Random BSOD's, mainly ntoskrnl.exe but also other errors.

Page 8 of 13 FirstFirst ... 678910 ... LastLast
  1.    #71

    Code:
    BugCheck FC, {fffff88005190410, 80000001998da963, fffff880027ec700, 2}
    
    Probably caused by : dxgmms1.sys ( dxgmms1!VIDMM_GLOBAL::EndPreparation+1a3 )
    Code:
    Usual causes:  Device driver
    Code:
    2: kd> lmvm atikmdag
    start             end                 module name
    fffff880`0566d000 fffff880`061e0000   atikmdag T (no symbols)           
        Loaded symbol image file: atikmdag.sys
        Image path: \SystemRoot\system32\DRIVERS\atikmdag.sys
        Image name: atikmdag.sys
        Timestamp:        Fri Mar 29 02:27:04 2013 (5154FBF8)
        CheckSum:         00B25604
        ImageSize:        00B73000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Your AMD/ATI graphics card driver seems to be a possible cause, please update to the latest WHQL from here - AMD Graphics Drivers & Software

    WHQL
    Release Date: April 24th 2013
    Version: 13.4
    In Device Manager: 12.104
      My Computer

  2.    #72

    From a Stop 0xA:

    Code:
    2: kd> lmvm nvstor
    start             end                 module name
    fffff880`010b3000 fffff880`010de000   nvstor   T (no symbols)           
        Loaded symbol image file: nvstor.sys
        Image path: \SystemRoot\system32\drivers\nvstor.sys
        Image name: nvstor.sys
        Timestamp:        Fri Mar 19 20:45:11 2010 (4BA3E257)
        CheckSum:         000291A5
        ImageSize:        0002B000
        Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4
    Your nVidia Storage driver seems to be causing problems, it's most likely to be part of the chipset, check your motherboard's support page for a chipset update or check for updates from here - Drivers - Download NVIDIA Drivers
      My Computer


  3. Posts : 66
    Windows 7 Home Premium x64
    Thread Starter
       #73

    I'm doing the stress test right now.

    Yes I've installed all important and optional updates via windows update.

    I've attached a screen shot of my device manager where it says the driver version of my graphics card. To me it seems that it is the latest version already.
      My Computer


  4. Posts : 3,056
    Windows 10
       #74

    A few I am seeing are:

    Code:
    ASACPI.sys   Mon Mar 28 05:30:36 2005
    atikmpag.sys Fri Mar 29 04:09:45 2013
    • Catalyst Control Center 13.4



    x BlueRobot, you're too fast!

    Last edited by YoYo155; 12 Aug 2013 at 17:42. Reason: beaten to the punch.
      My Computer


  5. Posts : 3,056
    Windows 10
       #75

    Kreshnak said:
    I'm doing the stress test right now.

    Yes I've installed all important and optional updates via windows update.

    I've attached a screen shot of my device manager where it says the driver version of my graphics card. To me it seems that it is the latest version already.
    CCC 13.4 was proven to be buggy in the past.

    Uninstall the driver using AMD Catalyst Un-install Utility.
    Then follow through with a pass of Driver Sweeper.

    Important!

    • When installing, do not install Catalyst Control Center !
    • Choose to install the Display Driver only.

    Download and install revision number 13.1
      My Computer


  6. Posts : 66
    Windows 7 Home Premium x64
    Thread Starter
       #76

    I'm on it, as soon as I've left my stress test on for two hours. It's been on for half an hour now and haven't had an error yet.
      My Computer


  7. Posts : 26,869
    Windows 11 Pro
       #77

    When you are running Prime95, be sure to keep a close check on your CPU temps. prime will make them go up extremely high. If you get close to a critical temp, shut the test down. prime is designed to test the CPU among other things. A bad CPU is probably the least likely problem you could have. They do go bad, but rarely. I tend to agree with Greg Rocker. If you run pretty stable in Safe mode, it sounds more like a driver.

    When you updated BIOS, did you go back into bios and set it to optimized defaults, reset the ram to manufacturer's specs, and set the sata controller? As I recall, the last time you did that it helped your stability.
      My Computer


  8. Posts : 66
    Windows 7 Home Premium x64
    Thread Starter
       #78

    How high is a critical temp? The CPU is at 74°C atm.

    I don't remember if I did that, can check as soon as the stress test is done though.
      My Computer


  9. Posts : 26,869
    Windows 11 Pro
       #79

    If you can download and install Core Temp it will tell you your TJ Max, (the temp you are reading now) for your CPU. TJ Max is the maximum temp of the cores.
      My Computer


  10. Posts : 66
    Windows 7 Home Premium x64
    Thread Starter
       #80

    The stress test went for 2h+ error free. Downloading the 13.1 AMD Driver. Installed the new nVidia drivers.

    As far as I could see the Bios was set to optimized defaults. Everything was set on "auto" concerning memory.
      My Computer


 
Page 8 of 13 FirstFirst ... 678910 ... LastLast

  Related Discussions
Our Sites
Site Links
About Us
Windows 7 Forums is an independent web site and has not been authorized, sponsored, or otherwise approved by Microsoft Corporation. "Windows 7" and related materials are trademarks of Microsoft Corp.

© Designer Media Ltd
All times are GMT -5. The time now is 16:23.
Find Us