Pack 1, now I'm getting various errors


    I have tried removing the update but it doesn't show up under uninstall updates yet under installed updates it shows that today at 1:51am it was installed, there was also an update in there that wouldn't give me the option to remove it but it disappeared when I cleared the updater cache.. I've tried doing a system restore at various points and it always tells me that it failed and could not change system files or settings. And I've even tried going to Windows Update to install files that maybe I need for this to work but I get the 80072efe error every single time that I try. I ended up trying various things like the Windows Update tool and MS Fix It and neither worked. The Windows Update tool told me that the error is a problem that occurred while installing an update. I tried downloading the standalone SP1 for Windows 7 x32 and it gave me a 0x80080005 error and that same error is now popping up when I try to do the install from Windows Update. I have Windows 7 Ultimate.
      My Computer


  2. Posts : 1,810
    Dual Boot: Windows 8.1 & Server 2012r2 VMs: Kali Linux, Backbox, Matriux, Windows 8.1
       #2

    Hello rskfx,

    Can you go through the steps and post the required information from the link below?

    Windows Update Posting Instructions
      My Computer


  3. Posts : 29
    Windows 7 Ultimate x32
    Thread Starter
       #3

    Step 1 installed the hot fix and didn't show any error until I ran the updater which gave me the error code 80080005.

    Step 2 tells me for the sfc /scannow option "Windows Resource Protection could not start the repair service." And doing a system restore ends up just telling me that nothing can be changed.

    Step 3 the only error code I am getting now is the 80080005 error, although Windows Update Diagnostic tells me "Problems installing recent updates."

    Step 4 I added the CBS document to this post.

    EDIT: I ran the update diagnostic test again and got two errors. I get the "Problems installing recent updates" and now "Windows Update error 0x80080005(2014-12-16-T-03_12_18A)" and the detailed gives me the information that I attached with the CBS file.
    Last edited by rskfx; 16 Dec 2014 at 03:25.
      My Computer


  4. Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       #4

    PLEASE follow the instructions that Cator posted - we need ALL the data requested to be able to properly diagnose and repair the error

    Here's what appears to be the critical error from the posted data - from your further attempt to install SP1...
    Code:
    2014-12-15 23:02:18, Info                  CBS    Failed to load Core DLL from path: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll [HRESULT = 0x8007007e - ERROR_MOD_NOT_FOUND]
    2014-12-15 23:02:18, Info                  CBS    Failed to initialize CBS Core. [HRESULT = 0x8007007e - ERROR_MOD_NOT_FOUND]
    ...but it's no use fixin that if there are still a lot of other errors that need fixing.
      My Computer


  5. Posts : 29
    Windows 7 Ultimate x32
    Thread Starter
       #5

    NoelDP said:
    PLEASE follow the instructions that Cator posted - we need ALL the data requested to be able to properly diagnose and repair the error

    Here's what appears to be the critical error from the posted data - from your further attempt to install SP1...
    Code:
    2014-12-15 23:02:18, Info                  CBS    Failed to load Core DLL from path: C:\Windows\winsxs\x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049\cbscore.dll [HRESULT = 0x8007007e - ERROR_MOD_NOT_FOUND]
    2014-12-15 23:02:18, Info                  CBS    Failed to initialize CBS Core. [HRESULT = 0x8007007e - ERROR_MOD_NOT_FOUND]
    ...but it's no use fixin that if there are still a lot of other errors that need fixing.
    I'm not sure what I'm supposed to post. The first thing just told me that it installed the hot fix. And the sfc /scannnow doesn't work for me. I tried over and over but it keeps telling me that "Windows Resource Protection could not start the repair service." I get Error 126 when I try to start the Windows Modules Installer. Also, the only error code I'm receiving is the 80080005 when I click to search for updates and when I run the Windows Update Diagnostic.
      My Computer


  6. Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       #6

    You are supposed to post the WHOLE CBS folder - not just the CBS.log file. Please read the link Gator posted again.
      My Computer


  7. Posts : 29
    Windows 7 Ultimate x32
    Thread Starter
       #7

    NoelDP said:
    You are supposed to post the WHOLE CBS folder - not just the CBS.log file. Please read the link Gator posted again.
    I added the whole folder this time. Hopefully that can tell you because I really need to fix this fast. A job I'm trying to get depends on it.
      My Computer


