New
#1
Random BSOD over last few months, tried debug on my own w/o luck
ok, I am new to this forum and I am pretty frustrated with my desktop. Its one I built a couple years ago and its given me no problems...until the last few months. I had not (before it began happening) installed any new hardware to the system. It just would randomly blue screen. Some times I would get a few hours in, sometimes it would get as far as the desktop and go right into a BS. Really pretty random.
In the course of my troubleshooting, i ran memtest, which produced no errors. I have ran disk check, ran SFC, etc. I saw in my BIOS that my CPU temp was running a bit on the high side so I replaced my heat sink and put new thermal compound down. That helped my temps enormously but still getting random BS. I replaced the video card with a new one, I replaced the RAM with new...and it still occurs. Like I said though, absolutely random. I was just on the PC for two hours or so, walked away to shower, and came back to BS. This time i got a critiocal object termination error, which was new. Usually its a IRQ_NOT_LESS_OR_EQUAL error or a PAGE_FAULT_IN_NONPAGED_AREA or a KMODE_EXCEPTION_NOT_HANDLED error.
Anyways, I don't have it set to overwrite the dump files, since its seemingly different every time...
I attached my zip file, per the instructions (nice little program by the way, to whomever wrote that). I hope the upload of the file worked ok.
Any help you could give would be appreciated...