BSOD ntoskrnl.exe and dxgkrnl.sys related

Hey!

My computer is a custom built computer ordered form a website called "Komplett.se". I've had problems with BSOD from the day I bought this computer (ca. 3-4 years ago). The BSOD doesn't follow a certain pattern, in other words it sometimes occur when playing games (for instance League of Legends) and sometimes when browsing the web (currently I am using Google Chrome). Today (30th of November) the screen froze when I was browsing the web and after a few seconds a blue screen appeard saying something about "A clock interrupt was not recieved on a seconday processor within the allocated time interval.", see attachment bellow - this is not what normally happens. What usually happens is that screen freezes and then I hear this constant continous tone "BEEEEEEEEEEEEP!" which doesn't stop until the computer is shut down. I've done some research and found out that a cotnious beep means that something is wrong with the powersupply to the motherboard (not sure if this fact is true or false thou).

I've also had problem with not beeing able to wake my computer up from powersaving mode (if this is relevant), computer fans runs but nothing is displayed on my screen (using HDMI cable).

I've followed the guide on how to grab and attach all the necessary files and hopefully I have done it correctly. I have also attached a print screen from a program called "Bluescreen view" if it helps. Thanks in advance!

/Robin aka Hackerlacka

Hey, I am really sorry for my long inactivity. I really want to get this problem sorted out, so I have decided to follow the instructions you gave me in hope that someone will be willing into helping me further. I will post results soon.

YoYo155 said:

Welcome to SF, Hackerlacka :).
What is the make, model and age of your PSU?
Fill out this form and post back the result:

PSU: Chieftech - CFT - 650 - 14CS
My PSU is the same age as my computer which is approximate 3,5 years old.

The calculations showed: minimum PSU wattage: 472W, recomended PSU wattage: 522W

Note that I am not 100% sure that I filled in everything right.

More results coming soon

YoYo155 said:

Welcome to SF, Hackerlacka :).
Testing the RAM:

koolkat77 said:

Test and Diagnose RAM Issues with Memtest86+:

• RAM - Test with Memtest86+

   Tip

• Pay close attention to part 3 of the tutorial "If you have errors"
• Test the RAM with Memtest86+ for at least 7-10 passes. It may take up to 22 passes to find problems. Make sure to run it once after the system has been on for a few hours and is warm, and then also run it again when the system has been off for a few hours and is cold.

When done with the testing procedure take a picture and upload it here.

Memtest 86+ has been running for a couple of hours now whitout finding any problems

I just wanted to let you guys know that I have found the source to what's causing this problem. It turned out to be a faulty RAM-module. I simply tried each ram stick/module and set my computer in power saving mode and found the one that was causing the problem.

I've recently bought new RAM-modules and everything is working as intended. I still can't believe why I never tried this earlier, since I have had this problem for atleast 3,5 years now.

Thank you very much for all help