Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Computer Freezes/Lockups With Restart BCC 0X124

29 Jul 2013   #21
kevinbassist91

Windows 7 Professional X64
 
 

I received the new HDD and installed it today. I cloned the old HDD and copied it to the new HDD which is now configured as my boot drive. I'm not sure if the HDD is the issue as I am getting the same results from the old HDD. Here are a few screenshots regarding the new HDD.


My System SpecsSystem Spec
.
31 Jul 2013   #22
centaur78

Windows 7 ultimate x64
 
 

Kevin

The only way to read the SMART for both the drives is if the SMART is enabled in BIOS.

Please check to confirm that its enabled.

However based on what we have done here with the BIOS, and info from the dump files ... the finger points to the motherboard.... but before we get to that..... Post the latest BSOD dumps

Also it would be good to test the CPU / motherboard with IntelBurnTest and Prime95 before making a final call.
My System SpecsSystem Spec
31 Jul 2013   #23
kevinbassist91

Windows 7 Professional X64
 
 

SMART is enabled in the BIOS and I have run IntelBurnTest, here's a screenshot of the results based on the standard test at 5 runs. I'm running Prime95 right now for the next couple hours to see if that has any effect.
My System SpecsSystem Spec
.

01 Aug 2013   #24
kevinbassist91

Windows 7 Professional X64
 
 

I ran Prime95 for almost 24 hours and there was no shutdowns or reboots during that process. I would assume with that the CPU isn't the issue then. I'm leaning more towards the motherboard but I'll wait for the PC to generate another dump file but there hasnt been in over a week now.
My System SpecsSystem Spec
05 Aug 2013   #25
kevinbassist91

Windows 7 Professional X64
 
 

After waiting long enough I finally got a lock up and restart. Here is the dump file...
My System SpecsSystem Spec
05 Aug 2013   #26
centaur78

Windows 7 ultimate x64
 
 

were you doing something specific when it BSOD 'd ?


could you post the other files as well
My System SpecsSystem Spec
05 Aug 2013   #27
kevinbassist91

Windows 7 Professional X64
 
 

You want the other dump files again? Or do you want me to use the sevenforums tool to grab everything?
My System SpecsSystem Spec
06 Aug 2013   #28
centaur78

Windows 7 ultimate x64
 
 

Well kevin

To summarize.... I am leaning more towards the motherboard... here is why ...

the dump files does point to

Code:
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

Use !analyze -v to get detailed debugging information.

BugCheck 124, {0, fffffa800e9666b8, 0, 0}

Probably caused by : AuthenticAMD

Followup: MachineOwner
---------

0: kd> !analyze -v
*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

WHEA_UNCORRECTABLE_ERROR (124)
A fatal hardware error has occurred. Parameter 1 identifies the type of error
source that reported the error. Parameter 2 holds the address of the
WHEA_ERROR_RECORD structure that describes the error conditon.
Arguments:
Arg1: 0000000000000000, Machine Check Exception
Arg2: fffffa800e9666b8, Address of the WHEA_ERROR_RECORD structure.
Arg3: 0000000000000000, High order 32-bits of the MCi_STATUS value.
Arg4: 0000000000000000, Low order 32-bits of the MCi_STATUS value.

Debugging Details:
------------------


BUGCHECK_STR:  0x124_AuthenticAMD

CUSTOMER_CRASH_COUNT:  1

DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT

PROCESS_NAME:  System

CURRENT_IRQL:  0

STACK_TEXT:  
fffff880`03ba16f0 fffff800`03319ca9 : fffffa80`0e966690 fffffa80`0cb49040 00000000`0000000e 00000000`00000000 : nt!WheapCreateLiveTriageDump+0x6c
fffff880`03ba1c10 fffff800`031fae87 : fffffa80`0e966690 fffff800`032742d8 fffffa80`0cb49040 00000000`00000000 : nt!WheapCreateTriageDumpFromPreviousSession+0x49
fffff880`03ba1c40 fffff800`03162285 : fffff800`032d5ae0 00000000`00000001 fffffa80`0e7b87e0 fffffa80`0cb49040 : nt!WheapProcessWorkQueueItem+0x57
fffff880`03ba1c80 fffff800`030d8251 : fffff880`018e1e00 fffff800`03162260 fffffa80`0cb49000 060e0f08`0f0f0810 : nt!WheapWorkQueueWorkerRoutine+0x25
fffff880`03ba1cb0 fffff800`0336cede : 00000000`00000000 fffffa80`0cb49040 00000000`00000080 fffffa80`0ca9ab30 : nt!ExpWorkerThread+0x111
fffff880`03ba1d40 fffff800`030bf906 : fffff880`03964180 fffffa80`0cb49040 fffff880`0396efc0 00000000`00000000 : nt!PspSystemThreadStartup+0x5a
fffff880`03ba1d80 00000000`00000000 : fffff880`03ba2000 fffff880`03b9c000 fffff880`0381b740 00000000`00000000 : nt!KiStartSystemThread+0x16


