New
#21
Hi DaveThere are three tests posted, which ones did you run and what were the results?
Sorry not sure exactly what results your looking for??
I ran all 3 Prime95 tests and there were no failures - max temp 84*C
I ran the memtest for 9 passses and no errors were reported
I ran the Seatools short and long tests with it passing both tests
I am not aware of, however is there some specific report i am supposed to output from some of these tests that will tell you more?
Are you suggesting this could be the cause of my problems or is it just somethingA stock Intel CPU cooler should run Prime95 at or below 68°C.
that needs to be attended to?
I went in to the bios and the only voltage references i could find were under the OC Tweaker tabGo to your BIOS and tell us what the CPU, RAM and the CPU integrated memory controller voltages are.
With two 4GB RAM cards installed I would bump the CPU integrated memory controller voltage.
Default setting is 1.10v, bump it to 1.15v (or 1.170v if the 1.150v option is not available).
They were CPU, DRAM, VIT, PCH and GFX voltages. They were all set to Auto.
Are these what you are refering to?
I will check the seating of the cooler and get back to you
Thanks
Greg
Last edited by grego99; 12 May 2011 at 18:48.