New
#1
Win 7 Pro - OK in safe mode, instant BSoD in Normal Start
Win 7 pro
Asrock w/AMD A6 w/GPU
Nothing external
SSD as boot
2 mirrored drives and an additional drive
Machine has been up and running for a long time.
I assume/figure that since it runs in safe mode that there is some sort of driver error. Unlike all the people that say 'I haven't changed a thing' I have changed something.
I took a PATA HD (20 years old) and used a SAbrent IDE > USB connector to attempt to get the data off the HD. It did not work. Device mgr does not install the connector as a device but it did install the HD in device manager. It did not work, I assume, because W7 cannot read the file system of the ancient drive.
PC seemed to work fine...I shut it down and unhooked the connector. Left it off because of thunderstorms.
Fired it back up and problems. At first I could boot up and it would work for a while.
I tried repair etc...and restoring but nothing is working.
I have looked in dev mgr and the drive is no longer there. I don't see any errors in dev mgr (in safe mode)
The stop error was 0x0000007E - I don't have any more information at this point.
Guess I should go read the sticky at the top of this sub-forum now Probably should be checking out the error file and posting it...