STACK_COMMAND:  kb

FOLLOWUP_NAME:  MachineOwner

MODULE_NAME: AuthenticAMD

IMAGE_NAME:  AuthenticAMD

DEBUG_FLR_IMAGE_TIMESTAMP:  0

FAILURE_BUCKET_ID:  X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV

BUCKET_ID:  X64_0x124_AuthenticAMD_PROCESSOR_BUS_PRV

Followup: MachineOwner
---------

0: kd> !errrec fffffa800e9666b8
===============================================================================
Common Platform Error Record @ fffffa800e9666b8
-------------------------------------------------------------------------------
Record Id     : 01ce91f0256f6904
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 8/5/2013 15:26:41 (UTC)
Flags         : 0x00000002 PreviousError

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa800e966738
Section       @ fffffa800e966810
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : BUS error
Operation     : Generic
Flags         : 0x00
Level         : 3
CPU Version   : 0x0000000000100f43
Processor ID  : 0x0000000000000000

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa800e966780
Section       @ fffffa800e9668d0
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000000
CPU Id        : 43 0f 10 00 00 08 04 00 - 09 20 80 00 ff fb 8b 17
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ fffffa800e9668d0

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa800e9667c8
Section       @ fffffa800e966950
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
  Status      : 0xfa00000000070f0f
Which basically means that the processor bus is the cause of the problem... which would usually be caused when you are Overclocking or with high temperatures... but i can't find any sign's of them either in the logs or the dump files.... Also we did the Prime 95 and IntelBurn test...

Combined with the fact that the BIOS date are weird and plus the fact that windows was reinstall on a new drive and with WD and crystal disk showing that the SMART values cannot be read for both the HDD ... even though you have them enabled in BIOS...

Hence the fault all point to the motherboard... have it RMA'ed to HP for replacement.
My System SpecsSystem Spec
06 Aug 2013   #29
kevinbassist91

Windows 7 Professional X64
 
 

Hey,

Thanks for the information and to answer your previous question, it normally occurs when i resume use after its been sitting idle or when im simply browsing the internet. I do notice that the max temp for the CPU is 62C but even when I'm using the computer for simply browsing the CPU is operating at 42-43C. Also, I'm thinking of upgrading the Motherboard to a better one as I have purchased a new CPU case as well. So at this point I shouldn't continue to troubleshoot and just replace the Motherboard?

Thanks again.
My System SpecsSystem Spec
06 Aug 2013   #30
centaur78

Windows 7 ultimate x64
 
 

Well that would be the best way to go forward... since most of the components on your system has been upgraded...

However i would say you get the motherboard tested... or as a simple test... could you do a visual troubleshooting... look for bulged capacitors or any sign's of burnt component ??
My System SpecsSystem Spec
Reply

 Computer Freezes/Lockups With Restart BCC 0X124




Thread Tools




Similar help and support threads
Thread Forum
Computer Freezes And A black acreen after restart..
Hi guys.... My computer recently freezes.. then i Restarted it and The monitor just stayed black and the light gone from blue to orange.. Ive Tried... reseating RAM, Video cArd and hard disk... even tried cleaning it but... i recently cleaned it tried turning of for 30 minutes and turning...
General Discussion
lockups and freezes error-11
http://www.sevenforums.com/crashes-debugging/99812-lockups-freezes-bsod-event-error-11-a.html Basicly I have the same issue as this guy who posted here back in 2010. Certain games and programs will freeze for long periods of time for no reason, I have also had issues with downloading things from...
BSOD Help and Support
Random freezes/lockups
I've had this system working fine for a year or so bit it is causing problems for a while now and it is getting really on my nerves. So to jump right in these are my specs: Windows 7 home permium 64bit updated from vista Intel core i7 920 2.67Ghz 6MB RAM Nvidia GeForce GTX 275 Gigabyte...
BSOD Help and Support
Computer freezes and restart >.<
Hey, I've been having some problems with my computer recently. Pretty consistently it freezes and restart once every day. Usually happen within the first 2-3 hours of use, then doesn't happen again before I've shutdown and started up the computer again. First the screen freezes and 5-10 seconds...
BSOD Help and Support
Crashing/Lockups & restart in recovery mode
Hey All, I came across the BSOD Posting Instructions and thought it might help to post my issue here before sending this beast back for repair under warranty! Brand new Tecra M11-S3410, It's 32-bit Win 7. The OEM was XP Professional, but it shipped with a Windows 7 Professional recovery...
BSOD Help and Support
Lockups, Freezes, Hangs
Hi, I ran RC7100 since it was released. When I upgraded from 7000 to 7100 I ran into what appeared to be an ACPI issue, but on closer inspection turned out to be resolved early on by disabling my Belkin WiFi card. A while later my LAN Nic blew out so I reenabled the belkin wireless and the...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 17:40.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App