Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: update problem after doing recovery

4 Weeks Ago   #11
Vineet Garg

Windows 7 Ultimate x32 With Sp1 + Vista Ultimate x32 with Sp1 & Sp2 !!
 
 

Hi All,
Greets,
SIW 2 : Sir, I did not know DISM++ can do so many things. Thanks for pointing me to that. You have come to his rescue in good time!
bigbobh : Sir, What better it could be : A very senior person is himself on guide. Now you are in safe hands. I would have helped you through the way A to Z as shown by Senior Sir but unfortunately, my mother has broken & dislocated her leg bone today. I don't know when i will be back on SevenForums next. I hope you understand.

All the best!

Thanks & Regards. ...


My System SpecsSystem Spec
.
4 Weeks Ago   #12
bigbobh

Windows 7 home premium 64 bit
 
 
problem with updates after recovery

Once I have backed up the activation code etc using DISM not sure I know how to do it but will try but after that how do I run the iso file that I already downloaded during the 24 hour period it was available I have it on a dvd non bootable. Do I have to make that a bootable or do I simply click on the file iso file to run it? Sorry if I am not getting this very quickly and thank you for your patience.
Bob H
My System SpecsSystem Spec
4 Weeks Ago   #13
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, & Kali
 
 

bigbobh,

Here's a little info/help for you:
Reinstalling Windows7x64.docx


My System SpecsSystem Spec
.

4 Weeks Ago   #14
bigbobh

Windows 7 home premium 64 bit
 
 

Snick
Thank you for the burning dvd advice I have used the img burn to burn the image on to a DVD and it says it completed successfully when I look in my computer the dvd is titled "DVD RW Drive(E:)
GSP1RMCHPXFRER_EN_DVD"
is that what it is supposed to look like before before I attempt to boot to it I want to be sure ? Thank you
Bob H
My System SpecsSystem Spec
4 Weeks Ago   #15
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, & Kali
 
 

That is the default title as presented through Heidoc. And yes to the question.
Important part now is to make sure you have your activation key (25 character key)
You can title the DVD in ImgBurn what you wish before you burn it, what you have is fine or you can burn another
To do so:
insert a blank DVD
open ImgBurn
click img to disk
right click the name after Label:
click change
make it what you want
apply
ok
My System SpecsSystem Spec
4 Weeks Ago   #16
SIW2

Microsoft Community Contributor Award Recipient

Vista x64 / 7 X64
 
 

Quote:
Once I have backed up the activation code etc using DISM not sure I know how to do it
just fire up dism++.

Click Toolkit in left pane. Then you see Active backup in main window. Click It.


update problem after doing recovery-dism-actbkup.jpg


Click Backup.

It is stored in the Dism++\ActiveBackup folder . That is why you must then copy the entire dism++ folder somewhere safe before reinstalling

update problem after doing recovery-dism-actbkup2.jpg





To backup drivers Click drivers in the left pane. Then tick any you want to backup . Then click Export - and browse to folder to export then to. Export into a folder somewhere safe - an external drive/usb stick, because you will need them later.

update problem after doing recovery-dism-export-drivers.jpg


My System SpecsSystem Spec
4 Weeks Ago   #17
bigbobh

Windows 7 home premium 64 bit
 
 
problem with updates after recovery

I have successfully installed windows 7 home premium sp1 along and am currently finishing updates. Thank you all so very much I had given up and without your kind patience and help I never would have been able to accomplish this. Again thank you all very much
Bob H
My System SpecsSystem Spec
4 Weeks Ago   #18
Snick

Win 10 x64, Linux Lite, Win 7 x64, BlackArch, & Kali
 
 

You make it easy for us by following instructions well.
My System SpecsSystem Spec
Reply

 update problem after doing recovery




Thread Tools




Similar help and support threads
Thread Forum
eSATA Data Disk Locks System Post Win10 Update-File Recovery Problem?
I posted this on tenforums.com 4 hours ago. There have been no replies. The reason for the 'dormancy' of the Win10 install is I preferred to continue to use Win7. As the end-of-life approaches I noticed articles suggesting that it might be wise to update my Win10 install so that my install is of...
Hardware & Devices
Lenovo E430 BJ9 after recovery cannot windows update.
Lenovo E430 BJ9 win 7 64 bit professional sp1 i recover my notebook to factory setting. after that tried to windows update, but it stuck at checking for updates screen. i'm using Eset Smart Security 9, have tried to disable firewall & protection while windows update, but still it just stuck at...
Windows Updates & Activation
startup repair infinite loop after BIOS update, recovery not working
Hello, I recently attempted to update my BIOS (Gigabyte F8 to F10) so that I could upgrade my CPU from a sandy bridge to an ivy bridge. I did not do the cpu upgrade, yet, just the BIOS flash. The flash, using Gigabyte's q-flash) went fine, according to the flash results screen. I then rebooted,...
General Discussion
Problem starting up after using samsing recovery basic recovery
After using samsung recovery, my computer won' t start properly. In normal mode it crashes immediately after loadin my background and desktop items. It shows a blue screen ( see image) and then will restart itself, giving me the option to start windows normally or in safe mode. I have tried safe...
General Discussion
Problem w/ creating recovery disc in Recovery Manager
I am running windows 7 on my laptop. I has windows vista before the upgrade. I had recovery discs for windows vista created from the recovery manager. I tried to make discs for windows 7. I would like to know why it won't let me make a disc for windows 7 because if I had trouble and needed to put...
Performance & Maintenance


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 00:50.
Twitter Facebook