  8. Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       #8

    You still haven't included the older CBSPersist files - these are important as they contain currently your SFC results.
    The CheckSUR results show the following problems...
    Code:
    (f) CSI Payload File Missing 0x00000000 dpx.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 poqexec.exe x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 cmiadapter.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 fastprox.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 helpcins.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 CbsCore.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 apircl.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 CntrtextInstaller.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 smiengine.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 drvstore.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 PkgMgr.exe x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wdscore.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 smipi.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 cmiv2.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wcp.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wrpint.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wbemcore.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wbemcomn.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 wmicmiplugin.dll x86_microsoft-windows-servicingstack_31bf3856ad364e35_6.1.7601.17592_none_0b0e4b4025cf4049 
    (f) CSI Payload File Missing 0x00000000 ntoskrnl.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7600.16792_none_6bf8ee9215816c61 
    (f) CSI Payload File Missing 0x00000000 ntkrnlpa.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7600.16792_none_6bf8ee9215816c61 
    (f) CSI Payload File Missing 0x00000000 ntoskrnl.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.21701_none_6ec9394b2b7d606e 
    (f) CSI Payload File Missing 0x00000000 ntkrnlpa.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.21701_none_6ec9394b2b7d606e 
    (f) CSI Payload File Missing 0x00000000 ntoskrnl.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.17592_none_6ddf4b9812a7d84d 
    (f) CSI Payload File Missing 0x00000000 ntkrnlpa.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7601.17592_none_6ddf4b9812a7d84d 
    (f) CSI Payload File Missing 0x00000000 ntoskrnl.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7600.20941_none_6cb79c952e776446 
    (f) CSI Payload File Missing 0x00000000 ntkrnlpa.exe x86_microsoft-windows-os-kernel_31bf3856ad364e35_6.1.7600.20941_none_6cb79c952e776446
    The SFC scan may show more - or less.
      My Computer


  9. Posts : 21,482
    Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10
       #9

    Never mind - with luck this will repair things enough to get the SFC working properly...


    I've uploaded a file - rfxaa.zip - to my OneDrive at Noel's OneDrive
    Please download and save it.

    Right-click on the saved file and select Extract all...
    Change the target to C:\ and click on Extract
    Close all windows (it would be a good idea to print these instructions!)

    Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
    Pick that
    You'll have to log in with your username and password.

    Pick the option to use a Command Prompt
    At the prompt type
    DIR C:\rfxaa
    hit the enter key - if you get a 'Not Found' error try
    DIR D:\rfxaa
    or
    DIR E:\rfxaa



    The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



    XCOPY <drive>:\rfxaa <drive>:\windows\winsxs /y /i /s /v /h



    (e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



    run the command (it should take almost no time) and when the prompt returns, type
    EXIT
    and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

    Now run SFC /SCANNOW in an Elevated Command Prompt
    then reboot and upload the new CBS.log file to your reply
      My Computer


  10. Posts : 29
    Windows 7 Ultimate x32
    Thread Starter
       #10

    NoelDP said:
    Never mind - with luck this will repair things enough to get the SFC working properly...


    I've uploaded a file - rfxaa.zip - to my OneDrive at Noel's OneDrive
    Please download and save it.

    Right-click on the saved file and select Extract all...
    Change the target to C:\ and click on Extract
    Close all windows (it would be a good idea to print these instructions!)

    Now reboot to the Repair Environment - as soon as the machine restarts, start tapping F8 - this should bring up the Advanced Boot Menu, at the top of which should be the option 'Repair my Computer'
    Pick that
    You'll have to log in with your username and password.

    Pick the option to use a Command Prompt
    At the prompt type
    DIR C:\rfxaa
    hit the enter key - if you get a 'Not Found' error try
    DIR D:\rfxaa
    or
    DIR E:\rfxaa



    The drive letter in use when you find the folder will need to be substituted (for<drive>) into the following command...



    XCOPY <drive>:\rfxaa <drive>:\windows\winsxs /y /i /s /v /h



    (e.g. XCOPY P:\wfire P:\windows\winsxs /y /i /s /v /h )



    run the command (it should take almost no time) and when the prompt returns, type
    EXIT
    and hit the Enter key to exit Command Prompt - reboot to Normal Mode Windows.

    Now run SFC /SCANNOW in an Elevated Command Prompt
    then reboot and upload the new CBS.log file to your reply
    It finds the file but xcopy says "Access denied. Unable to create directory - C:\Windows\winsxs 0 files copied.
      My Computer


 
Page 1 of 6 123 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 11:10.
Find Us