New
#11
"page fault in non-paged area" errors need patience to solve. Try the following steps: –
Reseat all your RAM sticks as well as your video cards.
Run memtest to thoroughly check your RAM sticks. (RAM problems are high on the list of hardware issues that cause your error).
Try different combinations of two or four sticks if errors occur during testing. Make sure your DRAM voltage is set to manufacturer specs.
If the RAM checks out, uninstall the last software/driver installed prior to the first occurrence of the error.
Do all testing after disconnecting all external peripherals (external hard drives and printers etc.)
"0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online MSDN article.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card)"
Best of luck and be patient.