BSOD occurring randomly and frequently in past 2 days.

daxter · Sep 13, 2013

I had posted on this forum about 2 months ago and got my BSOD problem fixed that time,
After that, I got 1 BSOD after 2 weeks I guess, but then nothing again until 2 days ago

I ignored it that time but then it happened twice yesterday
and today it happened twice as well

I don't think I installed any new software lately, so I don't have an idea what might be causing it.
Any help welcome

Arc · Sep 13, 2013

Code:

*******************************************************************************
*                                                                             *
*                        Bugcheck Analysis                                    *
*                                                                             *
*******************************************************************************

CRITICAL_STRUCTURE_CORRUPTION (109)
This bugcheck is generated when the kernel detects that critical kernel code or
data have been corrupted. There are generally three causes for a corruption:
1) A driver has inadvertently or deliberately modified critical kernel code
 or data. See http://www.microsoft.com/whdc/driver/kernel/64bitPatching.mspx
2) A developer attempted to set a normal kernel breakpoint using a kernel
 debugger that was not attached when the system was booted. Normal breakpoints,
 "bp", can only be set if the debugger is attached at boot time. Hardware
 breakpoints, "ba", can be set at any time.
3) A hardware corruption occurred, e.g. failing RAM holding kernel code or data.
Arguments:
Arg1: a3a039d8a2d496fd, Reserved
Arg2: b3b7465ef552d2df, Reserved
Arg3: fffff88003970640, Failure type dependent information
Arg4: 0000000000000003, Type of corrupted region, can be
    0 : A generic data region
    1 : Modification of a function or .pdata
    2 : A processor IDT
    3 : A processor GDT
    4 : Type 1 process list corruption
    5 : Type 2 process list corruption
    6 : Debug routine modification
    7 : Critical MSR modification

Test your RAM modules for possible errors.
How to Test and Diagnose RAM Issues with Memtest86+
Run memtest for at least 8 passes, preferably overnight.

Stress test the Graphics Card using Furmark.
Video Card - Stress Test with Furmark

Stress test the CPU.
Hardware - Stress Test With Prime95

If those tests comes back as free from errors, enable Driver Verifier to monitor the drivers.
Driver Verifier - Enable and Disable
Run Driver Verifier for 24 hours or the occurrence of the next crash, whichever is earlier.

Information

Why Driver Verifier:
It puts a stress on the drivers, ans so it makes the unstable drivers crash. Hopefully the driver that crashes is recorded in the memory dump.

How Can we know that DV is enabled:
It will make the system bit of slow, laggy.

Warning

Before enabling DV, make it sure that you have earlier System restore points made in your computer. You can check it easily by using CCleaner looking at Tools > System Restore.

If there is no points, make a System Restore Point manually before enabling DV.

Tip

If you fail to get on the Desktop because of DV, Boot into Advanced Boot Options > Safe mode. Disable DV there. Now boot normally again, and try following the instruction of enabling DV again.
If you cannot boot in Safe mode too, do a System Restore to a point you made earlier.

Let us know the results, with the subsequent crash dumps, if any. Post it following the Blue Screen of Death (BSOD) Posting Instructions.

BSOD occurring randomly and frequently in past 2 days.

daxter

New member

My Computer

At a glance

Arc

New member

My Computer

At a glance

Similar threads

BSOD occurring randomly and frequently in past 2 days.

daxter

New member

My Computer My Computer

At a glance

Arc

New member

My Computer My Computer

At a glance

Similar threads

My Computer

My Computer