BSOD IRQL not less or equal & system service

Lets enable driver verifier to rule out buggy drivers.

• Driver Verifier - Enable and Disable

Information
Driver Verifier runs in the background, "testing" drivers for bugs. If it finds one, a Blue Screen of Death (BSOD) will result; the corresponding dump file will hopefully show the faulty driver.

Capt.Jack Sparrow said:

Driver Verifier monitors kernel-mode drivers and graphics drivers to detect illegal function calls or actions that might corrupt the system. It can subject the drivers to a variety of stresses and tests to find improper behavior.

Continue to use your system normally, and if you know what causes the crash, do that repeatedly. The objective here is to get the system to crash because Driver Verifier is stressing the drivers out. If it doesn't crash for you, then let it run for at least 36 hours of continuous operation.

Get an update for this driver
Source HECIx64.sys
Intel Management Engine Interface http://downloadcenter.intel.com/Default.aspx

Code:

2: kd> lmvm HECIx64
start             end                 module name
fffff880`04000000 fffff880`04011000   HECIx64  T (no symbols)           
    Loaded symbol image file: HECIx64.sys
    Image path: \SystemRoot\system32\DRIVERS\HECIx64.sys
    Image name: HECIx64.sys
    Timestamp:        Tue Sep 21 22:59:04 2010 (4C98E458)
    CheckSum:         000128C2
    ImageSize:        00011000
    Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

Let us know if you're getting more BSODs

Hi

Is any of your hardware overclocked?

And you may please disable driver verifier now. It's not providing any useful information but just blaming windows files.

I re-read the entire thread again and need to know, did you guys plug-in all the stuffs correctly after moving to your bfs? Did you recheck for any lose connections?

ok..
did you disable driver verifier?

Lets do some tests.


To make sure that hard drive is good run disk check following the tutorials:

• Disk Check

Hard drive scan usings SeaTools:

• SeaTools | Seagate both long and short tests.

You should run memtest86+ on each stick for 8 passes preferably overnight:

• RAM - Test with Memtest86+

Post back your results after doing these