Windows 7 Forums
Welcome to Windows 7 Forums. Our forum is dedicated to helping you find support and solutions for any problems regarding your Windows 7 PC be it Dell, HP, Acer, Asus or a custom build. We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks.


Windows 7: Windows 7 Install No HDD's


30 Nov 2010   #1
evocube

windows 7 prem. home x64
 
 
Windows 7 Install No HDD's

Getting really Frustrated with this. First off I have an Asus CM5570 AP006 with Intel Dual Core 2.3 GHZ 6 Gigs of Ram and Nvidia GT100.

I am trying to install win7 to a new hard drive after a reboot would not see my original hard drive. Figured the drive was toast (no big deal have most of the data readily backed up). So i buy a new WD 320 Gig HD. toss it in go to do a clean install of win 7 cannot find HDD for install.
Steps:
1. Swapped Cable - Didnt work
2. Swapped ports - Tried all 6 didnt work
3. Loaded Manufactured Drivers - Tried all compatiable at win 7 setup
4. Flashed bios - No difference
5. Tried IDE (compatible and Enhanced), AHCI through bios.
6. UBCD Tested all harddrives (including one i htought was toast) All tested good per manufactures tools and SMART.
7.Called ASUS - Great Hardware and Customer service is a joke on the prebuilt computer side.
(Edit) Also parted and formatted and flag for boot the new HD with gparted on UBCD. - Didnt work as well


So here I am now. LOL. I have pretty much over done everything here. But I do not get how I can boot into a LIVE UBCD system and everything works fine and I cannot even install or repair a win 7 install.

Please help. I am not sure what I am missing and I have I guess became to old to work on the new stuff LOL.

Thanks for the help in advance.


My System SpecsSystem Spec
.

30 Nov 2010   #2
mborner

Windows 7 Pro/32 Academic. Build 7600
 
 

Windows can't find the HDD because it is trying to boot to a new, non formatted drive. You need to go into your BIOS and change the boot order and make sure that the DVD ROM is the first drive to boot. Then, restart the PC (with the Windows DVD in the drive) When the message "press any key to boot from CD" appears, do just that, and continue with the install.
My System SpecsSystem Spec
30 Nov 2010   #3
evocube

windows 7 prem. home x64
 
 

Yeh I can get the DVD's to boot. I actually forgot to say I messed with the boot order as well. I get to the windows 7 install. Pick custom install. Clean install..... Just no HD to install to. I have also tried this with an unformatted unparted drive.
My System SpecsSystem Spec
.


30 Nov 2010   #4
kword88

windows 7 ultimate 64bit
 
 

i think you need to load the SATA driver during windows installation. it may be available as a standalone driver or as part of the chipset driver package. you should be able to download it from either asus or intel. you will need all the extracted files, not the ".exe" file (although if that is the only one available, there is a utility you can use to extract the files from it). then either burn the files to a disc, or put them on a usb flash drive, so you can load them during installation.
My System SpecsSystem Spec
30 Nov 2010   #5
evocube

windows 7 prem. home x64
 
 

Absolutely. That was the first place I went downloaded and extracted the drivers put them on an external USB HD (which yes oddly did work) loaded the drivers during Win7 install. All chipset drivers relating to SATA, AHCI, and IDE that i downloaded from Asus for my computer model and motherboardand operating system. But to No Avail still not seeing hard drives. I am about to go office space on this computer .

I have tried this on both the old and new HDD's in all configurations (AHCI, EIDE, and Comp IDE). With only the HDD and DVD Hooked up (not both HDD's).
My System SpecsSystem Spec
30 Nov 2010   #6
kword88

windows 7 ultimate 64bit
 
 

each time i format and reinstall i have to load the SATA driver first, BUT i have to UN-check the box next to "show only compatible drivers". then, through trial and error, i located a working driver. and on my asus board, i had to disable RAID in the BIOS.
My System SpecsSystem Spec
30 Nov 2010   #7
evocube

windows 7 prem. home x64
 
 

OK. I was going to go there but I am just floored that i can load everything on UBCD just fine and see and mount all drives with not issues.
I will try that though there are tons of drivers on this thing. Did you use ASUS drivers or Intel drivers?

not sure but how does this work to find the drive? Solved Hard Drive - Unable to Select or Delete during Installation - Vista Forums
My System SpecsSystem Spec
30 Nov 2010   #8
kword88

windows 7 ultimate 64bit
 
 

i used drivers from intel.

take a look at this tutorial. i'm not sure if it will help, since your hdd is awol: SSD / HDD : Optimize for Windows Reinstallation
My System SpecsSystem Spec
30 Nov 2010   #9
evocube

windows 7 prem. home x64
 
 

Well I guess I will try some random drivers tonight from intel. Wish i could get to the recovery partition on the original hard drive.

Any ideas on recovering the boot sector on an HDD windows cannot see?
My System SpecsSystem Spec
30 Nov 2010   #10
gregrocker
Microsoft MVP

 

WIpe the boot sector of all code using Diskpart or free Partition Wizard bootable CD.

It's possible that if the installer can't see your HD then Diskpart might not see it either when booting into DVD Command Line by pressing Shift F10 at first screen: Disk - Clean and Clean All with Diskpart Command

If not then use PW boot CD which will see the HD if BIOS does: http://www.partitionwizard.com/download.html Choose Wipe Disk on Disk tab.
My System SpecsSystem Spec
Reply

 Windows 7 Install No HDD's




Thread Tools




Our Sites

Site Links

About Us

Find Us

Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

Designer Media Ltd

All times are GMT -5. The time now is 06:17 AM.
Twitter Facebook Google+



Windows 7 Forums

Seven Forums Android App Seven Forums IOS App