New
#11
They're physically separate, I used the basic test.
They're physically separate, I used the basic test.
Was it the Basic Long test? Have you tried disconnecting the drives with Caution and see what happens?
Yes I have taken out all drives but the primary that is a PCI-E SDD hybrid, and ran the same conditions that gave me the BSOD, and I got it again. At that point I took out the PCI-E SDD hybrid and setup windows on one of my other Hard drives and ran the same conditions that gave me the BSOD and still got the BSOD
Hi,
That probably rules out the HDD/SSD, but I would wait for more experienced analysts to confirm/refute that.
I know you have already ran Prime95 to test the CPU, but I wonder if you wouldn't mind also running IntelBurnTest - its a shorter test but does stress the CPU significantly. Please do that using this tutorial, watch the temperatures closely, and post a screen capture of the test screen when it finishes:
CPU - Stress Test Using IntelBurnTest
I think you should also stress the video card using this, and report the outcome:
Video Card - Stress Test with Furmark
I may have missed it, but are you overclocking any of the components? If so, please revert to the stock settings for the time being.
Regards,
Golden
my max temp for my CPU is 62c when it was idle I was running at 62c min 60.5c max 63.4c when I ran the standard test it was at 80c before it BSOD and i'm not OC, so now I have found the problem, the heatsink is clear of dust, so I guess I need a new cpu
Computer BSOD in the middle of standard test, I was watching the temp it was at 80c when the comp crashed
OK. Have you checked the thermal paste between the CPU and fan? It might be as simple as remounting the fan with new thermal paste.
I haven't check it, I might have some paste around the house if not, I don't want to take the heatsink off with out replacement paste which I wont be able to get until monday
I found some Arctic Silver and removed the Heatsink and couldn't believe what I saw, there was nothing left but the outline where the pre-applied paste use to be, started the comp up and it running at 30c to 35c idle render the video with out breaking 50c. I can't that this was so simple, thanks so much for your help :), that will teach me for using generic paste