Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD on normal boot, error 0x0000001E

01 Feb 2013   #11
witheea

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I'm back! And still having no luck

I've tried installing the Driver Fusion and it won't uninstall all my display drivers without a premium version. I've uninstalled as many as I can, but still no luck. I try running the AMD Driver Autodetect and still get the "detection driver failed to load" error.


My System SpecsSystem Spec
.
01 Feb 2013   #12
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

  1. Click on User CP on the top right of this page
  2. Click on Edit System Spec
  3. Fill in your computer specs
System Info - See Your System Specs

Are you still having BSOD?
My System SpecsSystem Spec
02 Feb 2013   #13
witheea

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

Unfortunately, I am. I just updated my system specs. I did remove my video card completely (I'm hoping this isn't permanently though, it's much better than the onboard). When I removed my video card, Windows booted fine, I ran Windows Update and it required a restarted. BSoD after I logged back in. Restarted in Safe Mode and got the BSoD again. I was able to get the computer to boot in Safe Mode the second time and ran Kaspersky's TDSS Killer. It removed something then restarted. Was able to boot normally and ran Malware Bytes. It found a couple things. Removed them, restarted again normally. I should clarify, it only starts normally under my wife's admin profile. Everytime I boot in my admin profile, I get the BSoD. I'm at a loss.
My System SpecsSystem Spec
.

02 Feb 2013   #14
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Please upload the latest crash reports. If you have time, make a scan with Windows Defender offline and I hope you have already installed Microsoft Security Essentials.

Take memtest. Run for 8 passes and test each stick in a know good slot for an additional 6 passes.
Quote:
The goal is to test all the RAM sticks and all the motherboard slots.

Check your motherboard manual to ensure the RAM sticks are in the recommended motherboard slots. Some motherboards have very specific slots required for the number of RAM sticks installed.

If you get errors, stop the test and continue with the next step.

1. Remove all but one stick of RAM from your computer (this will be RAM stick #1), and run Memtest86 again, for 7 passes.
*Be sure to note the RAM stick, use a piece of tape with a number, and note the motherboard slot.
If this stick passes the test then go to step #3.

2. If RAM stick #1 has errors, repeat the test with RAM stick #2 in the same motherboard slot.
*If RAM stick #2 passes, this indicates that RAM stick #1 may be bad. If you want to be absolutely sure, re-test RAM stick #1 in another known good slot.
*If RAM stick #2 has errors, this indicates another possible bad RAM stick, a possible motherboard slot failure or inadequate settings.
3. Test the next stick of RAM (stick #2) in the next motherboard slot.
*If this RAM stick has errors repeat step #2 using a known good stick if possible, or another stick.
*If this RAM stick has no errors and both sticks failed in slot#1, test RAM stick #1 in this slot.
4. If you find a stick that passes the test, test it in all the other motherboard slots.

If Part 2 testing shows errors, and all tests in Part 3 show errors, you will need to test the RAM sticks in another computer and/or test other RAM in your computer to identify the problem.

In this way, you can identify whether it is a bad stick of RAM, a bad motherboard, or incompatibility between the sticks.
information   Information
Errors are sometimes found after 8 passes.

Tip   Tip
Do this test overnight, before going to bed.

If Memtest86+ does not find any errors with ram run Windows Memory Diagnostics for 7-8 passes following its tutorial: Memory Diagnostics Tool
My System SpecsSystem Spec
05 Feb 2013   #15
witheea

Microsoft Windows 7 Home Premium 64-bit 7601 Multiprocessor Free Service Pack 1
 
 

I was away from the computer in error for a couple days so I let the Memtest86+ run through 85 passes. All passed.

I've attached new logs.
My System SpecsSystem Spec
05 Feb 2013   #16
koolkat77

Microsoft Community Contributor Award Recipient

Windows 10 Home 64Bit
 
 

Okay Let's run driver verifier and see if it catches any misbehaving drivers:
My System SpecsSystem Spec
Reply

 BSOD on normal boot, error 0x0000001E




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD during boot, stop error 0x0000001e
Full stop error: 0x0000001E (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000) Recent hardware changes: Msi Nvidia GTX 970 installed over a week ago with no problems Explanation: Hello, I've been having a rough one of it with a problem that started two days ago...
BSOD Help and Support
BSOD's consistantly while in normal boot
Ive been getting BSOD's like everytime I do simple things like log into steam, browse the internet,etc. I know its not ram as I just bought a new stick today which replaced my old ones and it runs fine in Safe mode. the first dump is with my old ram sticks the second is with my new ram stick ...
BSOD Help and Support
Random BSOD stop error 0x0000001E, hardware error?
Hello, A few days ago I got a random BSOD with the 0x0..1E stop error. Now my computer will rarely boot and when it does it still randomly gets the same BSOD. I once got a 1D stop error but its mostly 1E that keeps happening. I run Windows 7 Professional 64-bit and this time I used a Windows DVD...
BSOD Help and Support
always BSOD in normal boot
Hello and good day, my friends pc got this bsod crash everytime it boots. also the screen is filled with green thing all over,green lines (artifacts?) ive tried; 1. reinstalled drivers (graphics & network), 2. reinstalled OS (win7 ultimate sp1), 3. reset CMOS (reseat battery) but still the...
BSOD Help and Support
BSOD on Boot, only normal mode.
Quick Background: I just installed windows 7, and downloaded all of the updates, installed drivers from NVidia for my 560ti, and Steam, so I can begin downloading games. I reboot the computer into regular mode, and as stated above, BSOD. I succeed booting into safemode with networking, and am...
BSOD Help and Support
Normal Boot on windows 7 does not work correctly, no error message.
Hey there folks. I've been using the EAH5570 for a few months now, it's an excellent card for the price. But one day, after reinstalling the latest ATI Drivers (completely uninstalling everything first and clearing out the GAC files because I had the issue in which Catalyst Control Center...
Graphic Cards


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 10:29.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App