New
#11
Deleted
Last edited by AvalonBright; 05 Sep 2016 at 20:53.
How long did verifier run for before you quit?
....Reboot the system and wait for it to crash to the Blue Screen. Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).
Experienced the same problem since months as n number of BSOD's caused by NTOSKERNEL.EXE every time with a new error defined before restarting the machine.
Windows 7 Ultimate SP1 X64
Windows 10 Pro X64
Both versions of windows OS experienced the same concern as formatting the entire HDD was the last option to resolve the glitch BUT the issue was related to the threading & processing of the CPU installed on the board.
Intel DH55TC , Intel i3 2.99Ghz Second Gen , 8 GB DDR3 RAM 1666 Mhz
Hence what you need to do is very simple. Just follow the steps :-
1. Boot into BIOS setup via F2/DEL key.
2. Toggle to EXIT tab with the help of ARROW KEYS.
3. Highlight "LOAD OPTIMAL DEFAULTS/LOAD SETUP DEFAULTS/LOAD FACTORY DEFAULTS" with ARROW KEYS.
4. Hit ENTER KEY than YES/OK to proceed.
5. Hit F10 to save the current settings than YES/OK to proceed.
Note :- After restarting the machine REMOVE all third party software & applications. Run Malware Bytes scan & remove threats if you don't have a LICENSED ANTI-VIRUS.
Hope this helps...In case of any query reply back to me for better assistance.
CHEERS...!!