New
#21
toranaboy, I'm not sure what you mean by your post is gone. I can see all 20 posts in this thread. My experience is, that when you have a lot of BSODs and all different drivers and all different codes, there I something else going on , and the dump files are blaming everything else. We can test almost every component except the PSU and the Motherboard itself. We diagnose those as nothing else is wrong, so it gas to be one of those. Kind of the process of elimination. Personally, I hope memtest86+ fails. That would be the easiest and cheapest solution for you.
The sfc not passing makes it kind of bad for you. That is a system file checker that checks protected system files and attempts to fix them. Can you tell me what it did? did it not run at all or did it run and say there were errors it couldn't fix? Also, are you having problems with USB devices and no graphics adapter? Perhaps those are driver issues, what dies Device manager say when you expand graphics adapters? If you need drivers, you can download them from ASRock > B75 Pro3-M Just select your OS. Also, how old is your Son? Kids sometimes don't realize what's really going on and download stuff they want and pay no attention to where they're downloading it from. I would suggest you run a few virus scans such as the free Malwarebytes and eset online scanner. My Sister has this problem all the time, because she lets her grandchildren use her computer. They download innocent stuff, but from the wrong places and ends up with so many viruses and junkware that it's almost impossible to get rid of them all. If you want, I can get you a few links to run virus scans, I'll also post some instructions to run memtest86+, in case I haven't already. But when you run it, you can stop it if you get even 1 error. That's a fail and no reason to continue, it's a waste of time.
Please Run Memtest86+
InformationPlease download from this site only http://www.memtest.org/ in the middle of the page are the Download links, you can download the ISO.zip or the Auto USB Flash Drive installer.zip
Extract the Zip file. If you chose the ISO image, burn it to a CD using Windows Disk Image Burner or any Image burner you mat have. If you downloaded the Auto USB installer, extract it, insert your USB 2.0 Flash Drive and take note of the drive letter. Run the installer, select the Flash Drive Letter, check the format box and press next. It will install memtest86+ to a flash drive. You can use either V4.20 or V5.01. Boot from your selected media. If you use V5.01 it will tell you to press certain buttons at the start, please press no buttons. The test will begin on it's own and continue to run until you stop it. It needs to run for 8 complete passes or until you receive an error. If you receive an error, stop the test. Even 1 error is a fail. Each pass tests a different part of the ram and each of the 10 tests in each pass tests something different. It takes a minimum of 8 passes to completely test the ram, more passes are better. It is quite a long test and will take several hours depending on how much ram you have. Due to the time length it is best to run overnight. If you have any questions, please do not hesitate to ask