Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: KB3035583 Reappeared After Being Hidden

15 Oct 2015   #31
RedIndy

 
 

[/QUOTE]
I did not see where that Forbes article mentioned MS "forcing W10 to be installed" or "forcing W7 users to upgrade to W10".[/QUOTE]

@UsernameIssues:
It says in the headline: Microsoft Forces Windows 10 Onto Windows 7 And Windows 8!
It also is quite remarkable that MicroSoft confirms this as being "their new policy"!

Please to let me know if there is anybody out there having the same problems I had after yesterdays' patches, not being able to access the files on my C: drive.
The drive itself was visible and showed all directories, but it wasn't possible to access the files.

I am very curious as to what has caused this problem to occur.

Thanks in advance.

RI.



My System SpecsSystem Spec
.
15 Oct 2015   #32
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I had been free of this nightmare until shutting down last night. Damned MS forced something through even though I had chosen to let me decide. I go to shut down last night and 9 updates run through. I'm pissed. I had not seen win10 update since June and bang I'm right back there again.
My System SpecsSystem Spec
15 Oct 2015   #33
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Unifex, LadyFitz and UserName, I am following along with the disable upgrade in Group Policies,,,fingers crossed.

Roland, how are you making out with having run that batch file? I'll wait to run it until I hear how your luck is going.

Thanks to All who are contributing, except MS.
My System SpecsSystem Spec
.

15 Oct 2015   #34
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by cyclops View Post
Unifex, LadyFitz and UserName, I am following along with the disable upgrade in Group Policies,,,fingers crossed.

Roland, how are you making out with having run that batch file? I'll wait to run it until I hear how your luck is going.

Thanks to All who are contributing, except MS.
I never could find where or how to disable the upgrade in Group Policies.
My System SpecsSystem Spec
15 Oct 2015   #35
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

LadyFitz, I hope this helps


My System SpecsSystem Spec
15 Oct 2015   #36
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by cyclops View Post
LadyFitz, I hope this helps

That was absolutely worthless. See my rant in post #24.
My System SpecsSystem Spec
15 Oct 2015   #37
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

LadyFitz, sorry. You seem frustrated with that. May I say that I have had no problem finding it. Anything I can do to help? PM me if you'd like to.
Brian
My System SpecsSystem Spec
15 Oct 2015   #38
Lady Fitzgerald

Win 7 Ultimate 64 bit
 
 

Quote   Quote: Originally Posted by cyclops View Post
LadyFitz, sorry. You seem frustrated with that. May I say that I have had no problem finding it. Anything I can do to help? PM me if you'd like to.
Brian
Frustrated is the mild word for it. Obviously, we have a failure to communicate.

OK, I followed the directions in your Word doc to get to Local Group Policy Editor. Here is what I got:

KB3035583 Reappeared After Being Hidden-capture.1.jpg

The next step is to go to Administrative Templates. Which one? I have two of the *&^%$#@! things and your directions don't tell me which one to go to.


My System SpecsSystem Spec
15 Oct 2015   #39
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

LadyFitz, here are screenshots window by window
My System SpecsSystem Spec
15 Oct 2015   #40
cyclops

Microsoft Windows 7 Ultimate 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I did it for the computer setting and when I went to do the user it was already in place
My System SpecsSystem Spec
Reply

 KB3035583 Reappeared After Being Hidden




Thread Tools




Similar help and support threads
Thread Forum
missing KB3035583
Any one know where I can find KB3035583 for 86 bit windows 7 ultimate 7
Windows Updates & Activation
Get rid of Win 10 icon after uninstalling KB3035583
Hi, I've just installed Windows 8 on a laptop, and the Windows 10 icon showed up, as it does. Usually, when that happens and I don't want to upgrade to Windows 10, I simply uninstall KB3035583. And it works, although I need to hide it from updates so that it doesn't bug me. The problem now is...
Installation & Setup
A way to download KB3035583?
Back when that round of updates came out to implement the Windows 10 update scheme, I dutifully removed them and hid them. Now I'm curious to see how it all works, so I went to unhide and update again. All of the updates that I'd hidden were there, except 3035583 - it seems to have vanished! I...
Windows Updates & Activation
Get Windows 10 App KB3035583
Why did this update ask me to install it for a 3rd time on both my computers. I already successfully installed it twice before according to my update history?
Windows Updates & Activation
KB3035583 Query
Hi, After checking Window Update today I've noticed 5 optional updates and 1 important (KB3035583) are available. I have the 'Get Windows 10' icon but don't want to update just yet. I've heard the above update has something to do with automatically upgrading to 10. Should I still install these...
Windows Updates & Activation


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 02:11.
Twitter Facebook Google+