Windows 7 Forums

Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: BSOD Multiple types multiple times a day, can't pin down the problem

30 Oct 2014   #1
mmurray1988

Windows 7 Professional
 
 
BSOD Multiple types multiple times a day, can't pin down the problem

Hello everyone,

I came here once before for assistance, but the issue was unable to be resolved. Here is the link to the previous thread.

Several BSOD, no singular triggers

There is no singular trigger to set this off. Sometimes I can go hours without any issue, other times BSOD occurs in the middle of a reboot from another BSOD.

I appreciate any help given. Thanks.


My System SpecsSystem Spec
.
31 Oct 2014   #2
mmurray1988

Windows 7 Professional
 
 

Bump
My System SpecsSystem Spec
01 Nov 2014   #3
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Code:
fffff880`0945ccb8  fffff880`017a3431Unable to load image tmcomm.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for tmcomm.sys
*** ERROR: Module load completed but symbols could not be loaded for tmcomm.sys
 tmcomm+0x17431
Code:
fffff880`0b411e48  fffff880`01c9246dUnable to load image tmtdi.sys, Win32 error 0n2
*** WARNING: Unable to verify timestamp for tmtdi.sys
*** ERROR: Module load completed but symbols could not be loaded for tmtdi.sys
 tmtdi+0xc46d
Hi mmurray1988.

Uninstall Trend Micro. Using the Trend Micro Diagnostic Toolkit to uninstall the program | Trend Micro

Use Microsoft Security Essentials as your antivirus with windows inbuilt firewall, and free MBAM as the on demand scanner.

Download, install and update those, and then run full system scans with both of them, one by one.

Let us know for any further BSOD.
My System SpecsSystem Spec
.

01 Nov 2014   #4
mmurray1988

Windows 7 Professional
 
 

Hi Arc,

Thanks. I'm glad to have the help, especially from a fellow Final Fantasy VII fan. lol

I've uninstalled TM, installed MSE, and I'm now running a full scan.

As for MBAM, I had a previous version that I just updated, and it says the license is expired. Will that effect my scan?

Edit: I've also had a couple BSOD since posting. Should I clear my BSOD history as to avoid confusion for when new ones happens and I post the report?
My System SpecsSystem Spec
01 Nov 2014   #5
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by mmurray1988 View Post
Thanks. I'm glad to have the help, especially from a fellow Final Fantasy VII fan. lol
Cheers, mate!! Cloud FTW.

Quote   Quote: Originally Posted by mmurray1988 View Post
I've uninstalled TM, installed MSE, and I'm now running a full scan.
Good to know it.

Quote   Quote: Originally Posted by mmurray1988 View Post
As for MBAM, I had a previous version that I just updated, and it says the license is expired. Will that effect my scan?
If the license is expired, a program is not supposed to work as it should. If you dont want to renew the license, there is no problem (or any degradation of protection level) at all. Use the free version of MBAM.

MBAM is actually the industry leader in on demand scanning. The free version will perform it equally efficiently. As the real time protection that the paid version provides, MSE can take care of that side efficiently.

Let us know how it goes.
My System SpecsSystem Spec
01 Nov 2014   #6
mmurray1988

Windows 7 Professional
 
 

I'm working on performing a scan with MSE, but it keeps getting interrupted by BSOD. I'll keep trying, and hopefully my computer has one of its good streaks long enough to finish.
My System SpecsSystem Spec
01 Nov 2014   #7
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Quote   Quote: Originally Posted by mmurray1988 View Post
I'm working on performing a scan with MSE, but it keeps getting interrupted by BSOD.
Post the BSOD data?
My System SpecsSystem Spec
01 Nov 2014   #8
mmurray1988

Windows 7 Professional
 
 

My System SpecsSystem Spec
01 Nov 2014   #9
Arc

Microsoft Community Contributor Award Recipient

Microsoft Windows 10 Pro Insider Preview 64-bit
 
 

Free up the startup. Windows does not need any other program to auto start with it, but the auto start programs often conflicts and causes various problems including BSODs.
  1. Click on the Start button
  2. Type “msconfig (without quotes), click the resulting link. It will open the System Configuration window.
  3. Select the “Startup” tab.
  4. Deselect all items other than the antivirus.
  5. Apply > OK
  6. Accept then restart.
Now observe, if the BSOD continues?

If it does, Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest86+ for at least 8 consecutive passes.

If it start showing errors/red lines, stop testing. A single error is enough to determine that something is going bad there.

If it does not show any error, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

information   Information
Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

warning   Warning
Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip   Tip

Let us know the results, with the subsequent crash dumps, if any.
My System SpecsSystem Spec
01 Nov 2014   #10
mmurray1988

Windows 7 Professional
 
 

I finished a full scan with MSE and MBAM and both turned up clean.

I've also cleared up my start up to only include the anti virus.

Could that really of been the only issue?
My System SpecsSystem Spec
Reply

 BSOD Multiple types multiple times a day, can't pin down the problem




Thread Tools Search this Thread
Search this Thread:

Advanced Search




Similar help and support threads
Thread Forum
BSOD Multiple times multiple errors 0x0000001A
Last week I started receiving BSODs, and after the first one it got to the point where my computer was not booting up and my hard drive was beeping very angrily at me. I was not sure what all the problems were, however I also knew that there was something seriously wrong with my hard drive, so I...
BSOD Help and Support
BSOD becoming more frequent, multiple types
Hello you fine folk on the Seven forums. Assistance needed please! I'm running Windows 7 Home Premium 64-bit (version 6.1/Build 7601/Service Pack 1) on a Sony VAIO F-Series laptop. I have been experiencing BSODs since a few months after I bought it, though they only happened once every few...
BSOD Help and Support
BSOD errors. multiple times during multiple programs
windows 7 x64 - original install on system but i don't have my disks. they are somewhere... - full retail version installed - age of the system is approximately 3 years - age of the install is approximately 2 years it seems to happen at random but i get BSODs. approximately 2-3 times a day...
BSOD Help and Support
Multiple types of BSOD randomly
Hello, I've been having problems with my computer since I got it, a blue screen every once in a while and when it would get bad I would just reinstall my system and then it would be fine. But recently it's been really bad (5+ BSOD a day some times) and I can't find a way to fix it. Computer...
BSOD Help and Support
Multiple BSOD at Random Times with Multiple Drivers Identified
I am trying to get my wife's new computer up and running without any BSOD or program failures. Note that the system was not initially set up to capture the dmp files so all the earliest ones are missing. I presented the initial problems to the original seller who recommended sticking with MSE and...
BSOD Help and Support
BSOD - Multiple types, almost always just after login
Hi everyone, I've been having this problem for quite some time now. On most start ups (I'd probably go with 75%) I'll get a bluescreen somewhere between 10 seconds - 1 minute of signing into the computer. However once it breaks past this barrier it usually runs perfectly fine (including...
BSOD Help and Support


Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 07:27.

Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App