Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Definitive answer to Windows 7 updates after clean install?

22 Feb 2018   #21
7point5

windows
 
 

Quote   Quote: Originally Posted by Paul Black View Post

As mentioned in my post #15 that KB3177467 supersedes/replaces KB3020369 this is true.
However, it is NOT suitable as a prerequisite for the offline installation of the KB3125574!
correct - that's cause like I said NO OTHER UPDATE can be integrated offline after you've integrated KB3177467. basically it's a "final" update (any other update after that has to be added online)

as to why MS decided to make
KB3177467 final - go figure probably to piss us off

Quote:
Also, I found a possible reason why I was successfully able to integrate KB3020369 and then it gave me an error when I tried to integrate KB3125574. I have read on a couple of sites that KB3125574 needs to be done as a seperate session. By this I assume that they mean once the KB3020369 has been applied and completed successfully then I need to Unmount and Re-Mount to continue? Or is there something else that I need to do?
nope all the updates in my list (including the SSU & superrollup) I added in 1 session only unmounted once (after all the updates been added)


My System SpecsSystem Spec
.
23 Feb 2018   #22
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Thanks 7point5,

I am going to run the updates below tomorrow and see how I get on. Do the DISM commands look good to you?

KB3020369
Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb3020369-x64_5393066469758e619f21731fc31ff2d109595445.msu

KB3125574
Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.msu

KB3172605
Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb3172605-x64_2bb9bc55f347eee34b1454b50c436eb6fd9301fc.msu

KB3179573
Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb3179573-x64_0ec541490b3f7b02e41f26cb2c444cbd9e13df4d.msu

KB4074598
Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb4074598-x64_ 87a0c86bfb4c01d9c32d2cd3717b73c1b83cb798.msu

The .msu's are not in the file name in the folder but I added them to the DISM command.

If that all works I assume that a Windows Update will only produce:

KB3184143
KB3161102
KB4019990
KB4054998
KB4018271
KB3177467
...etc.

Thanks in advance.
My System SpecsSystem Spec
23 Feb 2018   #23
7point5

windows
 
 

dunno tbh DISM command syntax vary a lot with every OS you'll have to trial & error but you'll know at once if it's the good syntax or not
what environment you running dism from?
My System SpecsSystem Spec
.

24 Feb 2018   #24
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Hi 7point5,

I am going to be running it in Windows 7 with WAIK installed and then test in VirtualBox.
Out of interest, what did you use to integrate the updates?

Thanks in advance.
My System SpecsSystem Spec
24 Feb 2018   #25
7point5

windows
 
 

Quote   Quote: Originally Posted by Paul Black View Post
Hi 7point5,

I am going to be running it in Windows 7 with WAIK installed and then test in VirtualBox.
Out of interest, what did you use to integrate the updates?

Thanks in advance.
I ran windows 7 PE x64
basically a mini version of win7 it's a recovery environment the iso's really small only 160mb which I installed on a usb flash drive (with freeware Rufus app to make it bootable it keeps things simple)

in fact it's so small that it don't even have windows explorer.exe so to be able to see the folders & files in that environment I added another small freeware app on the flash drive: Explorer64.exe (it's an alternative to the standard windows explorer)

once the install.wim (and possible the boot.wim if I edit it to integrate drivers) is modified I make a new iso out of the original win7 SP1 iso then test it in virtualbox too



anyway if ur running from a normal win7 then syntax should be the same & what you wrote looks ok

BUT if you add large packages (like the superrollup) you could get an error tho can't remember which exactly. if so you must use the /scratchdir option to the addpackage command (and use a "scratch directory" large enough many GBs where dism can store temporary files during the integration of the packag. that dir must be NTFS of cos & it's even better if it's on a different hard drive)
so syntax kinda like this:

Dism /Image:C:\Win7ISO\OFFLine /scratchdir:Z:\ /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-kb3125574-v4-x64_2dafb1d203c8964239af3048b5dd4b1264cd93b9.msu
My System SpecsSystem Spec
24 Feb 2018   #26
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Quote   Quote: Originally Posted by Paul Black View Post
I setup:

A folder: C:\Win7ISO (and extracted the ISO files to it).
A folder: C:\Win7ISOUpdates (and put the 6 downloaded updates above from Windows Catalog into it).
A folder: C:\Win7ISO\OFFLine (this was created by the mkdir C:\Win7ISO\OFFLine command).

I ran:

Dism /Get-WIMInfo /WimFile:C:\Win7ISO\sources\install.wim - Successful.
mkdir C:\Win7ISO\OFFLine - Successful.

Dism /Mount-WIM /WimFile:C:\Win7ISO\sources\install.wim /Name:"Windows 7 HOMEPREMIUM" /MountDir:C:\Win7ISO\OFFLine - Successful.

Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-KB3020369-x64.msu - Successful.

Dism /Image:C:\Win7ISO\OFFLine /Add-Package /PackagePath:C:\Win7ISOUpdates\windows6.1-KB3125574-v4-x64.msu - Unsuccessful.

Everything went well until I tried to integrate the Convenience Rollup Update Package KB3125574 ABOVE:
It said that the Component store had been corrupted. It gave me an error: 0x80073712
This evidently means that the file required to Windows Update Centre is damaged or missing?
Thanks 7point5,

The above quote which I posted earlier in this thread was how things went when I first tried this.

Thanks in advance.
My System SpecsSystem Spec
Reply

 Definitive answer to Windows 7 updates after clean install?




Thread Tools




Similar help and support threads
Thread Forum
Clean Install Of Windows 7 Stuck on Searching For Updates
I'm after doing a fresh install of 7 on a friends Samsung laptop and it will not update, it has kept searching for updates for 2 days, I've tried Microsoft fix it, I've stopped it through command prompt and restarted Windows update and it still won't update. I'm kinda stuck at the moment. Any...
Windows Updates & Activation
Clean install of Windows 7 - what updates are needed?
My HP Pavilion Elite 110F had so many issues that I decided to do a clean install of Windows 7 so I could move forward and only download programs that I need currently. The clean install went fabulously, however, now I have 135 Important Updates and 57 Optional updates. There are 20+ Microsoft...
Windows Updates & Activation
Windows, Mac, & Linux -- The DEFINITIVE answer
Hi all I think THIS should settle the issue once and for all. Cheers jimbo
Chillout Room
Canít find a definitive answer; clean install/upgrd ver
Has it been determined if you can use a valid Vista disk to validate a clean Win 7 install from an upgrade version? If that isn't clear; can I do a clean install on a formatted HD with the Win 7 upgrade version by inserting at some point, my original Vista disk? Thanks Roll
Installation & Setup


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd

All times are GMT -5. The time now is 18:59.
Twitter Facebook Google+