BSOD while playing Metal Gear Solid V TPP or BF4, ntoskrnl.exe.

Hornet07 · 26 Oct 2015

axe0 said:

Take the time you need, there is no rush :)

I have ran the MemTest86+ for 8 passes and there were 0 Errors.

I am attaching a DM Log as well.

Hornet.

**axe0** · 26 Oct 2015

Has there been a new BSOD?
If not, then uploading a new zip file wasn't needed

Hornet07 · 26 Oct 2015

axe0 said:

Has there been a new BSOD?
If not, then uploading a new zip file wasn't needed

I haven't tested yet since the MemTest took like 16 hours to do and I will be away, I will try playing MGS when I come back and I will report back.

Hornet07 · 27 Oct 2015

axe0 said:

Has there been a new BSOD?
If not, then uploading a new zip file wasn't needed

It happened again but I think it might be due to overheating, but when I touch the case it isn't that hot either and I monitor the Temp and it was 70C+ for GPU and CPU.

**axe0** · 27 Oct 2015

It seems there is too much delay between data in a bus, I should say that there was no reaction at all from a response.
Yet this information is not enough to be specific as it could be caused by hardware and drivers.
Please check your BIOS for the voltage and frequency of the RAM and verify they are supported by the motherboard.
That should rule out the memory completely.

Code:

5: kd> !errrec fffffa8007ab28f8
===============================================================================
Common Platform Error Record @ fffffa8007ab28f8
-------------------------------------------------------------------------------
Record Id     : 01d110a97f2b69a9
Severity      : Fatal (1)
Length        : 928
Creator       : Microsoft
Notify Type   : Machine Check Exception
Timestamp     : 10/27/2015 11:20:42 (UTC)
Flags         : 0x00000002 PreviousError

===============================================================================
Section 0     : Processor Generic
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ab2978
Section       @ fffffa8007ab2a50
Offset        : 344
Length        : 192
Flags         : 0x00000001 Primary
Severity      : Fatal

Proc. Type    : x86/x64
Instr. Set    : x64
Error Type    : BUS error
Operation     : Generic
Flags         : 0x00
Level         : 3
CPU Version   : 0x0000000000600f20
Processor ID  : 0x0000000000000000

===============================================================================
Section 1     : x86/x64 Processor Specific
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ab29c0
Section       @ fffffa8007ab2b10
Offset        : 536
Length        : 128
Flags         : 0x00000000
Severity      : Fatal

Local APIC Id : 0x0000000000000000
CPU Id        : 20 0f 60 00 00 08 06 00 - 0b 32 98 3e ff fb 8b 17
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00
                00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00

Proc. Info 0  @ fffffa8007ab2b10

===============================================================================
Section 2     : x86/x64 MCA
-------------------------------------------------------------------------------
Descriptor    @ fffffa8007ab2a08
Section       @ fffffa8007ab2b90
Offset        : 664
Length        : 264
Flags         : 0x00000000
Severity      : Fatal

Error         : BUSLG_GENERIC_ERR_*_TIMEOUT_ERR (Proc 0 Bank 4)
  Status      : 0xfe00000000070f0f
  Address     : 0x000000019876e090
  Misc.       : 0xc00a0fff01000000

Hornet07 · 27 Oct 2015

I will do that at friday since i'm gonna be changing the thermal paste. I will report back asap. But again thanks for the help.

**axe0** · 27 Oct 2015

Be sure to check the heatsink and fans too for cleaning :)

Hornet07 · 29 Oct 2015

axe0 said:

Be sure to check the heatsink and fans too for cleaning :)

I have found that the Voltage of the DDR3 is 1.500 V and the Frequency is x6.66 1333 Mhz and that the motherboard supports them.

Hornet07 · 29 Oct 2015

BSOD while playing BF4, after such an awesome kill.

I think my computer can't handle this awesomeness

but anyway I'm attaching a DM Log.

**axe0** · 29 Oct 2015

STOP 0x124 Troubleshooting

Read carefully before proceeding.

Warning

If you're overclocking your system, revert back to stock clocks now.

Note

Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: Hard Drive Diagnostics
Part Three: GPU Stress Test

ONE

CPU TEST

Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 7 Help Forums

Warning

Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.

TWO

HDD TEST

Run SeaTools to check the integrity of your HDD. SeaTools - HDD test - Windows 7 Help Forums

Note

Do not run SeaTools on an SSD as the results will be invalid.

Run chkdsk Chkdsk - HDD Test - Windows 7 Help Forums

THREE

GPU TEST

Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 7 Help Forums

Note

Run Furmark for around 30 minutes.

Warning

Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.