I recently built my first new system it has a Gigabyte mobo GA-MA790GPT-UD3H AM3
Phenom II AM3 955 BE 3.2 was at 3.41 at crash,but I still do not believe this is the problem,the logs will tell more.It is back at 3.2 now(my OC was running 17 multiplier nothing else)
Corsair 4gb memory CMX4GX3M2A1600C9 running at 800mhz running what it is supposed to at 999 24 41 1.65 v , Zalman LED9900A cooler idle at 29 - 32c On prime95 torture test 6hrs All OK (with oc) and never over 46c, I have 64bit core temp to see temps. ATI HD4850 10.2 drivers (seems this all started after update of video drivers from 10.1)
I also have 2 Seagate 1TB HDs and 1TD WD Green HD,one of the Seagate HD's are a dynamic disk (full of videos no operating system) Not sure what else to tell
I was reading the system nfo under errors and man seems like a bunch to me.I just don't know how to read them.I hope you can help!Thanks
stin
I hate to say this but this crash was probably caused by memory corruption. see the anaylsis. I do note that the perfect disk driver was involved so it may just be perfect disk corrupting the memory.
I would remove PD just to check
re-run ram after PD is gone
run a system file check
type cmd in search>right click and run as admin>sfc /scannow
Let us know the results
If you are over clocking stop
Code:
Microsoft (R) Windows Debugger Version 6.11.0001.404 X86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\K\Desktop\Minidumps\022810-18891-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: SRV*d:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 7 Kernel Version 7600 MP (4 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 7600.16385.amd64fre.win7_rtm.090713-1255
Machine Name:
Kernel base = 0xfffff800`02e0d000 PsLoadedModuleList = 0xfffff800`0304ae50
Debug session time: Sun Feb 28 16:17:19.850 2010 (GMT-5)
System Uptime: 0 days 5:31:37.130
Loading Kernel Symbols
...............................................................
................................................................
............................
Loading User Symbols
Loading unloaded module list
.....
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80002e4803b, fffff88007742d00, 0}
Probably caused by : memory_corruption ( nt!MmGetSessionId+1b )
Followup: MachineOwner
---------
3: kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80002e4803b, Address of the exception record for the exception that caused the bugcheck
Arg3: fffff88007742d00, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
------------------
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
nt!MmGetSessionId+1b
fffff800`02e4803b 8b4008 mov eax,dword ptr [rax+8]
CONTEXT: fffff88007742d00 -- (.cxr 0xfffff88007742d00)
rax=ff7ff880021ee000 rbx=0000000000000000 rcx=fffffa80060cbb30
rdx=00000000ffffffff rsi=0000000000004c20 rdi=0000000000383748
rip=fffff80002e4803b rsp=fffff880077436e8 rbp=fffff88007743ca0
r8=0000000000000000 r9=0000000000000016 r10=fffffa80060cbb00
r11=fffffa8007ff85a0 r12=0000000000000000 r13=fffffa80060cbb30
r14=0000000000383b68 r15=0000000000000000
iopl=0 nv up ei pl nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010206
nt!MmGetSessionId+0x1b:
fffff800`02e4803b 8b4008 mov eax,dword ptr [rax+8] ds:002b:ff7ff880`021ee008=????????
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VISTA_DRIVER_FAULT
BUGCHECK_STR: 0x3B
PROCESS_NAME: PDEngine.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 0000000000000000 to fffff80002e4803b
STACK_TEXT:
fffff880`077436e8 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!MmGetSessionId+0x1b
FOLLOWUP_IP:
nt!MmGetSessionId+1b
fffff800`02e4803b 8b4008 mov eax,dword ptr [rax+8]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: nt!MmGetSessionId+1b
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
DEBUG_FLR_IMAGE_TIMESTAMP: 4a5bc600
STACK_COMMAND: .cxr 0xfffff88007742d00 ; kb
IMAGE_NAME: memory_corruption
FAILURE_BUCKET_ID: X64_0x3B_nt!MmGetSessionId+1b
BUCKET_ID: X64_0x3B_nt!MmGetSessionId+1b
Followup: MachineOwner
---------