Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Failed KB4462923 update (also tried stand alone)

16 Oct 2018   #1
HAVOC

Windows 7 Professional 64bit
 
 
Failed KB4462923 update (also tried stand alone)

Computer is at work (Windows 7 Pro 32 bit)

Checked update history.

KB4462923 failed so I found on this forum where you can download the stand alone update. Did that and it says the update was successful. Restarted the computer, checked Windows update and the same KB# shows up. Installed it and it fails which turns into a boot loop that Windows cant fix and has to do a restore.


My System SpecsSystem Spec
.
17 Oct 2018   #2
wither 2

Windows 7 Pro SP1 64 bit
 
 

My System SpecsSystem Spec
18 Oct 2018   #3
HAVOC

Windows 7 Professional 64bit
 
 

Should I see if the computer in question has the servicing stack update?

I changed the settings for Windows update so it would notify but not download because when automatic updates was on, the computer would be in a boot loop every morning when I got to work. It's that computer that I use first thing in the morning to check in cars and dealing with this issue is a real pain.
My System SpecsSystem Spec
.

18 Oct 2018   #4
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, Kali, VMWare Workstation Player, OpenVPN
 
 

Give DISM++ a try!
Dism++ | New Windows Utility

My System SpecsSystem Spec
18 Oct 2018   #5
Paul Black

7 HP SP1 64-bit Vista HB SP2 32-bit Linux Mint 18.3
 
 

Hi HAVOC,

To run the DISM++ [Deployment Image Servicing & Management] Windows Updates on the LIVE OS, please follow my instructions below!

NOTE: The light blue text are links to the relevant websites and programs, just click them!

DISM++ - Basic Overview

DISM++ is a FREE implementation tool that has the ability to perform Windows Updates [WU]. Some of the advantages [but not all] are:

[1] The GUI is very easy to understand and use.
[2] It is much faster than M$’s WU because it uses a different engine.
[3] It downloads the DB from M$, scans your OS, and then lists the updates available.
[4] It gives you the option of what you want to install.
[5] It doesn’t install superseded updates like M$ does.
[6] It warns you of any suspect and Telemetry updates, and any updates that have known issues.
[7] It doesn’t require re-booting between updates.
[8] It can be used to either update an install.wim image offline, or to update the live OS.

DISM++ - Run Windows Updates On The LIVE OS

DISM++ Direct download [zip] => DISM++.
DISM++ Website [you will need to translate the page] => DISM++ |New Windows Utility.

Here is the quick procedure guide:

[1] Download the latest version of DISM++ [see the DISM++ Direct download [zip] link above].
[2] Extract the files using something like 7-Zip here => 7-Zip.
[3] Double-click Dism++x86 or Dism++x64 and then click Run.
[4] Click Updates in the left-hand pane and then click Scan [bottom right].
[5] Once the scan has completed, click Install Updates [blue button to the right of Scan].
[6] If any pop ups appear warning you of any undesirable updates [suspect, Telemetry, known issues], click Cancel and it will skip that one. There will be several of these that will appear so click Cancel to all of them.
[7] It is advisable to run the DISM++ WU a couple of times. To do this, just re-boot and Scan again [from number [04] above].
[8] Run M$ WU to see if there are any other updates available.

That's it!

Further information and aspects of the above are discussed and explained here => Update your Win 7 installation media. It is quite a long thread, but you will see the parts that are applicable!

Once you have your OS updated and running the way you like it, make a system image. This way, if things go wrong in the future, you will be able to restore your OS back to the exact same state that it is now in a very short time. This is because you will not have to install ALL the updates again, not to mention the amount of time needed to download and install them, and the numerous restarts needed. There are two imaging programs which are very popular among members here, the first is AOMEI Backupper Standard [FREE], and the second is Macrium Reflect [FREE].

I hope this helps!
My System SpecsSystem Spec
18 Oct 2018   #6
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, Kali, VMWare Workstation Player, OpenVPN
 
 

Have you tried installing KB from safe mode?
Press power button, immediately begin pressing <F8>, choose Safe Mode or Safe Mode with Networking.
My System SpecsSystem Spec
Reply

 Failed KB4462923 update (also tried stand alone)




Thread Tools




Similar help and support threads
Thread Forum
October 9, 2018 - KB4462923 (Monthly update) Windows 7
Source: Access Denied Direct download links for KB4462923 MSU file from Microsoft Update Catalog: :ar: Download KB4462923 MSU for Windows 7 32-bit (x86) - 145.5 MB :ar: Download KB4462923 MSU for Windows 7 64-bit (x64) - 238.1 MB
News
Security Update (KB2709715) - Failed to Update, Code 8020000E
G'day, I'm having some trouble installing the above update. I've run the MrFixIt utility, but still get an error trying to install this update. Can someone recommend a solution to try? This is an Asus X54C netbook running a clean install of Windows 7 Professional x64 OEM. Regards, Golden...
Windows Updates & Activation
Many failed update on history windows failed to configure startup
I have been receiving many failed updates, and i have tried methods like using the troubleshooting method to fix it. I have also tried downloading the updates from Microsoft center which still doesn't work as it stated as "ungenuine update"... I have been getting windows failure to update during...
Windows Updates & Activation
Windows 7 update failed and laptop won't boot. Startup repair failed
I installed the latest round of Windows updates for my Win7 x64 install and it never completed (ran for about 24 hours) so I powered off the machine. Upon restarting, it said: "Windows failed to start. A recent hardware or software change might be the cause" and has instructions for using system...
BSOD Help and Support
Stand alone MBAM update?
I am trying to get a friends computer connected to the internet at school. We have to ran a program called Cisco NAC Agent. It would not recognize her old AV as an AV. I installed MSE 2.0 Beta (I gave her the choice and she really wanted the beta version), but it will not recognize MSE either. I...
System Security


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 23:02.
Twitter Facebook Google+