Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: Windows Update Screwing With My Hard Drive

04 Jun 2015   #1

Windows 7 Home x64
Windows Update Screwing With My Hard Drive

Lately I noticed my hard drive was always extra busy to the point of causing my programs to stall with a not responding notice or to open very slowly. I managed to trace the slow down to the Windows update process. I had to disable it to get back control of my system.

Here's what else I noticed about Windows update gone screwy. First of all it seemed to have updated without my permission. I have my updates set to notify me but not to download and install automatically. I also requested only Windows important / security updates. But I restarted my computer the other day and the wait for install message came up, the one where it gives a percentage of how much progress is done.

I also discovered that my Windows update settings where all changed to automatic and download everything.

I'm blaming Microsoft and there bulling campaign to upgrade to Windows 10. You may have recently got a white windows logo down by your clock, the notification area as it was called. I think it's now called the system area.

Anyway after disabling Windows upadate through the control panel and in the services option I finally got control of my hard drive again.

I've been fixing computers now for almost 20 years and I can tell you Microsoft cannot build a secure system if their lives depended on it. That's why we have to keep updating and updating and updating.... It's secure because it's obscure. It's secure because it's new, NOT because it's secure.

To be fair I am fully aware that the weakest link in any security chain is the end user. What's the point of building a fortress around you if you leave the door unlocked or worst, invite the bad guys in.

Anyway I tried the usual fixes to this update issue but this time it doesn't work. I've downloaded numerous utilies over the years for fixing this issue and none of them work this time. I also tried to fix it manually by disabling the update service and removing the SoftwareDistribution folder but still nothing.

Windows 7 will be my last Windows system. As soon as this system is no longer viable I am seriously considering switching to Linux. I already tested installing various versions on an older computer I had lying around. To many issues to make it my main system right now.

Anyway I would like to keep receiving Windows security updates for as long as they are available but I can't enable the updates without my system coming to a crawl. It's a Windows 7 64 bit Acer desktop. Any suggestions?

System restore doesn't fix the problem either. I don't suspect any virus or malware.

My System SpecsSystem Spec
04 Jun 2015   #2

W7 home premium 32bit/W7HP 64bit/w10 tp insider ring
w10 upgrade KB's

Your WU option was changed by a specific KB, to allow and prepare 7/8/8.1 OS's for upgrade also via WU to W10.
There is also a requirement to be opted into the Customer Experience program.

There is a topic in this forum that lists the KB's, that need to be removed and then hidden, you can then reset your WU options as i have.
You will also need to opt out of CEP, via Controlpanel>Admintools>services, this removes the icon in your system tray

My System SpecsSystem Spec
04 Jun 2015   #3

Windows 7 x64 SP1

Quote   Quote: Originally Posted by alucardx View Post
I also discovered that my Windows update settings where all changed to automatic and download everything.
What I posted here may well be of some interest to you Windows 10 Update? as it's not just one of the KB's that will change the WU to auto there is a number of other things that can... for me there is not enough swear words in the dictionary to describe how annoying this all is, I also repair computers Sony Laptops mainly but currently in an Eastern country most of it is older equipment and it just can't handle all this HDD activity along with using up the very limited Internet bandwidth available, for me simply UN-installing these unwanted updates is not returning the systems back to their former clean working state.
My System SpecsSystem Spec

04 Jun 2015   #4

Microsoft Community Contributor Award Recipient

Win 7 x64 Home Premium (and x86 VirtualBox VM)/Win10

Please follow the Windows Update Posting Instructions and post the requested data

If the file is too large (8MB compressed), remove the older CBSPersist cab files until the final file is below the limit - you can always post them separately after zipping them. (the forum doesn't allow the upload of bare CAB files, for a number of reasons)

Please also post the C:\Windows\windowsudpate.log file


Open Event Viewer
click on the Windows logs entry in the left pane to expand it.
Now click on the Application entry - wait while it loads.
Click on 'File' in the menu bar and select Save...
Save the file as Appevt.evtx
Repeat for the System log
then zip both, and upload them.
My System SpecsSystem Spec
05 Jun 2015   #5

Windows 7 Home x64

I was going to follow the instructions posted by NoelDP. I had Windows update disabled and decided to enabled it first and let it run for an half hour or so to see if the problem would be recorded in any of the logs.

Then at the half hour mark, the Windows update notification popped up with a list of updates to install. I read a number of articles online about which updates to disable for that Windows 10 thing. So I right clicked on the updates associated with the upgrade and chose the option to hide them.

Everything seems to be back to normal now and after Windows 7 I'm still thinking Linux.

Thanks to all responders.
My System SpecsSystem Spec

 Windows Update Screwing With My Hard Drive

Thread Tools

Similar help and support threads
Thread Forum
Windows won't update after restoring image backup to new hard drive
Hello, everyone. After restoring a backup on a new hard drive I first got a message that Windows was not genuine, although Control Panel/System said it was. I have found threads that said it can take some time after restoring a backup on a new drive before Windows is recognized. I re-entered the...
Windows Updates & Activation
Windows 7 will not hibernate or update - new hard drive
I just created an image with windows 7 backup and recovery, restored that image to a new larger hard drive. Everything works great and just like before. Except for two things, Windows update keeps saying the service is not running and it is, and windows does not hibernate when I choose the...
General Discussion
Windows Update not working after new hard Drive installation
My old hard drive was dying, so I installed a new1tb Seagate HD. On to my Sony Vaio windows 7 Home prem 64 bit machine Now my windows update does not work, nor am I able to download anything from Microsoft. The error says Windows update stats the service is not running and I should restart my...
Windows Updates & Activation
2nd Hard drive disappeared after Windows Update
This morning I had a Windows 7 update waiting. I shut down to let it do the update and went to work. When I came home and started it back up it stayed hung-up on the startup screen for 15 minutes before I hard rebooted. When it came back up, the second drive disappeared from My Computer. I...
General Discussion
External Hard Drive Not Recognised Following Windows Update
Hi, I'm new here, so please don't shout at me if I say something stupid. :p Anyway, here's my problem: I have a Maxtor 500GB stand alone hard drive which I originally bought for a Vista laptop, but have also been using it on my new Win7 laptop. It has been absolutely fine for the 6...
Hardware & Devices

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 16:32.
Twitter Facebook