It's fine Dsprague, it's a OEM System Builder key.
Let's begin the analysis:
Code:
BugCheck FE, {8, 6, 5, fffffa8008775000}
Probably caused by : usbhub.sys ( usbhub!UsbhHubProcessChangeWorker+ec )
Code:
Usual causes: USB device driver
This bugcheck indicates that a error occurred within the USB driver. It appears that there may be some issues caused by USB Suspension.
Code:
Arg1: 0000000000000008, USBBUGCODE_RESERVED_USBHUB
Arg2: 0000000000000006, USBHUB_TRAP_FATAL_TIMEOUT
Arg3: 0000000000000005, TimeoutCode: Timeout_PCE_Suspend_Action3 - PortData->PortSuspendEvent
Arg4: fffffa8008775000, TimeoutContext - PortData
Update BIOS:
Code:
American Megatrends Inc. 0302, 26/02/2009
Code:
2: kd> !sysinfo machineid
Machine ID Information [From Smbios 2.5, DMIVersion 37, Size=3016]
BiosMajorRelease = 8
BiosMinorRelease = 15
BiosVendor = American Megatrends Inc.
BiosVersion = 0302
BiosReleaseDate = 02/26/2009
SystemManufacturer = System manufacturer
SystemProductName = System Product Name
SystemFamily = To Be Filled By O.E.M.
SystemVersion = System Version
SystemSKU = To Be Filled By O.E.M.
BaseBoardManufacturer = ASUSTeK Computer INC.
BaseBoardProduct = P6T DELUXE V2
BaseBoardVersion = Rev 1.xx
Remove (at least to test):
Code:
Start Menu\Programs\BUFFALO\TurboUSB
Start Menu\Programs\BUFFALO
These performance programs usually tend to cause problems. Remove using - Revo Uninstaller Pro - Uninstall Software, Remove Programs easily, Forced Uninstall, Leftovers Uninstaller
No active security protection?
Install and perform full scans with:
Information
Remember to install the free version of Malwarebytes not the free trail; untick the free trial box during installation. MSE is the most lightweight and compatible with the Windows 7 operating system
You can also view this thread for a complete free and lightweight security protection combination:
There's seems to be a issue with some of the USB drivers, follow these steps:
- Start
- Type: Device Manager
- Expand USB Controllers
- Uninstall driver (for every listed device)
- Reboot
The drivers should now be automatically reconfigured by Windows upon reboot.
If you are using any USB devices, then remove these from the USB ports (leave keyboard and mouse), and then update all the devices with the latest drivers, including the mouse and keyboard if applicable.
Turn off USB Suspension: