New
#1
BSOD installing Windows 7 raid0, numerous error codes
Hello Everyone,
This is my first attempt at installing windows on a raid configured rig.
I'm having a bit of trouble installing windows onto my new rig. I keeping getting BSOD's after completing the starting windows screen of entering setup. The STOP: error's are varied from hardware error's, driver error's, to memory error's (there are so many I can't remember them all).
The raid is setup using the intel x79 sata port chipset on mobo.
Trying install windows using the standard cd method.
Diagnosing preformed so far:
used ultimate boot cd to run full diagnostics on memory and the individual hdd's no error's
tried different sata ports for the hdd's
placed Intel RST driver on a flash drive while trying to install windows
created custom install disc with mobo raid drivers placed into windows using RT7... no joy
Removed the raid setup and tried installing directly to one of the drives..... no joy
any help would be appreciated.
P.S. can't put memory dumps nor any other diagnostic stuff because windows is not installed yet. So putting the obligatory Posting Instructions with out reading is just trolling.
Last edited by ValhallaJC; 20 Nov 2013 at 20:39.