Got BSOD Razer Blade 1st Gen

It may. It seems you have a problem with sleep on your laptop, not just the USB ports. Try the advanced power options and see if it helps. Click the start button, type power options in the search box, click on the power options entry that appears. You should get a screen where you tell the computer when to sleep. below that click where it says change advanced power settings. You should get a screen of advanced power settings, Click on USB, then click on selective suspend and change the value to disabled. That setting allows your computer to put unused USB ports to sleep or turn them off when not in use to save power. Not turning them off may solve your problem but could affect the battery life of the laptop too. You may not be able to run as long on a battery charge as normal.

Yes, USB is what I meant, it was a typo. Fixed now.Sorry it didn't work and I really have no other solutions other than trying the link I gave you. What seems to be happening is when you start your computer, it loads all drivers. When you wake up from sleep, that driver does not wake up. So, when you restart, it works again because it is reloaded. You may look in bios and see if there are settings that will help under USB or Sleep options. You may look at this and see if it will help. Read some of the comments too. Devices - Allow or Prevent to Wake Up Computer

Also you may disable USB Selective Suspend.

• USB Selective Suspend - Turn On or Off

After disabling it, put the laptop in sleep and observe if it is behaving the same or not.

That's great. I'm glad you have it working the way it should be. Good job.