Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.

Windows 7: KB4019112 problem

12 May 2017   #1

Windows 10 Pro 64-bit
KB4019112 problem

So I was installing this update on 4 Windows 7 64-bit machines (3 Pro and 1 Home). The Home one went fine, but my other systems are stuck at various levels.

Computer A - Desktop, downloaded and installed, rebooted and has been at "Configuring Windows update 61% complete. Do not turn off your computer" for 2 hours now

Computer B - Identical in hardware. Downloaded and installed, rebooted and has been at "Configuring Windows update 67% complete. Do not turn off your computer" for 2 hours now

Computer C - Laptop. Downloaded and installed, rebooted and has been at "Preparing to configure Windows. Do not turn off your computer" for 3 hours now

So what to do here? Anyone else having this issue? Another bad roll-up from Microsoft? I have 4 more systems to do and not going to even touch those or used them as "try on one of those systems" to find out what is going on.

Wrong update mentioned that is causing this: KB4019264 is the one doing this

My System SpecsSystem Spec
12 May 2017   #2

Windows 7 SP1 64 bit
KB4019112 Problem

I am having a similar problem. Yours involves trying to install a downloaded file while mine is one in which the file will not download at all. This update was one of three in which the other two downloaded and installed perfectly. The downloading would fail and when I selected "Try Again" it would resume where it left off. It slowly crept up to 98% after many retries and then I got the failure message again. I clicked on "Try Again" and it showed progress as 21%. I have a download limit so I am not going to waste my time repeatedly trying to download this file.
My System SpecsSystem Spec
13 May 2017   #3

Windows 10 Pro 64-bit

Well, leaving these systems all night and they are still where they are at. A friend of mine is also having an issue, but in his case he was installing the NET framework KB4019112. All looked fine until he got to the desktop where his system froze, some icons became blank. Left system on all night as well and this morning still frozen system.
My System SpecsSystem Spec

13 May 2017   #4

Windows 10 Pro 64-bit

Update: So I got my systems back by method of shutting service down and install manually. KB4019264 went smoothly this way; 3 for 3. Solved
My System SpecsSystem Spec
14 May 2017   #5

Windows 7 SP1 64 bit
KB4019112 Problem

Well, I think the issue may be that the update covers many different versions of NET. When I went to Windows update catalog and entered KB4019112 there were 3 different versions. Interestingly, none were the 77 Mb that Windows Update reported. Clicking on the largest led me to a page with an error, The second largest opened a page with three 3 .exe files with different KB numbers. I had to enter each one in Windows support to determine which I needed. I selected the one appropriate for my system and did a manual install in which all went fine. Windows Update still reported KB4019112 as an important update so I had to hide it.

This was a royal pain in which the descriptions for the different files were vague or non-existent. Here are screenshots of the files I dealt with.

Attached Thumbnails
KB4019112 problem-ss02-14-may-17-16.06.jpg  
Attached Images
KB4019112 problem-ss03-14-may-17-16.09.jpg 
My System SpecsSystem Spec
22 May 2017   #6

Windows 7 64-bit Professional

Same thing here after installing 70 updates on a Client's laptop. Fails only on KB4019112. It is buggy and I will wait for next month's. Only addresses NET Framework anyway. The other three installed perfectly on 4 different laptops. Only trouble with one. If I have trouble next time, I will manually install from update store.
My System SpecsSystem Spec
25 May 2017   #7

Windows 7 SP1 64 bit

Well today I saw there was an optional update available (May, 2017 Preview of Quality Rollup for .NET Framework 3.5.1, 4.5.2, 4.6, 4.6.1, 4.6.2 on Windows 7 and Server 2008 R2 for x64 (KB4019288)) and discovered that this too will not install. Same problem as before; the download stalls at a certain percent. So it seems likely that future .NET Framework updates are all going to have the same problem. Good job, Microsoft. You continue to disappoint your users.
My System SpecsSystem Spec
26 May 2017   #8

Windows 7 sp1 64 bit

Thank you for this heads up...
I had downloaded the updates but
will not install them straightaway...
My System SpecsSystem Spec

 KB4019112 problem

Thread Tools

Similar help and support threads
Thread Forum
KB4019112 & KB4019264 will not configure after installation
For the 2nd month in a row Windows Updates hang when configuring at re-start. The installation goes well but when asked to restart the process of configuring the update hangs at 30%. I have left this for over an hour. Switching off and reboot allows me to revert from the new update. The...
Windows Updates & Activation
Intel Rapid Storage Technology problem : Empty port problem
Windows 7 Home Premium, 64 bit Gateway Laptop NV55C (I would upgrade ut currently not working so a major hardware upgrade is gonna have to wait :( I've got the latest SATA AHCI Driver for my system according to Gateway. As for the latest Intel RST software/drivers, I have version on...
Hardware & Devices
Blurry Text problem, EDID and registry editing problem on an AMD card.
EDIT:I have found a solution, using a DVI to HDMI cable on an amd card will fix this problem, this thread can now die, hopefully someone else will find it if they have this problem. Basically, i know what the problem is, but not how to rectify it. My tv (Sceptre X235BV-FHD, a rebranded sony...
Graphic Cards
Desktop icon problem, programs in start menu problem and more...
Hello guys, For some reason my computer have some problem(s) that I don't know where it come from and how to solve it. I got this problem for 3 days and I have tried to fix it but to no avail and i have pretty much lost hope, because I have some important documents for school etc. and videos,...
General Discussion
Windows Media Player Problem - Sound/skipping problem.
Oh look, another windows media player problem, lol. Well, it's something really weird, at first i thought it was just my computer being all slow or the file was messed up, No matter what movie or format i play it makes this weird screeching noise. It also lags pretty bad. I tried the scans, i did...
Music, Pictures & Video

Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 19:45.
Twitter Facebook Google+