New
#1
BSOD Working on Autocad, error 0x000000d1
Hi,
I'm facing an issue on my machine it's BSOD and i think the reason is the network adapter driver,
I have updated the driver from Intel.com,
since then the crash started to happen daily instead of each three/two days.
here is the details of the crash:
=======================================================================
windows version: Windows 7 Service Pack 1, 6.1, build: 7601
windows dir: C:\Windows
CPU: AuthenticAMD AMD Phenom(tm) II X6 1090T Processor AMD586, level: 16
6 logical processors, active mask: 63
RAM: 17170178048 total
VM: 2147352576, free: 1908269056
On Tue 3/12/2013 9:25:57 AM GMT your computer crashed
crash dump file: C:\Windows\Minidump\031213-12355-01.dmp
This was probably caused by the following module: e1q62x64.sys (0xFFFFF88002F7BDF4)
Bugcheck code: 0xD1 (0xFFFFFA802B400000, 0x2, 0x0, 0xFFFFF88002F7BDF4)
Error: DRIVER_IRQL_NOT_LESS_OR_EQUAL
file path: C:\Windows\system32\drivers\e1q62x64.sys
product: Intel(R) Gigabit Adapter
company: Intel Corporation
description: Intel(R) Gigabit Adapter NDIS 6.x driver
Bug check description: This indicates that a kernel-mode driver attempted to access pageable memory at a process IRQL that was too high.
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: e1q62x64.sys (Intel(R) Gigabit Adapter NDIS 6.x driver, Intel Corporation).
=========================================================================
I've attached the SF Log file.
Thanks in advance.