Im trying to set up my 120GB ssd to be my main drive. After formatting my ssd I made a system image using the windows 7 tool. The image went onto my new ssd is there a way to just open it on the ssd and then set it up as my main boot drive or do I have to do something different. Thank you for your help.
For the SSD to boot it must be an active partition. If you are not sure how to do this refer to this tutorial. Good luck and be sure to ask if you have any further questions.
Please supply following:
HOW TO POST A SNAPSHOT OF DISK MANAGEMENT DISPLAY
Run disk management:
WIN | type DISKMGMT.MSC | ENTER
WIN=key with Microsoft logo on top.
Maximize the output of Disk Management:
ALT-Spacebar key combo | X key (selects Maximize) |
Drag the field separators (such as between Status and Capacity) to show entire field.
Make a snapshot:
WIN | type SNIPPING | ENTER | New
Drag the cursor around the area you want to snip.
File | Save as | select save location and name | Save
Post the snapshot:
Post a File or Screenshot in Seven Forums
=========================================
thanks,
karl
I'm not sure what you have done, but it sounds like you may have just made a system image file of C, storing that image file on your SSD.
That won't work if that's what you did. Image files by themselves do nothing.
You need to "restore" that image file before it will work. The image file should be stored on some other hard drive and then "restored" to the SSD.
It's difficult to tell what you actually did from the way your post is worded.
So we need to see the screen shot as Karl requested.
No.
Let's say you have a C partition on a regular hard drive.
The proper procedure would be to:
1: Use an imaging program to make an image file of that C partition, storing it on some other drive, such as an external.
2: Restore that image file to the SSD.
You can't "open" the image file itself and do anything with it. You have to "restore" it to the SSD.
Another option is to "clone" the C partition to the SSD, but imaging is more commonly used.
That changes things a little, you would have to restore that image to the SSD with a windows 7 recovery disk for this to work. A simpler route would be to image the drive with a free tool like Marcum Reflect.
Quote